H-MoSS (R) H-MOSS(R) Occupancy Sensors Hubbell Motion Sensing Switches Ceiling Sensor -- Dual Technology H-MoSS (R) Hu bbe ll M otion Sensing Switc he s Line Voltage Ceiling Sensors Dual TechnologyPassive Infrared/Ultrasonic The LVDT2000R series is a line voltage ceiling mount sensor that uses Dual Technology - Passive Infrared (PIR) and Ultrasonic, to turn lighting loads on and off based upon occupancy. Dual Technology ensures maximum reliability and minimizes false triggering. As a line voltage sensor, it does not need a separate control unit. The LVDT2000R is an excellent choice for areas where there is major or minor motion. Applications * Retrofit use with concrete or inaccessible ceilings which limit access to low voltage wiring. * New construction with line-voltage circuitry only. Features and Benefits Line Voltage Sensor with self contained power supply Accepts line voltage inputs of 120V AC (LVDT2000R120) or 277V AC (LVDT2000R277). No need for a separate control unit Dual Technology - Passive Infrared (PIR) and Ultrasonic Maximum reliability and minimum false triggering Five programming options Ability to customize settings for room size and environment by use of dip switches Adjustable time delay/sensitivity Sensor can easily be adjusted to meet the needs of the room occupants by use of dip switches 2,000 sq. ft. range Excellent coverage of a wide area www.hubbell-wiring.com H-MOSS(R) Occupancy Sensors Ceiling Sensor -- Dual Technology Line Voltage Ceiling Sensors Dual Technology Passive Infrared/Ultrasonic Ceiling Sensor 2000 sq. ft. coverage Description Catalog Number 120V AC; white LVDT2000R120 277V AC; white LVDT2000R277 LVDT2000R120 Specifications Sensitivity Fully adjustable: 0% - 100% Time Delay Fully adjustable: 30 seconds to 30 minutes Ultrasonic output Operating frequency: 32.7kHz Passive Infrared Multi-segmented, high-density FresnelTM lens LED Lamp Walk test indicator; Red - Infrared motion; Green - Ultrasonic motion Coverage 360; up to 2000 sq. ft Power Requirements LVDT2000R120 -- 120V AC 50/60 Hz LVDT2000R277 -- 277V AC 50/60 Hz Load Ratings LVDT2000R120 -- 2400 watts @ 120V AC 50/60 Hz LVDT2000R277 -- 5000 watts @ 277V AC 50/60 Hz Operating Environment Indoor use only Operating temperature: 32 to 122F (0 to 50C) Construction Housing: Rugged, high impact, injection molded plastic; Color-coded leads Size 4.74 inch (120.4mm) diameter; 3.875 inch (98.4mm) deep Weight 14.6 oz Color White Mounting Sensors may be mounted using a single gang mud ring attached to a 4 inch square electrical box; Recommended max mounting height: 12 ft. Certifications UL Warranty 5 years limited Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 185 Plains Road * Milford, CT 06461-2420 Phone (800) 288-6000 * FAX (800) 255-1031 * Website: www.hubbell-wiring.com Printed in U.S.A. Specifications subject to change without notice. H-MOSS(R) is a registered trademark of Hubbell Incorporated. WLDSHM001 www.hubbell-wiring.com H-MoSS (R) H-MOSS(R) Occupancy Sensors Hubbell Motion Sensing Switches Ceiling Sensor -- Ultrasonic Technology H-MoSS (R) Hu bbe ll M otion Sensing Switc he s Line Voltage Ceiling Sensors Ultrasonic technology The LVUS series of line voltage ceiling mount sensor uses Ultrasonic technology to turn lighting systems on and off based on occupancy. Ultrasonic technology senses occupancy by bouncing ultrasonic sound waves off objects in space and detecting a frequency shift between the emitted and reflected sound waves. Ultrasonic occupancy sensors are good at detecting minor motion (e.g. typing) and do not require an unobstructed line-ofsight, making them suitable for applications such as an office with cubicles or a restroom with stalls. As a line voltage sensor, it does not need a separate control unit. The LVUS series has four models - two which cover up to 1,500 sq. ft. and two which cover up to 2,000 sq. ft. Applications * Retrofit use with concrete or inaccessible ceilings which limit access to low voltage wiring. * New construction with line-voltage circuitry only. Features and Benefits Line Voltage Sensor with self contained power supply Accepts line voltage inputs from 120V AC (LVUS1500R120, LVUS2000R120) or 277V AC (LVUS1500R277, LVUS2000R277). No need for a separate control unit Ultrasonic technology Good at detecting minor motion and does not require unobstructed line-ofsight. Suitable for applications such as an office with cubicles or a restroom with stalls Adjustable time delay/sensitivity Sensor can easily be adjusted to meet the needs of the room occupants 1,500 sq. ft. range (LVUS1500R Series) 2,000 sq. ft. range (LVUS2000R Series) Excellent coverage of a wide area www.hubbell-wiring.com H-MOSS(R) Occupancy Sensors Ceiling Sensor -- Ultrasonic Technology Line Voltage Ceiling Sensors Ultrasonic Technology Ceiling Sensors 1500 sq. ft. coverage Description Coverage Catalog Number 120V AC; white 1,500 sq. ft. LVUS1500R120 277V AC; white 1,500 sq. ft. LVUS1500R277 120V AC; white 2,000 sq. ft. LVUS2000R120 277V AC; white 2,000 sq. ft. LVUS2000R277 LVUS1500R120 LVUS2000R120 Specifications Sensitivity Fully adjustable: 0% to 100% Time Delay Fully adjustable: 30 seconds to 30 minutes Ultrasonic output Operating frequency: 32.7kHz LED Lamp Walk test indicator - Red Coverage LVUS1500R120/277 -- Up to 1,500 sq. ft LVUS2000R120/277 -- Up to 2,000 sq. ft Power Requirements LVUS1500R120 -- 120V AC, 50/60 Hz LVUS1500R277 -- 277V AC, 50/60 Hz LVUS2000R120 -- 120V AC 50/60 Hz LVUS2000R277 -- 277V AC 50/60 Hz Electrical Ratings LVUS1500R120 -- 2400 watts @ 120V AC 50/60 Hz LVUS1500R277 -- 5000 watts @ 277V AC 50/60 Hz LVUS2000R120 -- 2400 watts @ 120V AC 50/60 Hz LVUS2000R277 -- 5000 watts @ 277V AC 50/60 Hz Operating Environment Indoor use only Operating temperature: 32 to 122F (0 to 50C) Construction Housing: Rugged, high impact, injection molded plastic; Color-coded leads Size LVUS1500R120/277 -- 4.87 inch (123.7mm) diameter; 1.65 inch (41.9mm) deep; LVUS2000R120/277 -- 5 inch (127.5mm) length, 2.87 inch (73.0mm) width, 3.00 inch (76.2mm) deep Weight 3.0 oz Color White Mounting Sensors may be mounted using a single gang mud ring attached to a 4 inch square electrical box; Reccommended max mounting height: 12 ft. Certifications LVUS1500R120/277 -- UL LVUS2000R120/277 -- cUL Listed Warranty 5 years limited Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 185 Plains Road * Milford, CT 06461-2420 Phone (800) 288-6000 * FAX (800) 255-1031 * Website: www.hubbell-wiring.com Printed in U.S.A. Specifications subject to change without notice. H-MOSS(R) is a registered trademark of Hubbell Incorporated. WLDSHM002 www.hubbell-wiring.com H-MoSS (R) H-MOSS(R) Occupancy Sensors Hubbell Motion Sensing Switches Ceiling Sensor -- Passive Infrared (PIR) H-MoSS (R) Hu bbe ll M otion Sensing Switc he s Line Voltage Ceiling Sensors Passive Infrared (PIR) The LVPR1500R is a line voltage ceiling mount sensor that uses Passive Infrared (PIR) technology to turn lighting loads on and off based upon occupancy. As a line voltage sensor, no control unit is required. The LVPR1500R is an excellent choice where long-range major motion detection is needed. It has a 360 field of view with low profile styling. It also contains an integral photocell control that increases energy savings by preventing lights from turning on when there is sufficient natural light. Applications * Retrofit use with concrete or inaccessible ceilings which limit access to low voltage wiring. * New construction with line-voltage circuitry only. Features and Benefits Line Voltage Sensor Accepts line voltage inputs from 120-347V AC; no need for a control unit Passive Infrared Technology Excellent for long range major motion detection Integral photocell control for daylight harvesting Increases energy savings by preventing the lights from turning on when there is sufficient natural light 360 field of view Excellent coverage of a wide area; up to 1,500 sq. ft. Low profile styling Device sits only 1 in. off of ceiling; takes up minimal space www.hubbell-wiring.com H-MOSS(R) Occupancy Sensors Ceiling Sensor -- Passive Infrared (PIR) Line Voltage Ceiling Sensor Passive Infrared (PIR) Description Coverage 120-347V AC with photocell and isolated relay; white 1,500 sq. ft. Catalog Number LVPR1500R LVPR1500R Specifications Sensitivity Fully adjustable: 20% to 100% Time Delay Fully adjustable: 30 seconds to 30 minutes LED Lamp Walk test indicator -- Red Integral Photocell Adjustable ambient light override ranges from 5 foot candles (5 lux) to 200 foot candles (200 lux) Coverage 360 1500 sq. ft. at 10 ft. mounting height Power Requirement 120-347V AC Load Ratings 800 watts Incandescent, 1000 watts fluorescent @ 120V AC; 1800 watts fluorescent @ 277V AC; 2200 watts fluorescent @ 347V AC Operating Environment Indoor use only Operating temperature: 32 to 131F (0 to 55C) 0% to 95% relative humidity, non-condensing Construction Housing: Rugged, high impact, injection molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6 inches long Size Weight Size: 4.0 inch diameter, 1.9 inch deep (101mm diameter, 48mm deep) Weight: 3.5 oz Color White Mounting LVPR1500R sensors may be mounted using a 3.0 round mud ring attached to a 4-inch square electrical box; Recommended max mounting height: 12 ft. Certifications UL and cUL Listed Warranty 5 years limited Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 185 Plains Road * Milford, CT 06461-2420 Phone (800) 288-6000 * FAX (800) 255-1031 * Website: www.hubbell-wiring.com Printed in U.S.A. Specifications subject to change without notice. H-MOSS(R) is a registered trademark of Hubbell Incorporated. WLDSHM003 www.hubbell-wiring.com H-MoSS (R) H-MOSS(R) Occupancy Sensors Hubbell Motion Sensing Switches Ceiling Sensor -- Passive Infrared (PIR) H-MoSS (R) Hu bbe ll M otion Sensing Switc he s Low Profile Passive Infrared Ceiling Sensor The LVPR1500RP is a low voltage ceiling sensor that uses Passive Infrared technology(PIR) to turn lighting loads on and off based upon occupancy. It is excellent when longrange major motion detection is needed. The LVPR1500RP is excellent for use with energy management systems. The auxiliary relay can be used with numerous manufacturers of building systems to signal that an area is occupied, i.e. tell the HVAC system to turn on the air/heat. Applications * Excellent for use with energy management systems in office buildings * Signals HVAC that there is occupancy and that air/heat should be turned on * Can be used to indicate occupancy with an alarm system Features and Benefits Passive Infrared Technology Excellent for long range major motion detection Integral photocell control for Daylight Harvesting Increases energy savings by preventing the lights from turning on when there is sufficient natural light 360 field of view Excellent coverage of a wide area; up to 1,500 sq. ft. Low profile styling Device sits only 1 in. off of ceiling; takes up minimal space Auxiliary Relay version Low Voltage Ceiling Sensor with relay- 24V DC 10mA; uses CU300A control unit www.hubbell-wiring.com H-MOSS(R) Occupancy Sensors Ceiling Sensor -- Passive Infrared (PIR) Low Voltage Ceiling Sensor Passive Infrared (PIR) Description Coverage Passive Infrared Low Voltage 1,500 sq. ft. Ceiling Sensor, with Relay; white; Must be used with CU300A control unit Catalog Number LVPR1500RP LVPR1500RP Specifications Sensitivity Fully adjustable: 20% to 100% Time Delay Fully adjustable: 30 seconds to 30 minutes LED Lamp Walk test indicator -- Red Integral Photocell Adjustable ambient light override ranges from 5 foot candles (5 lux) to 200 foot candles (200 lux) Auxiliary Relay SPDT, 1 A rated @ 24V DC / 120V AC dry contact Coverage 360 1500 sq. ft. at 10 ft. mounting height Power Requirement 24V DC, 10 mA from Hubbell CU series control unit Output 24V DC active high logic control signal with short circuit protection and optional dry contact Operating Environment Indoor use only Operating temperature: 32 to 131F (0 to 55C) 0% to 95% relative humidity, non-condensing Construction Housing: Rugged, high impact, injection molded plastic KJB ABS Cycolac (UL-945VA) flame class rating, UV inhibitors Color-coded leads are 6 inches long Size Weight Size: 4.0 inch diameter, 1.9 inch deep (101mm diameter, 48mm deep) Weight: 3.5 oz Color White Mounting Metal mounting ring provided Certifications UL and cUL Listed Warranty 5 years limited Hubbell Wiring Device-Kellems * Hubbell Incorporated (Delaware) * 185 Plains Road * Milford, CT 06461-2420 Phone (800) 288-6000 * FAX (800) 255-1031 * Website: www.hubbell-wiring.com Printed in U.S.A. Specifications subject to change without notice. H-MOSS(R) is a registered trademark of Hubbell Incorporated. WLDSHM004 www.hubbell-wiring.com