www.hubbell-wiring.com
H-MOSS® Occupancy Sensors
Ceiling Sensor — Dual Technology
Line Voltage Ceiling Sensors
Dual Technology-
Passive Infrared/Ultrasonic
The LVDT2000R series is a line voltage ceiling mount
sensor that uses Dual Technology - Passive Infrared (PIR)
and Ultrasonic, to turn lighting loads on and off based
upon occupancy. Dual Technology ensures maximum
reliability and minimizes false triggering. As a line voltage
sensor, it does not need a separate control unit. The
LVDT2000R is an excellent choice for areas where there is
major or minor motion.
Features and Benets
Line Voltage Sensor with self contained
power supply
Accepts line voltage inputs of 120V AC (LVDT2000R120) or
277V AC (LVDT2000R277). No need for a separate control unit
Dual Technology - Passive Infrared (PIR)
and Ultrasonic
Maximum reliability and minimum false triggering
Five programming options Ability to customize settings for room size and environment by use of
dip switches
Adjustable time delay/sensitivity Sensor can easily be adjusted to meet the needs of the room occupants by
use of dip switches
2,000 sq. ft. range Excellent coverage of a wide area
Hubbell Motion Sensing Switches
®
H-MoSS
H-MoSS®
H
u
b
b
e
l
l
M
o
t
i
o
n
S
e
n
s
i
n
g
S
w
i
t
c
h
e
s
Applications
Retrotusewithconcreteorinaccessibleceilingswhichlimitaccesstolowvoltagewiring.
New construction with line-voltage circuitry only.
H-MOSS® Occupancy Sensors
Ceiling Sensor — Dual Technology
www.hubbell-wiring.com
LVDT2000R120
Line Voltage Ceiling Sensors
Dual Technology
Passive Infrared/Ultrasonic Ceiling Sensor
2000 sq. ft. coverage
Description Catalog Number
120V AC; white LVDT2000R120
277V AC; white LVDT2000R277
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 185 Plains Road • Milford, CT 06461-2420
Phone (800) 288-6000 • FAX (800) 255-1031 • Website: www.hubbell-wiring.com
Printed in U.S.A. Specications subject to change without notice. H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM001
Specications
Sensitivity Fully adjustable: 0% - 100%
Time Delay Fully adjustable: 30 seconds to 30 minutes
Ultrasonic output Operating frequency: 32.7kHz
Passive Infrared Multi-segmented, high-density Fresnel™ lens
LED Lamp Walk test indicator;
Red – Infrared motion;
Green – Ultrasonic motion
Coverage 360˚;upto2000sq.ft
Power Requirements LVDT2000R120 — 120V AC 50/60 Hz
LVDT2000R277 — 277V AC 50/60 Hz
Load Ratings LVDT2000R120 — 2400 watts @ 120V AC 50/60 Hz
LVDT2000R277 — 5000 watts @ 277V AC 50/60 Hz
Operating Environment Indoor use only
Operatingtemperature:32˚to122˚F(0˚to50˚C)
Construction Housing: Rugged, high impact, injection molded plastic;
Color-coded leads
Size 4.74 inch (120.4mm) diameter; 3.875 inch (98.4mm) deep
Weight 14.6 oz
Color White
Mounting Sensors may be mounted using a single gang mud ring attached to a 4 inch square
electrical box; Recommended max mounting height: 12 ft.
Certications UL
Warranty 5 years limited
www.hubbell-wiring.com
H-MOSS® Occupancy Sensors
Ceiling Sensor — Ultrasonic Technology
Line Voltage Ceiling Sensors
Ultrasonic technology
The LVUS series of line voltage ceiling mount
sensor uses Ultrasonic technology to turn lighting
systems on and off based on occupancy.
Ultrasonic technology senses occupancy by
bouncing ultrasonic sound waves off objects in
space and detecting a frequency shift between
the emitted and reected sound waves. Ultrasonic
occupancy sensors are good at detecting minor motion
(e.g. typing) and do not require an unobstructed line-of-
sight, making them suitable for applications such as an ofce
with cubicles or a restroom with stalls. As a line voltage sensor, it
does not need a separate control unit. The LVUS series has four
models - two which cover up to 1,500 sq. ft. and two which cover
up to 2,000 sq. ft.
Features and Benets
Line Voltage Sensor with self contained
power supply
Accepts line voltage inputs from 120V AC (LVUS1500R120, LVUS2000R120)
or 277V AC (LVUS1500R277, LVUS2000R277). No need for a separate
control unit
Ultrasonic technology Good at detecting minor motion and does not require unobstructed line-of-
sight. Suitable for applications such as an ofce with cubicles or a restroom
with stalls
Adjustable time delay/sensitivity Sensor can easily be adjusted to meet the needs of the room occupants
1,500 sq. ft. range (LVUS1500R Series)
2,000 sq. ft. range (LVUS2000R Series)
Excellent coverage of a wide area
Hubbell Motion Sensing Switches
®
H-MoSS
H-MoSS®
H
u
b
b
e
l
l
M
o
t
i
o
n
S
e
n
s
i
n
g
S
w
i
t
c
h
e
s
Applications
Retrot use with concrete or inaccessible ceilings which limit access to low voltage wiring.
New construction with line-voltage circuitry only.
H-MOSS® Occupancy Sensors
Ceiling Sensor — Ultrasonic Technology
www.hubbell-wiring.com
LVUS1500R120
Line Voltage Ceiling Sensors
Ultrasonic Technology Ceiling Sensors
1500 sq. ft. coverage
Description Coverage Catalog Number
120V AC; white 1,500 sq. ft. LVUS1500R120
277V AC; white 1,500 sq. ft. LVUS1500R277
120V AC; white 2,000 sq. ft. LVUS2000R120
277V AC; white 2,000 sq. ft. LVUS2000R277
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 185 Plains Road • Milford, CT 06461-2420
Phone (800) 288-6000 • FAX (800) 255-1031 • Website: www.hubbell-wiring.com
Printed in U.S.A. Specications subject to change without notice. H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM002
Specications
Sensitivity Fully adjustable: 0% to 100%
Time Delay Fully adjustable: 30 seconds to 30 minutes
Ultrasonic output Operating frequency: 32.7kHz
LED Lamp Walk test indicator - Red
Coverage LVUS1500R120/277 — Up to 1,500 sq. ft
LVUS2000R120/277 — Up to 2,000 sq. ft
Power Requirements LVUS1500R120 — 120V AC, 50/60 Hz
LVUS1500R277 — 277V AC, 50/60 Hz
LVUS2000R120 — 120V AC 50/60 Hz
LVUS2000R277 — 277V AC 50/60 Hz
Electrical Ratings LVUS1500R120 — 2400 watts @ 120V AC 50/60 Hz
LVUS1500R277 — 5000 watts @ 277V AC 50/60 Hz
LVUS2000R120 — 2400 watts @ 120V AC 50/60 Hz
LVUS2000R277 — 5000 watts @ 277V AC 50/60 Hz
Operating Environment Indoor use only
Operating temperature: 32˚ to 122F˚ (0˚ to 50˚C)
Construction Housing: Rugged, high impact, injection molded plastic;
Color-coded leads
Size
LVUS1500R120/277 — 4.87 inch (123.7mm) diameter; 1.65 inch (41.9mm) deep;
LVUS2000R120/277 — 5 inch (127.5mm) length, 2.87 inch (73.0mm) width, 3.00 inch
(76.2mm) deep
Weight 3.0 oz
Color White
Mounting Sensors may be mounted using a single gang mud ring attached to a 4 inch square
electrical box; Reccommended max mounting height: 12 ft.
Certications LVUS1500R120/277 — UL
LVUS2000R120/277 — cUL Listed
Warranty 5 years limited
LVUS2000R120
www.hubbell-wiring.com
H-MOSS® Occupancy Sensors
Ceiling Sensor — Passive Infrared (PIR)
Line Voltage Ceiling Sensors
Passive Infrared (PIR)
The LVPR1500R is a line voltage ceiling mount sensor that
uses Passive Infrared (PIR) technology to turn lighting
loads on and off based upon occupancy. As a line voltage
sensor, no control unit is required. The LVPR1500R is an
excellent choice where long-range major motion detection
is needed. It has a 360° eld of view with low prole
styling. It also contains an integral photocell control that
increases energy savings by preventing lights from turning
on when there is sufcient natural light.
Features and Benets
Line Voltage Sensor Accepts line voltage inputs from 120-347V AC; no need for a control unit
Passive Infrared Technology Excellent for long range major motion detection
Integral photocell control for
daylight harvesting
Increases energy savings by preventing the lights from turning on when
there is sufcient natural light
360° eld of view Excellent coverage of a wide area; up to 1,500 sq. ft.
Low prole styling Device sits only 1 in. off of ceiling; takes up minimal space
Hubbell Motion Sensing Switches
®
H-MoSS
H-MoSS®
H
u
b
b
e
l
l
M
o
t
i
o
n
S
e
n
s
i
n
g
S
w
i
t
c
h
e
s
Applications
Retrot use with concrete or inaccessible ceilings which limit access to low voltage wiring.
New construction with line-voltage circuitry only.
H-MOSS® Occupancy Sensors
Ceiling Sensor — Passive Infrared (PIR)
www.hubbell-wiring.com
LVPR1500R
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 185 Plains Road • Milford, CT 06461-2420
Phone (800) 288-6000 • FAX (800) 255-1031 • Website: www.hubbell-wiring.com
Printed in U.S.A. Specications subject to change without notice. H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM003
Specications
Sensitivity Fully adjustable: 20% to 100%
Time Delay Fully adjustable: 30 seconds to 30 minutes
LED Lamp Walk test indicator — Red
Integral Photocell Adjustable ambient light override ranges from 5 foot candles
(5 lux) to 200 foot candles (200 lux)
Coverage 360˚
1500 sq. ft. at 10 ft. mounting height
Power Requirement 120-347V AC
Load Ratings 800 watts Incandescent, 1000 watts uorescent @ 120V AC;
1800 watts uorescent @ 277V AC; 2200 watts uorescent @ 347V AC
Operating Environment Indoor use only
Operating temperature: 32˚ to 131˚F (0˚ to 55˚C)
0% to 95% relative humidity, non-condensing
Construction Housing: Rugged, high impact, injection molded plastic KJB
ABS Cycolac (UL-945VA) ame class rating, UV inhibitors
Color-coded leads are 6 inches long
Size
Weight
Size: 4.0 inch diameter, 1.9 inch deep (101mm diameter, 48mm deep)
Weight: 3.5 oz
Color White
Mounting LVPR1500R sensors may be mounted using a 3.0 round mud ring attached to a
4-inch square electrical box; Recommended max mounting height: 12 ft.
Certications UL and cUL Listed
Warranty 5 years limited
Line Voltage Ceiling Sensor
Passive Infrared (PIR)
Description Coverage Catalog Number
120-347V AC with photocell and
isolated relay; white 1,500 sq. ft. LVPR1500R
www.hubbell-wiring.com
H-MOSS® Occupancy Sensors
Ceiling Sensor — Passive Infrared (PIR)
Low Prole Passive Infrared Ceiling Sensor
The LVPR1500RP is a low voltage ceiling sensor that uses
Passive Infrared technology(PIR) to turn lighting loads on
and off based upon occupancy. It is excellent when long-
range major motion detection is needed.
The LVPR1500RP is excellent for use with energy
management systems. The auxiliary relay can be used
with numerous manufacturers of building systems to
signal that an area is occupied, i.e. tell the HVAC system
to turn on the air/heat.
Features and Benets
Passive Infrared Technology Excellent for long range major motion detection
Integral photocell control for Daylight
Harvesting
Increases energy savings by preventing the lights from turning on when
there is sufcient natural light
360° eld of view Excellent coverage of a wide area; up to 1,500 sq. ft.
Low prole styling Device sits only 1 in. off of ceiling; takes up minimal space
Auxiliary Relay version Low Voltage Ceiling Sensor with relay- 24V DC 10mA; uses CU300A
control unit
Hubbell Motion Sensing Switches
®
H-MoSS
H-MoSS®
H
u
b
b
e
l
l
M
o
t
i
o
n
S
e
n
s
i
n
g
S
w
i
t
c
h
e
s
Applications
Excellent for use with energy management systems in ofce buildings
Signals HVAC that there is occupancy and that air/heat should be turned on
Can be used to indicate occupancy with an alarm system
H-MOSS® Occupancy Sensors
Ceiling Sensor — Passive Infrared (PIR)
www.hubbell-wiring.com
Hubbell Wiring Device-Kellems • Hubbell Incorporated (Delaware) • 185 Plains Road • Milford, CT 06461-2420
Phone (800) 288-6000 • FAX (800) 255-1031 • Website: www.hubbell-wiring.com
Printed in U.S.A. Specications subject to change without notice. H-MOSS® is a registered trademark of Hubbell Incorporated. WLDSHM004
LVPR1500RP
Low Voltage Ceiling Sensor
Passive Infrared (PIR)
Description Coverage Catalog Number
Passive Infrared Low Voltage
Ceiling Sensor, with Relay; white;
Must be used with CU300A
control unit
1,500 sq. ft. LVPR1500RP
Specications
Sensitivity Fully adjustable: 20% to 100%
Time Delay Fully adjustable: 30 seconds to 30 minutes
LED Lamp Walk test indicator — Red
Integral Photocell Adjustable ambient light override ranges from 5 foot candles
(5 lux) to 200 foot candles (200 lux)
Auxiliary Relay SPDT, 1 A rated @ 24V DC / 120V AC dry contact
Coverage 360˚
1500 sq. ft. at 10 ft. mounting height
Power Requirement 24V DC, 10 mA from Hubbell CU series control unit
Output 24V DC active high logic control signal with short circuit
protection and optional dry contact
Operating Environment Indoor use only
Operating temperature: 32˚ to 131˚F (0˚ to 55˚C)
0% to 95% relative humidity, non-condensing
Construction Housing: Rugged, high impact, injection molded plastic KJB
ABS Cycolac (UL-945VA) ame class rating, UV inhibitors
Color-coded leads are 6 inches long
Size
Weight
Size: 4.0 inch diameter, 1.9 inch deep (101mm diameter, 48mm deep)
Weight: 3.5 oz
Color White
Mounting Metal mounting ring provided
Certications UL and cUL Listed
Warranty 5 years limited