LCE / 40mm The LCE Series offers the latest in LED technology. Versatile and energy-efficient. SIZE: 40mm diameter INPUT VOLTAGE - AC/DC24V OPTIONS: - AC90-250V FUNCTIONS - Continuous only AVAILABLE: - Continuous, Flashing, Alarms MOUNTING OPTIONS - Pole mount: with 300mm steel pole, SZ-012 angle bracket, 2 nuts, 2 washers - Direct mount: includes 3 mounting nuts BODY STYLE: - Pre-assembled, pre-wired - Interchangeable and stackable after purchase BODY COLOR: Beige TIERS: 1-5 modules can be stacked MODULE COLORS: Red / Amber / Green / Blue / Clear ALARMS (FB STYLE - Alarm 1: selectable, single-tone, intermittent (fast beep) ONLY): alarm, 85dB (at 1m) - Alarm 2: selectable, single tone, intermittent (slow beep) alarm, 85dB (at 1m) RATINGS: - CE - UL Component Recognition (US) - UL Component Recognition (Canada) - RoHS 1 PROTECTION: - LCE-W: IP-65 - LCE, LCE-FBW, LCE-FB: IP-54 - Type 4 / 4X / 13 (indoor, direct-mount only) CONTROL OPTIONS: - Dry contact closure such as switches or relay contacts - Open-collector transistor (NPN or PNP for DC24V, NPN for AC90-250V) - Direct voltage control for DC24V, continuous and alarm functions only (c) PATLITE U.S.A. All Rights Reserved. Mechanical Diagrams LCE (Dimensions in mm) Tower Height [H] LCE-02, LCE-02FB, LCE-02W, LCE-02FBW, LCE-M2, LCE-M2W LCE-M2FB, LCE-M2FBW 1 Light : 158 2 Lights : 193 1 Light : 213 2 Lights : 248 3 Lights : 228 4 Lights : 263 5 Lights : 298 3 Lights : 283 4 Lights : 318 5 Lights : 353 Direct Mount Pole Mount 40 Base Height [B] LCE-02, LCE-02FB, LCE02W, LCE-02FBW, LCE-M2, LCE-M2W 40 11 112 11 LCE-M2FB, LCE-M2FBW 167 35 H Wire Size Chart 35 H 24V: Signal Wires AWG22 24V: Power Wires AWG22 90-250V: Signal Wires AWG22 90-250V: Power Wires AWG18 90-250V: Ground Wire AWG18 B B Closed cap nut (3-M3) (LCE pole-mount only) 27 12 17.3 253 13 3 - M3 Min. 1250 Max. mounting panel thickness: 10 Side-mount bracket not shown (see below) Min. 950 Side-mount Bracket Mounting Dimensions Name plate (Supplied) 217.3 Wire Entry Hole: 13 Mounting Hole 3- 4 4.2 Ground Hole 11 19 32 5 120O (Side-mount bracket Installed) 120O M17 x P1.5 40 30 44.5 30 Direction of Audible Alarm 27 57 220 9 3 Specifications LCE Options Rated Voltage Operating Voltage Input Voltage Operating temperature Range Relative Humidity Flashing Cycle ("FB" styles only) Alarm Sound Level ("FB" styles only) Alarm Sound Description ("FB" styles only) Mounting Location Options Mounting Direction Options Protection Rating (LCE-W) Protection Rating (LCE, LCE-FB, LCE-FBW) Vibration Insulation Resistance Withstand Voltage (AC/DC24V) Dielectric Voltage (AC90-250V) Luminous Intensity (mcd = millicandela) CE UL RoHS Applicable Standards Power Consumption Current (mA @ 24V) AC/DC24V Watts Watts (@AC120V) AC90-250V Watts (@AC240V) Standby Power Red 28 0.7 1.6 2.0 AC/DC24V AC90-250V AC/DC24V (50-60 Hz) AC90-250V (50-60 Hz) Rated Voltage + or - 10% -25OC ~ +60OC Less than 90% 60 + or - 12 flashes per minute Max: 85 + or - 4dB (at 1m) Min: 70 + or - 4dB (at 1m) Intermittent, single-tone; Alarm 1: fast beep, Alarm 2: slow beep Indoor use only Upright only IP-65 IP-54 19.6m/s2 (30Hz) (2 hours each: front-back, right-left, up-down) More than 1 Megohm between terminals and chassis at DC500V AC500V applied between terminals and chassis for 1 minute without breaking insulation AC1500V applied between terminals and chassis for 1 minute without breaking insulation Red Amber Green Blue Clear 760mdc 830mcd 1290mcd 210mcd 400mcd EN60958-1: 1993 UL Component Recognition per UL-508 (File No. E215660) RoHS Directive 2005/95/EC Amber Green 28 22 0.7 0.6 1.6 1.5 2.0 1.9 0.8W @ AC120V Blue 23 0.6 1.5 1.9 Clear 23 0.6 1.5 1.9 Steady 40 1.0 1.6 2.0 Inrush Steady 250 40 ----1.0 ----1.6 ----2.0 1.1W @ AC240V Inrush 250 ------------- Contact Capacity (IS = current capacity; VS = withstand voltage; VC = dielectric breakdown voltage; IL = leakage current) AC/DC24V AC90-250V LED Light Module Alarm Power Supply LED Light Module (Signal wire) Alarm (Signal wire) Power Supply Power Supply Inrush Leakage Current Fuse (not included) Contact Capacity IS >= 100mA; VS >= AC35V IS >= 300mA; VS >= AC35V IS >= 500mA; VS >= AC35V Transistor Capacity (NPN and PNP) IC >= 100mA; VC >= 35V IC >= 300mA; VC >= 35V Contact Capacity IS >= 100mA; VS >= AC35V IS >= 10mA; VS >= AC35V IS >25A Transistor Capacity (NPN) IC >= 100mA; VC >= 35V IC >= 200mA; VC >= 35V IS >= 10A @ AC100; IS >= 25A @ AC250V (200sec) IL = 0.1mA or less 1A (250V)