3412N/12HH - EBM PAPST - Datasheet.Live

General Purpose Relays

Industrial Relays

KUEP Series Panel Plug-in Relay

12-2016, Rev. 1216

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Coil Data

Coil voltage range 5 to 125VDC

6 to 240VAC

Coil insulation system according UL Class B

Coil versions, DC coil

Coil Rated Operate Coil Rated coil

code voltage voltage resistance power

VDC VDC Ω±10% W

One pole versions

5 5 3.75 21 1.2

6 6 4.5 32 1.125

12 12 9.0 120 1.2

24 24 18.0 472 1.25

48 48 36.0 1800 1.3

110 110 82.5 10000 1.25

125 125 93.75 13000 1.2

Two pole versions

5 5 3.75 14 1.8

6 6 4.5 20 1.8

12 12 9.0 80 1.8

24 24 18.0 320 1.8

48 48 36.0 1250 1.85

110 110 82.5 6720 1.8

125 125 93.75 8680 1.8

All ﬁgures are given for coil without preenergization, at ambient temperature +23°C.

Coil versions, AC coil

Coil Rated Operate Coil Rated coil

code voltage voltage resistance power

VAC VAC Ω±15% VA

One pole versions

6 6 5.1 6 2.0

12 12 10.2 24 2.0

24 24 20.4 85 2.0

120 120 102.0 2250 2.1

240 240 204.0 9110 2.1

Two pole versions

6 6 5.1 4.2 2.8

12 12 10.2 18 2.8

24 24 20.4 72 2.8

120 120 102.0 1700 2.9

240 240 204.0 7200 2.9

All ﬁgures are given for coil without preenergization, at ambient temperature +23°C.

Insulation Data

Initial dielectric strength

between open contacts 1200Vrms

between contact and coil 2200Vrms

between adjacent contacts 2200Vrms

Initial insulation resistance

between insulated elements 100MΩ

n 1 Form X, 2 Form A and 2 Form C contact arrangements

n 10 amp current rating

n Magnetic blow-out

n Various mounting options

n Indicator lamp available

Typical applications

DC load switching in industrial controls

Approvals

UL E22575; CSA LR15734; CE (KUEP-11 only)

Technical data of approved types on request

Contact Data

Contact arrangement

1 form X (NO-DM), 2 form A (NO), 2 form C (CO)

Rated voltage 150VDC

Rated current 10A

Contact material AgCdO AgSnOInO

Min. recommended contact load 300mA, 12VDC

Frequency of operation 360 ops./hour 360 ops./hour

Operate/releases time max. 15/10ms

Bounce time max. 17ms

Contact ratings

Type Load Cycles

UL 508

KUEP, 1 form X, AgCdO

10A, 150VDC 100x103

1A, 300VDC 100x103

2.5 A, 170 VDC, resistive 100x103

KUEP, 2 form A, AgCdO

5 A, 150 VDC

2.5 A, 170 VDC, resistive 100x103

KUEP, 2 form C, AgCdO

3 A, 150 VDC

2.5 A, 170 VDC, resistive 100x103

10 A, 240 VAC

10 A, 32 VDC

5 FLA, 15 LRA, 250 VAC

1/3 HP, 120 VAC

5 A, 120 VAC, tungsten

1/2 HP, 250 VAC

10 FLA, 40 LRA, 125 VAC

3 A, 600 VAC

1/2 HP, 480 VAC

1/2 HP, 600 VAC

1 HP, 480 VAC, 3 phase

KUEP, 1 form X, AgSnOInO

10A, 150VDC, resistive 30x103

KUEP, 2 form A, AgSnOInO

5 A, 150 VDC, resistive 100x103

KUEP, 2 form C, AgSnOInO

3 A, 150 VDC, resistive 100x103

Mechanical endurance 10x106 ops.

General Purpose Relays

Industrial Relays

KUEP Series Panel Plug-in Relay (Continued)

12-2016, Rev. 1216

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Other Data (Continued)

Weight 85g

Packaging/unit tray/25 pcs., box/150pcs.

Accessories

For details see datasheet Sockets and Accessories, KUP Relays

Product Code Description

27E893 DIN socket (use 20C318 clip)

27E121 Track mount socket (use 20C314 clips)

27E043 Chassis mount/solder eyelet socket (use 20C254 clip)

27E046 Chassis mount/PCB socket (use 20C254 clip)

27E067 Chassis mount/quick connect socket (use 20C254 clip)

27E396 Snap-in/quick connect socket (use 20C254 clip)

Other Data

Material compliance: EU RoHS/ELV, China RoHS, REACH, Halogen content

refer to the Product Compliance Support Center at

www.te.com/customersupport/rohssupportcenter

Ambient temperature

DC coil -45ºC to 70ºC

AC coil 1 pole: -45ºC to 55ºC

2 pole: -45ºC to 45ºC

Category of environmental protection

IEC 61810 RTI - dust protected

Vibration resistance (functional) .065” double amplitude, 10-55Hz

Shock resistance (functional) 15g, 11ms (non-operating)

Terminal type Quick connects (QC), .187 or .205

PCB-THT

Terminal retention, push force

QC .205 17 lbs for 3s

QC .187 25 lbs for 3s

Dimensions

Plain case Bracket mount case

906 MAX.

(48.41)

1. 531 MAX.

(38.89)

1 2 3

4 5 6

7 8 9

1.406 MAX.

(35.71)

1 2 3

4 5 6

7 8 9

1.518 MAX.

(38.56)

1.373 ± .010

(34.87 ± .25)

1.713 ± .0 03

(43.51 ± .08)

1.989 ± .003

(50.52)

.178 TYP.

(4.52)

2.248 MAX.

(57.10)

.078 TYP.

(1.98)

1.906 MAX.

(48.41)

.75

(19.1)

2.90 MAX.

(73.7)

.078 R.

TYP.

(1.98)

1.531 MAX.

(38.89)

.312

TYP.

(7.92)

.375

(9.53)

.437

(11.10)

2.500

(63.50)

.625 TYP.

(15.88)

.06

(1.52)

1.406 MAX.

(35.71)

.07

(1.8)

Terminal dimensions

4.75mm (.187) quick connect 5.21mm (.205) quick connect 1.19mm (.047) printed circuit

.205± .0

(5.21± .05)

.156

(3.96)

.093

(2.36)

.285

(7.24)

.316 REF.

(8.03) .032

(.81)

THICKNESS

HEADER

.035

(.89)

.156

(3.96)

.032

(.81)

THICKNESS

.093

(2.36)

HEADER

.237

(6.02)

.268 REF.

(6.81)

.047

(1.19)

.180

(4.57)

.156

(3.96)

X Is For Terminal Dimensions.

See Teminal Drawings.

Top ﬂange case Core / stud mount case

1.906 MAX.

(48.41)

1.43 MAX.

(36.27)

.437 .010

(11.10 .25)

.130

(3.30) 1. 74 MAX.

(44.2)

.312

(7.92)

STUD with

#6-32

THREAD

or CORE

TAPPED

#6-32

1.29 (32.8) MAX. W/ .205 (5.21) QC

1.25 (31.8) MAX. W/ .187 (4.75) QC

.125

(3.18)

.078

(1.98)

.187±.002

(4.75±.05)

.250

(6.35)

281 REF.

(7.14)

THICKNESS

.020

(.51)

HEADER

General Purpose Relays

Industrial Relays

KUEP Series Panel Plug-in Relay (Continued)

12-2016, Rev. 1216

www.te.com

a TE Connectivity Ltd. company

Datasheets and product speciﬁcation

according to IEC 61810-1 and to be used

only together with the ‘Deﬁnitions’ section.

Datasheets and product data is subject to the

terms of the disclaimer and all chapters of

the ‘Deﬁnitions’ section, available at

http://relays.te.com/definitions

Datasheets, product data, ‘Deﬁnitions’ sec-

tion, application notes and all speciﬁcations

are subject to change.

Potter & Brumﬁeld

Terminal assignment

1 Form X 2 Form A 2 Form C

Product code structure Typical product code KUEP -3 A 1 5 -120

Type

KUEP Enclosed relay with magnetic blow-outs

Contact arrangement and rating

3 1 form X (1 NO-DM) 7 2 form A (2 NO)

11 2 form C (2 CO)

Coil Input

A AC, 50/60Hz D DC

Mounting and options

1 Socket mount (plain) case 3 Socket mount (plain) case, with indicator lamp 1)

5 Bracket mount case A Plain case with #6-32 stud and locating tab

E Plain case with #6-32 tapped core and locating tab T Top ﬂange case

1) Indicator lamps are available on models with the following coils: 6-24VAC and VDC, 110VDC and 120-240VAC.

Only models with 120-240VAC coils are UL recognized.

Terminal and contact material

5 4.75mm (.187in) quick connect/solder; AgCdO 6 5.21mm (.205in) quick connect/solder; AgCdO

7 1.19mm (.047in) PCB, AgCdO P 4.75mm (.187in) quick connect/solder; AgSnOInO

R 5.21mm (.205in) quick connect/solder; AgSnOInO S 1.19mm (.047in) PCB, AgSnOInO

Coil voltage

Coil code: please refer to coil versions table

Product Code Arrangement Material Coil Terminals Mounting Part Number

KUEP-3A15-120 1 Form X, 1 NO-DM AgCdO 120 VAC 4.75mm (.187in) QC Socket mount, plain case 9-1393113-4

KUEP-3D15-12 12 VDC 9-1393113-8

KUEP-3D15-24 24 VDC 1393114-1

KUEP-3D15-48 48 VDC 1393114-2

KUEP-3D15-110 110 VDC 9-1393113-7

KUEP-3D35-24 24 VDC Socket mount, plain case w/ indicator lamp 1393114-5

KUEP-7D15-24 2 Form A, 2 NO Socket mount, plain case 1-1393114-1

KUEP-11A15-120 2 Form C, 2 CO 120 VAC 8-1393113-3

KUEP-11D15-12 12 VDC 8-1393113-6

KUEP-11D15-24 24 VDC 8-1393113-7

KUEP-11D15-48 48 VDC 8-1393113-8

KUEP-11D15-110 110 VDC 8-1393113-5

AB AB

–+

–

–++

––

Load polarity noted above is recommended for optimum arc suppression.

PCB layout

Bottom view on solder pins

1 form X version 2 form C version shown

(Omit unnecessary holes for

form A types)

.875

(22.23)

.626

5.90)

.076 DIA. TYP.

(1.93)

.626

(15.90)

.328

(8.33)

.875

(22.23)

.076 DIA. TYP.

(1.93)

.206

(5.23)