Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Table of Contents Introduction ................................................................................................................................ 2 T200 Ident Printer (Thermal Transfer) ....................................................................................... 3 Cable Identification markers ................................................................................................... 3 T200 Ident Printer (Thermal Transfer) ....................................................................................... 4 Cable Identification Continuous Tube..................................................................................... 4 T200 Ident Printer (Thermal Transfer) ....................................................................................... 5 Labels..................................................................................................................................... 5 T208M Printer and T212M-Printer (Thermal Transfer)............................................................... 6 Cable Identification markers ................................................................................................... 6 Labels..................................................................................................................................... 6 T200- Label Printer (Thermal Transfer) ..................................................................................... 7 TE3124-Printer and TE3112-Printer (Thermal Transfer)............................................................ 8 Cable Identification markers ................................................................................................... 8 TE3124-Printer and TE3112-Printer (Thermal Transfer)............................................................ 9 Cable Identification Continuous Tube..................................................................................... 9 TE3124-Printer and TE3112-Printer (Thermal Transfer).......................................................... 10 Labels................................................................................................................................... 10 T312M-Printer (Thermal Transfer) ........................................................................................... 11 Cable Identification markers ................................................................................................. 11 T312M-Printer (Thermal Transfer) ........................................................................................... 12 Labels................................................................................................................................... 12 T6112DS-Printer (Thermal Transfer) ....................................................................................... 13 T612M-DS-Printer (Thermal Transfer) ..................................................................................... 14 TTD03E / TTD04E / TTD05E / TTD06E PRINTERS (Thermal Transfer) ................................. 15 Labels (only) ......................................................................................................................... 15 TTP5200 / TTP5300 PRINTERS (Thermal Transfer)............................................................... 17 T408M-PRINTER (Thermal Transfer) ...................................................................................... 19 T308S / T312S-PRINTER (Thermal Transfer) ......................................................................... 20 Labels (only) ......................................................................................................................... 20 T2000CT-PRINTER (Thermal Transfer) .................................................................................. 21 LQ870 (Dot Matrix) .................................................................................................................. 22 LQ590 (Dot Matrix) .................................................................................................................. 22 Lexmark 2390 (Dot Matrix) ...................................................................................................... 23 AM6310 / AM6310D (Dot Matrix) ............................................................................................. 23 OKI-380 (Dot Matrix) ................................................................................................................ 24 Epson B-310N (Inkjet).............................................................................................................. 25 Epson Stylus Photo R285 (Inkjet) ............................................................................................ 25 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 1 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Epson Stylus Colour 1520 (Inkjet)............................................................................................ 25 BTT-02 (card printer) ............................................................................................................... 25 Ribbon ordering details ............................................................................................................ 26 Cable Identification markers (25.4MM ID core) .................................................................... 26 Cable Identification markers (12.7MM ID core) .................................................................... 26 Labels (25.4MM ID core) ...................................................................................................... 27 Labels (12.7MM ID core) ...................................................................................................... 27 BTT-02 (card printer) ............................................................................................................... 28 Trademarks .............................................................................................................................. 28 Related Documents: ................................................................................................................ 28 Introduction It is essential that the combination of Printers, Products and Ribbons or Inks are correct, to ensure the best print quality and mark permanence. Each combination of Printer, Product, Ribbon and Ink have been evaluated for Print quality and tested for mark permanence. Any deviation from the information contained in this document will invalidate any assurances of print quality and mark permanence. This document supersedes all previous documents detailing Identification printer, ribbon and product combinations. When selecting a ribbon width, it is essential that the ribbon width covers the entire area of the label, to avoid missed print and damage to the print head. Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 2 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T200 Ident Printer (Thermal Transfer) Cable Identification markers COMPATIBLE PRODUCTS CM-NMX CM-SCE-TP D-SCE D-SCE HLXNEL HS HS HS HTCM-SCE-TP HT-SCE HT-SCE (Black) HX-SCE MultiMark RPS NBC-SCE TMS-SCE (2X) TMS-SCE (Black) TMS-90-SCE STANDARD RIBBON 1330-3300-10 1966-RIBBON TMS-RJS-RIBBON-4DSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) 1966-RIBBON TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less) TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4HT T300-RIBBON-WH-4HT 1966-RIBBON TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4RPSCE T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG (Silver) 1966-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 3 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T200 Ident Printer (Thermal Transfer) Cable Identification Continuous Tube COMPATIBLE PRODUCTS D-SCE-FLAT-SP Sizes 38.1 and above D-SCE-FLAT-SP Sizes 25.0 and below E4 E4 HXCT Sizes 25.4 and below HXCT Sizes 25.4 and above TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7 TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4 TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above WM-SCE STANDARD RIBBON 1966-RIBBON LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less) TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) LBF-2000P-RIBBON-1966-MED 1966-RIBBON 2000P-RIBBON-4TT-NAR 2000P-RIBBON-4TT-MED TMS-RJS-RIBBON-4RPSCE LBF-2000P-RIBBON-1966-MED Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 4 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T200 Ident Printer (Thermal Transfer) Labels COMPATIBLE PRODUCTS Decals (TTP) Destructible Polyethylene (TN) EET...P-8A EET...P-9 EET...P-4 EET...V-9 SET...PSL HPK IKT...PV-4 IKT...PY-9 IMT...PV-4 IMT...PY-9 EET...PY-9 EET...V-8A EET...G-4 EET...V-4-W EET-SL...V-4-W EET...K-9 PPT...DF-4 PPT...DF-9 KTT Kapton(R) polyimide (T1K/T2K ) Nylon cloth (NC) Paper (EP) Polyesters (WP/MP/CP/HW/HM/MV/HMM) SB Plus SP Tedlar(R) polyvinyl fluoride (TTVF/PVF) WV WPM STANDARD RIBBON 1330-0607-10 1330-0607-10 For labels with liner width of 60mm or smaller: TTB-060SC/300 For labels with liner width of 76mm to 60mm: TTB-076SC/300 For labels with liner width of 84mm to 76mm: TTB-084SC/300 For labels with liner width of 110mm to 84mm: TTB-110SC/300 1330-0607-10 For labels with liner width of 60mm or smaller: TTB-060SC/450AQ529 For labels with liner width of 90mm to 60mm: TTB-090SC/360-AQ529 For labels with liner width of 110mm to 90mm: TTB-110SC/300AQ529 1330-0619-10 1330-0607-10 1330-0600-10 1330-0607-10 TMS-RJS-RIBBON-4RPSCE 1330-0607-10 1330-3300-10 1330-0607-10 1330-0607-10 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 5 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T208M Printer and T212M-Printer (Thermal Transfer) Cable Identification markers COMPATIBLE PRODUCTS D-SCE HLXNEL* HPK HT-SCE HT-SCE (Black) HX-SCE* NBC-SCE RPS TMS-SCE (2X) TMS-SCE (Black) TMS-90-SCE* STANDARD RIBBON TMS-101-RIBBON-4DSCE T200-RIBBON-1966 1330-0607-T200 TMS-101-RIBBON-4HT T200-RIBBON-WH-4HT T200-RIBBON-1966 TMS-RJS-RIBBON-4HT TMS-101-RIBBON-4RPSCE TMS-101-RIBBON-4RPSCE T200-RIBBON-WH (white) or TMS-101-RIBBON-4AG (silver) T200-RIBBON-1966 Labels COMPATIBLE PRODUCTS STANDARD RIBBON Decals (TTP) Destructible Polyethylene (TN) EP Paper Labels Kapton(R) polyimide (T1K/T2K/TSK/T2Y) Nylon Cloth (NC) Polyesters (WP/MP/HW/HM/MV/HMM) Self Lams (SBP) Self Lams (PVF) Self Lams (SP) Tedlar(R) polyvinyl fluoride (TTVF/PVF) White Vinyl (WV) 1330-0607-T200 1330-0607-T200 1330-0600-T200 1330-0619-T200 1330-0607-T200 1330-0607-T200 TMS-101-RIBBON-4RPSCE 1330-3300-101TT 1330-0607-T200 1330-3300-101TT 1330-0607-T200 * HX-SCE, HLXNEL & TMS-90-SCE for T212M only Note: T208M-Printer being superseded by T200-Label printer Note: T212M-Printer is being superseded by the T200-Ident-Printer Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 6 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T200- Label Printer (Thermal Transfer) COMPATIBLE PRODUCTS Decals (TTP) Destructible Polyethylene (TN) EET (P-8A, P-9, P-4) EET (PY-9) EET (G-4) EET (V-8A, V-4-W, SL...V-4-W) EET (V-9) EET (K-9) HPK Kapton (T1K/T2K) KTT Nylon Cloth (NC) Paper (EP) Polyesters (WP/MP/HW/HM/MV/HMM) PPT Self Lams (SBP) Self Lams (PVF) Self Lams (SP) SOLAR LABELS Tedlar (TTVF/PVF) White Vinyl (WV) STANDARD RIBBON 1330-0607-T200 1330-0607-T200 1330-TTB-T200 1330-TTB-T200 1330-TTB-T200 1330-TTB-T200 1330-TTB-T200 1330-TTB-T200 1330-0607-T200 1330-0619-T200 1330-TTB-T200 1330-0607-T200 1330-0600-T200 1330-0607-T200 1330-TTB-T200 TMS-101-RIBBON-4RPSCE 1330-3300-101TT 1330-0607-T200 1330-0607-T200 1330-3300-101TT 1330-0607-T200 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 7 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX TE3124-Printer and TE3112-Printer (Thermal Transfer) Cable Identification markers COMPATIBLE PRODUCTS CM-NMX (TE3112 only) CM-SCE-TP D-SCE D-SCE HL HLX HLX MultiMark HTCM-SCE-TP HT-SCE HT-SCE (Black) HS/HC HS/HC HS/HC HX HX-SCE NBC-SCE NCM-SCE-TP NHT-SCE RPS TMS-SCE (2X) TMS-SCE (Black) TMS-90-SCE UV-SCE STANDARD RIBBON 1330-3300-10 1966-RIBBON TMS-RJS-RIBBON-4DSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) TMS-RJS-RIBBON-4RPSCE 1966-RIBBON LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less) TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4HT T300-RIBBON-WH-4HT TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less) 1966-RIBBON 1966-RIBBON TMS-RJS-RIBBON-4HT 1966-RIBBON TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4RPSCE T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG (Silver) 1966-RIBBON T300-UV-SCE-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 8 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX TE3124-Printer and TE3112-Printer (Thermal Transfer) Cable Identification Continuous Tube COMPATIBLE PRODUCTS (Continued) D-SCE-SP D-SCE-FLAT-SP Sizes 25.0 and below D-SCE-FLAT-SP Sizes 38.1 and above HXCT Sizes 25.4 and below E4 E4 HXCT Sizes 25.4 and above TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7 TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4 TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above WM-SCE STANDARD RIBBON (Continued) TMS-RJS-RIBBON-4DSCE LBF-2000P-RIBBON-1966-MED 1966-RIBBON LBF-2000P-RIBBON-1966-MED TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) 1966-RIBBON 2000P-RIBBON-4TT-NAR 2000P-RIBBON-4TT-MED TMS-RJS-RIBBON-4RPSCE LBF-2000P-RIBBON-1966-MED Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 9 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX TE3124-Printer and TE3112-Printer (Thermal Transfer) Labels COMPATIBLE PRODUCTS Decals (TTP) Destructible Polyethylene (TN) EET...P-8A EET...P-9 EET...P-4 EET...V-9 SET...PSL IKT...PV-4 IKT...PY-9 IMT...PV-4 IMT...PY-9 EET...G-4 EET...PY-9 EET...V-8A EET...V-4-W EET-SL...V-4-W EET...K-9 PPT...DF-4, DF-9 KTT HPK Kapton(R) polyimide (T1K/T2K/TSK/T2Y) KMT Nylon Cloth (NC) Paper (EP) Polyesters (WP/MP/CP/HW/HM/MV/HMM) Self Lams (SBP) Self Lams (PVF) Self Lams (SP) SOLAR LABELS TP Tape Tedlar(R) polyvinyl fluoride (TTVF/PVF) White Vinyl (WV) STANDARD RIBBON 1330-0607-10 1330-0607-10 For labels with liner width of 60mm or smaller: TTB-060SC/300 For labels with liner width of 76mm to 60mm: TTB-076SC/300 For labels with liner width of 84mm to 76mm: TTB-084SC/300 For labels with liner width of 110mm to 84mm: TTB-110SC/300 For labels with liner width of 60mm or smaller : TTB-060SC/450AQ529 For labels with liner width of 90mm to 60mm: TTB-090SC/360-AQ529 For labels with liner width of 110mm to 90mm: TTB-114SC/360AQ529 1330-0607-10 1330-0619-10 TTB-110SC/300WH 1330-0607-10 1330-0600-10 1330-0607-10 TMS-RJS-RIBBON-4RPSCE 1330-3300-10 1330-0607-10 1330-0607-10 1330-0607-10 1330-3300-10 1330-0607-10 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 10 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T312M-Printer (Thermal Transfer) Cable Identification markers COMPATIBLE PRODUCTS CM-SCE-TP D-SCE D-SCE HL HLX HS/HC HS/HC HTCM-SCE-TP HT-SCE HT-SCE (Black) HX HX-SCE NBC-SCE NCM-SCE-TP NHT-SCE RPS TMS-SCE (2X) TMS-SCE (Black) TMS-90-SCE UV-SCE STANDARD RIBBON 1966-RIBBON TMS-RJS-RIBBON-4DSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4HT T300-RIBBON-WH-4HT (white) 1966-RIBBON 1966-RIBBON TMS-RJS-RIBBON-4HT 1966-RIBBON TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4RPSCE T300-RIBBON-WH (white) or TMS-RJS-RIBBON-4AG (silver) 1966-RIBBON T300-UV-SCE-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 11 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T312M-Printer (Thermal Transfer) Labels COMPATIBLE PRODUCTS STANDARD RIBBON Decals (TTP) Destructible Polyethylene (TN) HPK Kapton(R) polyimide (T1K/T2K/TSK/T2Y) Nylon Cloth (NC) Paper (EP) Polyesters (WP/MP/CP/HW/HM/MV/HMM) Self Lams (SBP) Self Lams (PVF) Self Lams (SP) Tedlar(R) polyvinyl fluoride (TTVF/PVF) TP Tape White Vinyl (WV) 1330-0607-10 1330-0607-10 1330-0607-10 1330-0619-10 1330-0607-10 1330-0600-10 1330-0607-10 TMS-RJS-RIBBON-4RPSCE 1330-3300-10 1330-0607-10 1330-3300-10 1330-0607-10 1330-0607-10 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 12 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T6112DS-Printer (Thermal Transfer) COMPATIBLE PRODUCTS D-SCE D-SCE D-SCE-SP D-SCE-SP D-SCE-SP D-SCE-FLAT-SP Sizes 38.1 and above D-SCE-FLAT-SP Sizes 25.0 and below E4 E4 HT-SCE HXCT Sizes 25.4 and below HXCT, sizes 38.1 and above HX-SCE NBC-SCE NHT-SCE RPS TMS-SCE (2X) TMS-90-SCE TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7 TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4 TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above STANDARD RIBBON TMS-RJS-RIBBON-4DSCE(For Optimal performance) 1966-RIBBON (For Superior performance) TMS-RJS-RIBBON-4DSCE (For Optimal performance) 1966-RIBBON (For Superior performance) LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less). 1966-RIBBON LBF-2000P-RIBBON-1966-MED TMS-RJS-RIBBON-4RPSCE (For Optimal performance) 1966-RIBBON ( For Superior performance) TMS-RJS-RIBBON-4HT LBF-2000P-RIBBON-1966-MED 1966-RIBBON 1966-RIBBON TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4HT TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4RPSCE 1966-RIBBON 2000P-RIBBON-4TT-NAR 2000P-RIBBON-4TT-MED TMS-RJS-RIBBON-4RPSCE Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 13 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T612M-DS-Printer (Thermal Transfer) COMPATIBLE PRODUCTS D-SCE D-SCE HT-SCE HX-SCE NBC-SCE RPS-SCE TMS-SCE TMS-SCE-2X STANDARD RIBBON TMS-RJS-4RPSCE-RIBBON(For Optimal performance) 1966-RIBBON (For Superior performance) TMS-RJS-RIBBON-4HT 1966-RIBBON TMS-RJS-RIBBON-4HT TMS-RJS-4RPSCE-RIBBON TMS-RJS-4RPSCE-RIBBON TMS-RJS-4RPSCE-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 14 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX TTD03E / TTD04E / TTD05E / TTD06E PRINTERS (Thermal Transfer) Labels (only) COMPATIBLE PRODUCTS STANDARD RIBBON IKT...PV-4 IKT...PY-9 For labels with liner width of 60mm to 40mm: IMT...PV-4 IMT...PY-9 EET...PY-9 EET...G-4 TTB-060SC/450AQ529S For labels with liner width of 90mm to 76mm: TTB-090SC/36-AQ529 For labels with liner width of 110mm to 90mm: EET...V-8A TTB-110SC/300AQ529S For labels with liner width of 114mm to 110mm: EET...V-4-W EET-SL...V-4-W TTB-114SC/360AQ529 For labels with liner width of 166mm to 165mm: EET...K-9 PPT...DF-4 TTB-166SC/360AQ529 When "Ink in" is required delete "S" (TTB040SC/450AQ529) PPT...DF-9 For labels with liner width of 60mm or smaller: TTB-060SC/300 For labels with liner width of 76mm to 60mm: EET...P-8A TTB-076SC/300 For labels with liner width of 84mm to 76mm: EET...P-9 TTB-084SC/300 For labels with liner width of 110mm to 84mm: EET...P-4 TTB-110SC/300 For labels with liner width of 128mm to 110mm: TTB-128SC/300 For labels with liner width of 145mm to 128mm: EET...V-9 SET...PSL TTB-145SC/300 For labels with liner width of 170mm to 145mm: TTB-170SC/300 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 15 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX COMPATIBLE PRODUCTS (Continued) STANDARD RIBBON (Continued) For labels with liner width of 76mm or smaller: PPT...DF-4 TTB-076SC/300WH For labels with liner width of 84mm to 76mm: PPT...DF-9 TTB-084SC/300WH For labels with liner width of 110mm to 84mm: KMT TTB-110SC/300WH For labels with liner width of 145mm to 110mm: EP TTB-145SC/300WH For labels with liner width of 170 to 145mm: TTB-170SC/300WH Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 16 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX TTP5200 / TTP5300 PRINTERS (Thermal Transfer) COMPATIBLE PRODUCTS STANDARD RIBBON IKT...PV-4 IKT...PY-9 For labels with liner width of 60mm to 40mm: IMT...PV-4 IMT...PY-9 TTB-060SC/450AQ529S For labels with liner width of 90mm to 76mm: EET...PY-9 EET...V-8A EET...G-4 TTB-090SC/360-AQ529 For labels with liner width of 110mm to 90mm: TTB-110SC/300AQ529S For labels with liner width of 114mm to 110mm: EET...V-4-W EET-SL...V-4-W TTB-114SC/360-AQ529 For labels with liner width of 166mm to 165mm: EET...K-9 PPT...DF-4 TTB-166SC/360AQ529S When "Ink in" is required delete "S" (TTB-040SC/450AQ529) PPT...DF-9 For labels with liner width of 60mm or smaller: TTB-060SC/300 For labels with liner width of 76mm to 60mm: EET...P-8A TTB-076SC/300 For labels with liner width of 84mm to 76mm: EET...P-9 TTB-084SC/300 For labels with liner width of 110mm to 84mm: EET...P-4 TTB-110SC/300 For labels with liner width of 128mm to 110mm: TTB-128SC/300 For labels with liner width of 145mm to 128mm: EET...V-9 TTB-145SC/300 For labels with liner width of 170mm to 145mm: TTB-170SC/300 SET...PSL Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 17 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX COMPATIBLE PRODUCTS (Continued) STANDARD RIBBON (Continued) For labels with liner width of 76mm or smaller: PPT...DF-4 TTB-076SC/300WH For labels with liner width of 84mm to 76mm: PPT...DF-9 TTB-084SC/300WH For labels with liner width of 110mm to 84mm: KMT TTB-110SC/300WH For labels with liner width of 145mm to 110mm: EP TTB-145SC/300WH For labels with liner width of 170mm to 145mm: TTB-170SC/300WH Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 18 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T408M-PRINTER (Thermal Transfer) COMPATIBLE PRODUCTS Decals (TTP) Destructible Polyethylene (TN) STANDARD RIBBON 1330-0607-10 D-SCE 1330-0607-10 TMS-RJS-RIBBON-4DSCE (For Optimal performance) D-SCE 1966-RIBBON ( For Superior performance) HL TMS-RJS-RIBBON-4RPSCE HLX 1910-RIBBON-4T300 HPK 1330-0607-10 HT-SCE HT-SCE (Black) Kapton(R) polyimide (T1K/T2K/TSK/T2Y) KTT NBC-SCE Nylon Cloth (NC) Paper (EP) Polyesters (WP/MP/CP/HW/HM/MV/HMM) RPS Self-Lams (SBP) Self-Lams (PVF) Self-Lams (SP) Tedlar(R) polyvinyl fluoride (TTVF/PVF) TMS-SCE (2X) TMS-RJS-RIBBON-4HT T300-RIBBON-WH-4HT 1330-0619-10 TTB-114SC/360 TMS-RJS-RIBBON-4HT 1330-0607-10 1330-0600-10 TMS-SCE (Black) TMS-90-SCE TP Tape 1330-0607-10 TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4RPSCE 1330-3300-10 1330-0607-10 1330-3300-10 TMS-RJS-RIBBON-4RPSCE T300-RIBBON-WH (White) or TMS-RJS-RIBBON-4AG (Silver) TMS-RJS-RIBBON-4RPSCE 1330-0607-10 White Vinyl (WV) 1330-0607-10 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 19 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T308S / T312S-PRINTER (Thermal Transfer) Labels (only) COMPATIBLE PRODUCTS Decals (TTP) Destructible Polyethylene (TN) HPK Kapton(R) polyimide (T1K/T2K/TSK/T2Y) KTT Nylon Cloth (NC) Paper (EP) Self-Lams (SBP) Self-Lams (PVF) Self-Lams (SP) Polyesters (WP/MP/CP/HW/HM/MV/HMM) Tedlar(R) polyvinyl fluoride (TTVF/PVF) TP Tape White Vinyl (WV) STANDARD RIBBON 1330-0607-10 1330-0607-10 1330-0607-10 1330-0619-10 TTB-114SC/360-AQ529 1330-0607-10 1330-0600-10 TMS-RJS-RIBBON-4RPSCE 1330-3300-10 1330-0607-10 1330-0607-10 1330-3300-10 1330-0607-10 1330-0607-10 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 20 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX T2000CT-PRINTER (Thermal Transfer) COMPATIBLE PRODUCTS D-SCE-FLAT-SP Sizes 38.1 and above D-SCE-FLAT-SP Sizes 25.0 and below TTMS, TTMS-2X & TTMS-MP sizes 2.4 to 12.7 TTMS, TTMS-2X & TTMS-MP sizes 19.0 and 25.4 TTMS, TTMS-2X & TTMS-MP sizes 38.1 and above HXCT Sizes 25.4 and below HXCT Sizes 25.4 and above STANDARD RIBBON 1966-RIBBON LBF-2000P-RIBBON-1966-MED 2000P-RIBBON-4TT-NAR 2000P-RIBBON-4TT-MED TMS-RJS-RIBBON-4RPSCE LBF-2000P-RIBBON-1966-MED 1966-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 21 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX LQ870 (Dot Matrix) COMPATIBLE MATERIALS TMS-SCE (2X) RPS D-SCE CM-SCE NCM-SCE Nomex (NMX) Raymark (RMK6) Tedlar (DMVF) Self Lams (TW/PV) Kapton (K) Vinyl Cloth (C) Polyesters (E/M) STANDARD RIBBON TMS-SYSTEM-SIX-RIBBON-A TMS-SYSTEM-SIX-RIBBON-A TMS-SYSTEM-SIX-RIBBON-A TMS-SYSTEM-SIX-RIBBON-A TMS-SYSTEM-SIX-RIBBON-A 1330-0037-00 TMS-SYSTEM-SIX-RIBBON-A 1330-0037-00 1330-0037-00 1330-0037-00 1300-0037-00 1330-0037-00 LQ590 (Dot Matrix) COMPATIBLE MATERIALS TMS-SCE (2X) RPS D-SCE CM-SCE NCM-SCE Raymark (RMK6) STANDARD RIBBON TMS-LQ590-RIBBON TMS-LQ590-RIBBON TMS-LQ590-RIBBON TMS-LQ590-RIBBON TMS-LQ590-RIBBON TMS-LQ590-RIBBON Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 22 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Lexmark 2390 (Dot Matrix) COMPATIBLE MATERIALS TMS-SCE (2X) RPS D-SCE CM-SCE NCM-SCE Raymark (RMK6) STANDARD RIBBON TMS-SYSTEM-SIX-RIBBON-B TMS-SYSTEM-SIX-RIBBON-B TMS-SYSTEM-SIX-RIBBON-B TMS-SYSTEM-SIX-RIBBON-B TMS-SYSTEM-SIX-RIBBON-B TMS-SYSTEM-SIX-RIBBON-B AM6310 / AM6310D (Dot Matrix) COMPATIBLE MATERIALS STANDARD RIBBON TMS-SCE (2X) RPS D-SCE CM-SCE HPC Raymark (RMK6) HL HS/HC MultiMark (HM) Nomex (NMX) Tedlar (DMVF) Self Lams (TW/PV) HPC 1892BK04-RIBBON 1892BK01 Kapton (K) Vinyl Cloth (CW) Polyesters (E/M) HX HX-SCE HLX 1892BK03 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 23 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX OKI-380 (Dot Matrix) COMPATIBLE MATERIALS HL HS HX MultiMark (HM) STANDARD RIBBON 18910000 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 24 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Epson B-310N (Inkjet) COMPATIBLE MATERIAL STANDARD INK DURA BRITE ULTRA (Epson ink) Raymark A4 sheets (Recommended for enhanced humidity resistance) Epson Stylus Photo R285 (Inkjet) PRINTER STANDARD INK Claria Photographic ink (Epson ink) Raymark A4 sheets Epson Stylus Colour 1520 (Inkjet) PRINTER Raymark 1 Raymark A4 Sheets STANDARD INK Chess (Black). Abacus (Cyan, Magenta, Yellow). Epson ink Chess (Black). Abacus (Cyan, Magenta, Yellow). Epson ink BTT-02 (card printer) COMPATIBLE MATERIALS STANDARD RIBBON BGS BGF BBB-060SC/200 (black). BET BBB-060WE/200 (white). BTS BBB-060BL/200 (blue). BBK BBB-060RT/200 (red). BBL BBS BKB Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 25 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Ribbon ordering details Cable Identification markers (25.4MM ID core) DESCRIPTION TE PART NUMBER 1330-3300-10 1966-RIBBON LBF-2000P-RIBBON-1966-MED (For print width of 60mm or less) 2000P-RIBBON-4TT-MED 980892-000 F55931-000 6-1768383-4 893803-000 277493-000 311292-000 557721-000 754073-000 154739-000 650784-000 124503-000 742412-000 EC8932-000 2000P-RIBBON-4TT-NAR TMS-RJS-RIBBON-4DSCE TMS-RJS-RIBBON-4RPSCE TMS-RJS-RIBBON-4HT T300-RIBBON-WH-4HT T300-RIBBON-WH (White) TMS-RJS-RIBBON-4AG (Silver) 1330-0607-10 T300-UV-SCE-RIBBON Cable Identification markers (12.7MM ID core) DESCRIPTION TE PART NUMBER TMS-101-RIBBON-4DSCE T200-RIBBON-1966 1330-0607-T200 TMS-101-RIBBON-4HT 505478-000 D60849-000 E45478-000 746617-000 086961-000 310109-000 117366-000 252557-000 T200-RIBBON-WH-4HT TMS-101-RIBBON-4RPSCE T200-RIBBON-WH TMS-101-RIBBON-4AG Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 26 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX Labels (25.4MM ID core) DESCRIPTION TE PART NUMBER 1330-0607-10 742412-000 2-1768049-6 3-1768049-0 C75514-000 3-1768049-6 2-1768049-7 3-1768049-4 3-1768049-7 952888-000 3-1768049-8 143060-000 557721-000 980892-000 TTB-060SC/300 TTB-076SC/300 TTB-084SC/300 TTB-110SC/300 TTB-060SC/450AQ529 TTB-090SC/360-AQ529 TTB-110SC/300AQ529 1330-0619-10 TTB-110SC/300WH 1330-0600-10 TMS-RJS-RIBBON-4RPSCE 1330-3300-10 Labels (12.7MM ID core) DESCRIPTION TE PART NUMBER 1330-0607-T200 1330-0619-T200 TMS-101-RIBBON-4RPSCE 1330-3300-101TT E45478-000 C49013-000 310109-000 C95590-000 1-1768384-8 C36369-000 1330-TTB-T200 1330-0600-T200 Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 27 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled Doc. No: 411-121005 Issue: 11 Date: February 2013 IDENTIFICATION PRINTER PRODUCT RIBBON MATRIX BTT-02 (card printer) DESCRIPTION TE PART NUMBER BBB-060SC/200 (black). 1-1768016-4 1-1768016-5 1-1768016-1 1-1768016-3 BBB-060WE/200 (white). BBB-060BL/200 (blue). BBB-060RT/200 (red). Trademarks TMS, TE Connectivity (TE) logo and Tyco Electronics are trademarks of the Tyco Electronics group of companies and its licensors. Other products, logos, and Company names mentioned herein may be trademarks of their respective owners. Kapton and Tedlar are trademarks of E I du Pont de Nemours & Company for polymide films. Related Documents: 404-121000 WinTotal Ribbon List Author: I. Ridgeway Print date: 1-Mar-13 Issue date: February 2013: Page: 28 of 28 While TE Connectivity has made every reasonable effort to ensure the accuracy of the information in this document, TE does not guarantee that it is error-free, nor does TE make any other representation, warranty or guarantee that the information is accurate, correct, reliable or current. TE reserves the right to make any adjustments to the information contained herein at any time without notice. TE expressly disclaims all implied warranties regarding the information contained herein, including, but not limited to, any implied warranties of merchantability or fitness for a particular purpose. The dimensions in this document are for reference purposes only and are subject to change without notice. Specifications are subject to change without notice. Consult TE for the latest dimensions and design specifications. If this document is printed it becomes uncontrolled