DATA SHEET SMPA1302-079LF: Switch and Attenuator Plastic-Packaged PIN Diode Automotive Applications Infotainment Navigation Telematics Garage door openers Wireless control systems Features Description AEC-Q101 qualified Designed for large signal switching applications Designed for low distortion attenuator applications Low capacitance (< 0.30 pF) for high isolation performance Package rated MSL1 @ 260 C per JEDEC J-STD-020 TM Skyworks Green products are compliant with all applicable legislation and are halogen-free. For additional information, refer to Skyworks Definition of GreenTM, document number SQ04-0074. The SMPA1302-079LF plastic-packaged, surface-mountable, low capacitance (0.3 pF) silicon PIN diode is designed for switch and attenuator applications used in vehicle infotainment. The nominal 50 m I region width, combined with a maximum resistance of 3 at 10 mA, makes these diodes useful in large signal switch applications. The low capacitance (< 0.30 pF) is ideal for high isolation switching, and the long lifetime (700 ns) makes this part ideal for low distortion attenuator applications. Table 1 describes the SMPA1302-079LF package and marking. Table 1. Package and Marking Single SC-79 GreenTM SMPA1302-079LF Marking: Cathode and C3 LS = 0.7 nH The Pb-free symbol or "LF" in the part number denotes a lead-free, RoHScompliant package unless otherwise noted as GreenTM. Tin/lead (Sn/Pb) packaging is not recommended for new designs. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203192C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 21, 2018 1 DATA SHEET * SMPA1302-079LF PIN DIODE Electrical and Mechanical Specifications The absolute maximum ratings of the SMPA1302-079LF are provided in Table 2. Electrical specifications are provided in Table 3. Resistance versus temperature measurements are provided in Table 4. Typical performance characteristics of the SMPA1302-079LF are illustrated in Figures 1 to 4. Table 2. SMPA1302-079LF Absolute Maximum Ratings1 Maximum Units Reverse voltage Parameter VR Symbol 200 V Power dissipation @ 25 C lead temperature PD 250 mW Storage temperature TSTG -65 +150 C Operating temperature TA -65 +150 C Electrostatic discharge: ESD 1000 2000 V Human Body Model (HBM), Class 1C Minimum 1 Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device. ESD HANDLING: Although this device is designed to be as robust as possible, electrostatic discharge (ESD) can damage this device. This device must be protected at all times from ESD when handling or transporting. Static charges may easily produce potentials of several kilovolts on the human body or equipment, which can discharge without detection. Industry-standard ESD handling precautions should be used at all times. Table 3. SMPA1302-079LF Electrical Specifications1 (TA = +25 C, Unless Otherwise Noted) Parameter Symbol Test Condition Min Typical Max Units Reverse current IR VR = 200 V 10 A Capacitance CT f = 1 MHz, V = 30 V 0.3 pF Resistance RS f = 100 MHz 20 3 1.5 I = 1 mA I = 10 mA I = 100 mA 15 Forward voltage VF IF = 10 mA 0.8 Carrier lifetime TI IF = 10 mA 0.7 s 50 m I region width 1 Performance is guaranteed only under the conditions listed in this table. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 2 June 21, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203192C V DATA SHEET * SMPA1302-079LF PIN DIODE Table 4. Resistance vs Temperature @ 100 MHz IF (mA) RS @ -55 C () RS @ -15 C () RS @ +25 C () RS @ +65 C () RS @ +100 C () 0.02 599 653 692 715 722 0.10 123 135 143 154 161 0.3 42.2 46.6 49.7 54.3 56.8 1.0 13.5 15.0 16.2 17.9 18.8 10 2.0 2.3 2.6 2.9 3.0 20 1.34 1.50 1.70 2.00 2.00 100 0.60 0.74 1.00 1.10 1.10 Typical Performance Characteristics 1000 100 100 10 Forward Current (mA) Series Resistance () (TA = +25 C, Unless Otherwise Noted) 10 1 1 0.1 0.01 0.1 0.01 0.1 1 10 100 400 600 700 800 900 1000 Forward Voltage (mV) Forward Current (mA) Figure 2. DC Characteristic Figure 1. Series Resistance vs Current @ 100 MHz 0.8 300 0.7 250 1 MHz 0.6 Conductance (S) Capacitance (pF) 500 0.5 0.4 0.3 1 GHz 100 MHz 0.2 200 0V 150 10 V 100 50 0.1 40 V 0 0 0 1 2 5 10 20 50 Reverse Voltage (V) Figure 3. Capacitance vs Reverse Voltage 100 0 500 1000 1500 2000 Frequency (MHz) Figure 4. Conductance vs Frequency and Reverse Voltage Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203192C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 21, 2018 3 DATA SHEET * SMPA1302-079LF PIN DIODE Package Dimensions Package and Handling Information Package dimensions are shown in Figure 5, and tape and reel dimensions are provided in Figure 6. Instructions on the shipping container label regarding exposure to moisture after the container seal is broken must be followed. Otherwise, problems related to moisture absorption may occur when the part is subjected to high temperature during solder assembly. The SMPA1302-079LF is rated to Moisture Sensitivity Level 1 (MSL1) at 260 C. It can be used for lead or lead-free soldering. For additional information, refer to the Skyworks Application Note, Solder Reflow Information, document number 200164. Care must be taken when attaching this product, whether it is done manually or in a production solder reflow environment. Production quantities of this product are shipped in a standard tape and reel format. Polarity Indicator Area Box or Bar 0.010 (0.25 mm) Min. 0.014 (0.35 mm) Max. 0.006 (0.15 mm) Min. 1 2 0.028 (0.70 mm) Min. 0.035 (0.90 mm) Max. 0.060 (1.50 mm) Min. 0.067 (1.70 mm) Max. 0.043 (1.10 mm) Min. 0.051 (1.30 mm) Max. 10 Max. 0.020 (0.50 mm) Min. 0.028 (0.70 mm) Max. 0.003 (0.07 mm) Min. 0.008 (0.20 mm) Max. 10 Max. Dimensions are in inches (millimeters shown in parentheses) S1652 Figure 5. SC-79 Package Dimension Drawing Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 4 June 21, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203192C DATA SHEET * SMPA1302-079LF PIN DIODE O1.50 0.10 4.00 0.10 4.00 0.10 2.00 0.05 0.229 0.02 (T) 1.75 0.10 B A B Pin 1 Indicator 0.80 0.05 (Ko) B 8.00 0.20 A 3.50 0.05 1.40 0.05 1.95 0.05 (Bo) 2 Max O0.50 0.05 0.39 0.05 2o Max 0.90 0.05 (Ao) A Notes: 1. Carrier tape: black conductive polycarbonate or polystyrene. 2. Cover tape material: transparent conductive PSA. 3. Cover tape size: 5.4 mm width. 4. ESD-surface resistivity is 1 x 108 Ohms/square per EIA, JEDEC TNR Specification. 4. All measurements are in millimeters. S2929 Figure 6. SC-79 Tape and Reel Dimensions Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 203192C * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * June 21, 2018 5 DATA SHEET * SMPA1302-079LF PIN DIODE Copyright (c) 2014-2015, 2018 Skyworks Solutions, Inc. All Rights Reserved. Information in this document is provided in connection with Skyworks Solutions, Inc. ("Skyworks") products or services. These materials, including the information contained herein, are provided by Skyworks as a service to its customers and may be used for informational purposes only by the customer. Skyworks assumes no responsibility for errors or omissions in these materials or the information contained herein. Skyworks may change its documentation, products, services, specifications or product descriptions at any time, without notice. Skyworks makes no commitment to update the materials or information and shall have no responsibility whatsoever for conflicts, incompatibilities, or other difficulties arising from any future changes. No license, whether express, implied, by estoppel or otherwise, is granted to any intellectual property rights by this document. Skyworks assumes no liability for any materials, products or information provided hereunder, including the sale, distribution, reproduction or use of Skyworks products, information or materials, except as may be provided in Skyworks Terms and Conditions of Sale. THE MATERIALS, PRODUCTS AND INFORMATION ARE PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, WHETHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, INCLUDING FITNESS FOR A PARTICULAR PURPOSE OR USE, MERCHANTABILITY, PERFORMANCE, QUALITY OR NON-INFRINGEMENT OF ANY INTELLECTUAL PROPERTY RIGHT; ALL SUCH WARRANTIES ARE HEREBY EXPRESSLY DISCLAIMED. SKYWORKS DOES NOT WARRANT THE ACCURACY OR COMPLETENESS OF THE INFORMATION, TEXT, GRAPHICS OR OTHER ITEMS CONTAINED WITHIN THESE MATERIALS. SKYWORKS SHALL NOT BE LIABLE FOR ANY DAMAGES, INCLUDING BUT NOT LIMITED TO ANY SPECIAL, INDIRECT, INCIDENTAL, STATUTORY, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOST REVENUES OR LOST PROFITS THAT MAY RESULT FROM THE USE OF THE MATERIALS OR INFORMATION, WHETHER OR NOT THE RECIPIENT OF MATERIALS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. Skyworks products are not intended for use in medical, lifesaving or life-sustaining applications, or other equipment in which the failure of the Skyworks products could lead to personal injury, death, physical or environmental damage. Skyworks customers using or selling Skyworks products for use in such applications do so at their own risk and agree to fully indemnify Skyworks for any damages resulting from such improper use or sale. Customers are responsible for their products and applications using Skyworks products, which may deviate from published specifications as a result of design defects, errors, or operation of products outside of published parameters or design specifications. Customers should include design and operating safeguards to minimize these and other risks. Skyworks assumes no liability for applications assistance, customer product design, or damage to any equipment resulting from the use of Skyworks products outside of stated published specifications or parameters. Skyworks and the Skyworks symbol are trademarks or registered trademarks of Skyworks Solutions, Inc. or its subsidiaries in the United States and other countries. Third-party brands and names are for identification purposes only, and are the property of their respective owners. Additional information, including relevant terms and conditions, posted at www.skyworksinc.com, are incorporated by reference. Skyworks Solutions, Inc. * Phone [781] 376-3000 * Fax [781] 376-3100 * sales@skyworksinc.com * www.skyworksinc.com 6 June 21, 2018 * Skyworks Proprietary Information * Products and Product Information are Subject to Change Without Notice * 203192C