Preliminary DATA SHEET 1310 NM FABRY-PEROT (FP) LASER DIODE PIGTAILED PACKAGE FP-1310-5I-XXX FEATURES: Wide operating temperature (-40C to 85C) Stable threshold current for easy transmitter control (T0 ~ 80K) 1310 nm typical emission wavelength FP-LDs Pigtailed package High-speed modulation capability (Up to 5Gb/s) The FP-1310-5I-xxx is an MOCVD grown InAlGaAs ridge laser diode with emission wave-length of 1310 nm and standard continuous light output of 5 mW per facet. These lasers provide stable, single transverse mode oscillation. These are hermetically sealed devices with an integrated monitor photodiode to monitor the optical output. The TO-56 laser can is mounted inside a metal coaxial package which is then pigtailed with a singlemode fiber and terminated with a fiber connector. The pigtail comes in a choice of 50cm or 100cm lengths as standard, terminated with either FC or SC connectors with an APC or UPC polish. Suitable as a light source for data-com and telecom applications with data rates up to 5 Gb/s. Excellent reliability Ultra-low gradual wear-out rates <1% failures in 20 yrs at 55C APPLICATION Source for high-speed data-communication and telecommunication links Part Number FP-1310-5I-50SMF-FCUPC SONET, Fiber-channel, Giag-bit Ethernet, FTTX FP-1310-5I-50SMF-FCAPC CATV / Satellite and other analogue markets FP-1310-5I-100SMF-SCUPC FP-1310-5I-100SMF-SCAPC Description 1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode pigtailed package, FC UPC connector. 1310 nm Fabry-Perot (FP) Laser Diode, 50cm singlemode pigtailed package, FC APC connector. 1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode pigtailed package, SC UPC connector. 1310 nm Fabry-Perot (FP) Laser Diode, 100cm singlemode pigtailed package, SC APC connector. . Other fiber lengths and connector options available on request. FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE ABSOLUTE MAXIMUM RATINGS Symbol Parameter PO Output power Conditions Rating Unit CW 10 mW VRLD Reverse voltage (laser diode) - 2 V VRPD Reverse voltage (monitor photodiode) - 10 V IFPD Forward current (photodiode) - 1 mA Operation temperature - -40 to +85 C Storage temperature - -40 to +100 C ESD exposure level (human body model) - 200 V Tc Tstg - NOTICE: Stresses greater than those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operations section for extended periods of time may affect reliability. NOTICE: The inherent design of this component causes it to be sensitive to electrostatic discharge (ESD). To prevent ESD-induced damage and/or degradation to equipment, take normal ESD precautions when handling this product FP-1310-5I-XXX ELECTRICAL-OPTICAL CHARACTERISTICS Unless otherwise stated, all parameters are at TCASE = 25C and referenced to pigtail power. Symbol Parameter Test Conditions Poc Output power - pigtail end CW, IF = 32mA Ith Threshold current CW IthH Threshold current at 85C CW, Tc=85C T0 Temperature dependence of threshold current Iop Operating current For PO = 2mW (CW) Vop Operating voltage CW Voltage at Iop Rop Differential series resistance (laser diode) CW dV/dI at T = 25C between 15 mA and 25 mA SE Slope efficiency (fiber coupled) SER SE Ratio Minimum Typical 2.5 3 Slope efficiency temperature coefficient c Lasing wavelength Spectral width under modulation dc/dT Temperature dependence of lasing wavelength tr Rise time mW 15 mA 21 30 mA - 80 - K - 32 4 mA 1.15 1.4 V 7 12 0.1 SE @ 85C / SE @ 25C PRBS 2^7-1 ER =10 dB; Ib = 1.8*Ith; RMS (sigma) 20% - 80% ; Tc = 85C; Unit 9 0.6 W/A 0.8 SE @ 40C / SE @ 25C SE/T Maximum 1.4 -0.35 -0.65 %/C 1290 1310 1330 nm - 1.5 2.75 nm 0.40 0.45 0.55 nm/K - - 140 ps - - 140 ps -125 dB/Hz ER = 10 dB; Ib = 1.8*Ith tf Fall time 20% - 80% ; Tc = 85C; ER =10 dB; Ib = 1.8*Ith RIN Relative Intensity Noise TOIP Third order intercept point fR Relaxation oscillation frequency Cd Capacitance for monitor photodiode Imon Monitor photodiode current TRACK Im0 CW, 0.95 to 5.45GHz, -20dBm back reflection in worst case polarization PO=2mW, F=5.45 to 5.452GHz, 85C Tc = 85C; I = Ith+36 mA 15 dB 5 5.5 - GHz - 5 50 pF 30 130 1000 A Tracking error -1.5 - +1.5 dB Dark current for Monitor photodiode - - 0.1 A Iop = 32mA FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE TYPICAL CHARACTERISTICS 85oC, 60mA SS=41 85oC, 60mA SS=41 Typical IV curve at Tc = 25oC, 45oC, 65oC and 85oC Typical LI curve at Tc = 25oC, 45oC, 65oC and 85oC 2.0 1.6 1.2 0.8 0.4 0 10 20 30 40 50 FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE TYPICAL CHARACTERISTICS FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE PIN OUT Number Function 1 Ground 2 LD Cathode 3 PD Anode 4 LD Anode / PD Cathode MOUNTING DIMENSIONS (for reference only): Dimensions in millimeters FP-1310-5I-XXX 1310 NM FABRY-PEROT (FP) LASER DIODE ADVANCED OPTICAL COMPONENTS AOC CAPABILITIES Finisar's ADVANCED OPTICAL COMPONENTS division was formed through strategic acquisition of key optical component suppliers. The company has led the industry in high volume Vertical Cavity Surface Emitting Laser (VCSEL) and associated detector technology since 1996. VCSELs have become the primary laser source for optical data communication, and are rapidly expanding into a wide variety of sensor applications. VCSELs' superior reliability, low drive current, high coupled power, narrow and circularly symmetric beam and versatile packaging options (including arrays) are enabling solutions not possible with other optical technologies. ADVANCED OPTICAL COMPONENTS is also a key supplier of Fabrey-Perot (FP) and Distributed Feedback (DFB) Lasers, and Optical Isolators (OI) for use in single mode fiber data and telecommunications networks ADVANCED OPTICAL COMPONENTS' advanced capabilities include: 1, 2, 4, 8, and 10Gbps serial VCSEL solutions 1, 2, 4, 8, and 10Gbps serial SW DETECTOR solutions VCSEL and detector arrays 1, 2, 4, 8, and 10Gbps FP and DFB solutions at 1310 and 1550nm 1, 2, 4, 8, and 10Gbps serial LW DETECTOR solutions Optical Isolators from 1260 to 1600nm range Laser packaging in TO46, TO56, and Optical subassemblies with SC, LC, and MU interfaces for communication networks VCSELs operating at 670nm, 780nm, 980nm, and 1310nm in development LOCATION Allen, TX - Business unit headquarters, VCSEL wafer growth, wafer fabrication and TO package assembly. Fremont, CA - Wafer growth and fabrication of 1310 to 1550nm FP and DFB lasers. Sensor packages include surface mount, various plastics, chip on board, chipscale packages, etc. Custom packaging options Shanghai, PRC - Optical passives assembly, including optical isolators and splitters. SALES AND SERVICE Finisar's ADVANCED OPTICAL COMPONENTS division serves its customers through a worldwide network of sales offices and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact a nearby sales office or call the number listed below. Phone:1-866-MY-VCSEL USA (toll free) 1-214-509-2700 USA (Direct dial) 44 (0) 174 336 5533 Europe 886-935-409898 China & Taiwan 81-90-4437-1130 Japan 82-11-220-6153 Asia Pacific & Korea Fax: 1-214-509-3709 USA Email: salesAOCD@finisar.com WEB: www.finisar.com/aoc.php (c)2007 Finisar Corporation. All rights reserved. Finisar is a registered trademark of Finisar Corporation. Features and specifications are subject to change without notice. Rev. E 03/09