PS-12260 12 Volt 26.0 AH Features * A bsorbent Glass Mat (AGM) technology for superior performance alve regulated, spill proof construction allows safe * V operation in any position * Power/volume ratio yielding unrivaled energy density * Rugged impact resistant ABS case and cover (UL94-HB) * A pproved for transport by air. D.O.T., I.A.T.A., F.A.A. and C.A.B. certified * U.L. recognized under file number MH 20845 (mm) *F 2 - Quick disconnect tabs, 0.250" x 0.032" - Mate with AMP. INC FASTON "250" series *N B2: Tin plated brass post with 5mm nut & bolt connectors * T 12 - Threaded insert with 5mm stud F2 NB 3.4 6.35 7.95 T12 Performance Specifications 4.5 Terminals Nominal Voltage......................................................................... 12 volts (6 cells) 14 Nominal Capacity 2 6 12 0.8 12mm M5 6mm 20-hr. (1.3A to 10.50 volts) ............................................................. 26.0 AH 10-hr. (2.4A to 10.50 volts) .............................................................. 24.0 AH 5-hr. (4.4A to 10.20 volts) ............................................................. 22.0 AH 1-hr. (16.1A to 9.00 volts) .............................................................. 16.1 AH 15-min. (51A to 9.00 volts).................................................................. 12.8 AH Approximate Weight ........................................................... 17.00 lbs. (7.71 kg) Physical Dimensions: in (mm) Energy Density (20-hr. rate) ................................. 1.39 W-h/in3 (84.64 W-h/l) Specific Energy (20-hr. rate) . ............................ 18.35 W-h/lb (40.46 W-h/kg) Internal Resistance (approx.) . ..................................................... 14 milliohms Max Discharge Current (7 Min.) ................................................ 78.0 amperes W Max Short-Duration Discharge Current (10 Sec.)................. 260.0 amperes Shelf Life (% of nominal capacity at 68F (20C)) 1 Month ...................................................................................................... 97% 3 Months...................................................................................................... 91% 6 Months . ................................................................................................... 83% Sealed Rechargeable Battery HT MODEL PS-12260 NB H 12 Volt 26.0 Amp. Hr. BA ST B E R MU Pb YCL ED EC MH20845 www.power-sonic.com TTE RY (R) NONSPILLABLE L L: 6.56 (167) W: 6.97 (177) H: 4.92 (125) HT: 4.92 (125) Operating Temperature Range Charge... ........................................................... -4F (-20C) to 122F (50C) Discharge........................................................ -40F (-40C) to 140F (60C) Case....................................................................................................... ABS Plastic Power-Sonic Chargers.....PSC-122000A, 124000A, 122000A-C, 124000A-C Tolerances are +/- 0.04 in. (+/- 1mm) and +/- 0.08 in. (+/- 2mm) for height dimensions. All data subject to change without notice. To ensure safe and efficient operation always refer to the latest edition of our Technical Manual, as published on our website. All data subject to change without notice. www.power-sonic.com PS-12260 12 Volt 26.0 AH (R) Discharge Characteristics 100 80 Charging before use is necessary to help recover full capacity. 5oC (41oF) 60 o 30 C o (86 F) 40oC (104oF) 40 0 14.0 Charging is not necessary unless 100% of capacity is required. 0 2 4 6 8 10 Charge may fail to restore full capacity. Do not let batteries reach this state. 20oC (68oF) 12 14 16 18 20 o 12.0 11.0 10.0 9.0 2.4 6 12 24 36 48 1 2 Discharge Time 4 6 8 10 20 4 0 h Life Characteristics in Stand-By Use 5 Retention Capacity (%) h 26 min 20 15 10 Discharge Time 1.30 52 1.2 Discharge Time vs. Discharge Current 2.6 5.2 13 Final Voltage 8.0 Standing Period (Months) o Ambient Temperature 20 C (68 F) 13.0 Terminal Voltage (V) Capacity Retention Ratio (%) Shelf Life & Storage Final Voltage 10.5V 2 10.2V 1 9.6V min 30 9.0V 10 5 o 8.1V 1.30 2.6 5.2 13 26 80 60 20 0 o Note: Due to the self-discharge characteristics of this type of battery, it is imperative that they be charged within 6 months of storage, otherwise permanent loss of capacity might occur as a result of sulfation. Chargers 1 2 3 4 Life Characteristics in Cyclic Use 52 120 Retention Capacity (%) "Float" or "Stand-By" Service: Hold battery across constant voltage source of 13.5 to 13.8 volts continuously. When held at this voltage, the battery will seek its own current level and maintain itself in a fully charged condition. 0 Years Discharge Current (A) Cycle Applications: Limit initial current to 7.8A. Charge until battery voltage (under charge) reaches 14.4 to 14.7 volts at 68F (20C). Hold at 14.4 to 14.7 volts until current drops to under 260mA. Battery is fully charged under these conditions, and charger should be disconnected or switched to "float" voltage. Float Charging Voltage 2.25 - 2.30 V/Cell 40 40 C (104 F) o o 20 C (68 F) o o 0 C (32 F) Charging Ambient Temperature 20C (68F) 100 100 80 60 Discharge Depth 100% Discharge Depth 50% Discharge Depth 30% 40 1. Discharge Current 0.2C (Final Voltage 1.7V/Cell) 2. Charge Current: 0.1C 3. Ambient Temperature: 20oC to 25oC (68oF to 77oF) 20 0 0 200 400 600 800 1000 1200 Number of Cycles Further Information Power-Sonic offers a wide range of chargers suitable for batteries up to 100AH. Please refer to the Charger Selection Guide in our specification sheets for "C-Series Switch Mode Chargers" and "Transformer Type A and F Series". Please contact our Technical department for advice if you have difficulty in locating suitable models. Please refer to our website www.power-sonic.com for a complete range of useful downloads, such as product catalogs, material safety data sheets (MSDS), ISO certification, etc.. Contact Information DOMESTIC SALES Tel: +1-619-661-2020 Fax: +1-619-661-3650 national-sales@power-sonic.com www.power-sonic.com CUSTOMER SERVICE Tel: +1-619-661-2030 Fax: +1-619-661-3648 customer-service@power-sonic.com TECHNICAL SUPPORT Tel: +1-619-661-2020 Fax: +1-619-661-3648 support@power-sonic.com INTERNATIONAL SALES Tel: +1-650-364-5001 Fax: +1-650-366-3662 international-sales@power-sonic.com CORPORATE OFFICE * 7550 Panasonic Way * San Diego, CA 92154 * USA * Tel: +1-619-661-2020 * Fax: +1-619-661-3650 (c) 2012. Power-Sonic Corporation. All rights reserved. All trademarks are the property of their respective owners. 0812 1M Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Power-Sonic: PS-12260F2 PS-12260NB