BFC2 808 ..... www.vishay.com Vishay BCcomponents O 5 mm Film Dielectric Trimmers FEATURES * Housing diameter 5 mm * Top and bottom or top adjustment * Round head * Mounting: radial * Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 APPLICATIONS * Impedance matching circuits * RF * Medical * For consumer and industrial equipment QUICK REFERENCE DATA Rated DC voltage 150 VDC Test DC voltage for 1 min 300 VDC Maximum contact resistance 10 m Minimum insulation resistance Category temperature range Climatic category (IEC 60068) 10 000 M PP -40 C to +70 C PTFE -40 C to +85 C PP 40/070/21 PTFE 40/085/21 Minimum storage temperature -55 C Related specification IEC 60418-1 and 4 Effective angle of rotation Operating torque Maximum axial thrust Capacitance range (Cmin. / Cmax.) Life of trimmer 180 (rotation in 180 only, see "Life of Trimmer") Cmax. < 20 pF 1 mNm to 15 mNm Cmax. 20 pF 1 mNm to 25 mNm 2N 0.35 pF / 1.5 pF to 4 pF / 27 pF Maximum 10 cycles: rotation in 180 only (the electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) Sampling and data evaluation for quality level in accordance with "MIL-STD-105D" and "IEC 60410": Quality level < 0.15 % major defects < 0.65 % minor defects Each capacitor is tested for minimum Cmax. and is also subjected to the full test voltage. Revision: 04-Aug-15 Document Number: 28526 1 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents DIMENSIONS in millimeters O 2.2 0.6 (1) 0.5 H (1) 0.4 + 0.20 0.3 + 0.10 3 0.5 1.15 max. 2.2 0.2 5.6 0.2 W + 0.7 3 - 0.5 L 1.6 0.2 5.1 0.2 P 1.3 Hole pattern Trimmers BFC2 808 ..... series, with round head CAPACITANCE AND RELEVANT PHYSICAL DIMENSIONS Cmin. / Cmax. (pF) Hmax. (mm) Wmax. (mm) Lmax. (mm) 0.35 / 1.5 7.0 5.5 7.3 1.5 / 5 7.0 5.5 7.3 3 / 10 7.0 5.5 7.3 3 / 15 8.8 5.5 7.3 4 / 20 8.8 5.5 7.3 4 / 27 9.0 6.2 7.8 Revision: 04-Aug-15 Document Number: 28526 2 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents MOUNTING PACKAGING The trimmer has a lead pitch of 5.08 mm or 5.6 mm and can be mounted on printed-circuit boards with a minimum hole diameter of 1.25 mm. Bulk packaged in cardboard boxes lined with expanded plastic, 1000 units per box. ORDERING INFORMATION Cmin. / Cmax. (pF) TOP AND BOTTOM ADJUSTMENT (P = 5.6 mm) POLYTETRAFLUORETHYLENE 0.35 / 1.5 22158 POLYPROPYLENE 1.2 / 5 1.5 / 5 23508 1.5 / 7 3 / 10 23109 3 / 15 23159 4 / 20 23209 4 / 27 23279 CATALOG NUMBER BFC2 808 ..... TOP ADJUSTMENT ONLY (P = 5.6 mm) TOP ADJUSTMENT ONLY (P = 5.08 mm) - - 24508 24708 - 20508 20109 20159 20209 20279 ELECTRICAL DATA tan AT Cmax. x 10-4 GUARANTEED MAX. Cmin. / MIN. Cmax. AT 200 kHz (pF) 0.35 / 1.5 1.2 / 5 1 MHz 100 MHz TEMP. COEFF. (1) (10-6/K) MIN. fres AT Cmax. (MHz) COLOR OF BASE SMALLEST PACKAGING QUANTITY 10 10 - -450 550 -200 550 - Grey 1000 1000 1.5 / 5 10 25 -200 550 700 Grey 1000 1.5 / 7 10 - -50 550 - Grey 1000 3 / 10 10 25 -250 550 500 Yellow 1000 3 / 15 10 25 -250 550 400 Blue 1000 4 / 20 10 25 -250 400 300 Green 1000 4 / 27 10 25 -250 400 300 Red 1000 CATALOG NUMBER BFC2 ... ..... .... 808 22158 .... 808 24508 .... 808 20508 .... 808 23508 .... 808 24708 .... 808 20109 .... 808 23109 .... 808 20159 .... 808 23159 .... 808 20209 .... 808 23209 .... 808 20279 .... 808 23279 Note (1) C: 60 % to 80 % of C max.; Tamb: from +20 C to +70 C SOLDERING CONDITIONS For general soldering conditions and wave soldering profile, we refer to the application note "Soldering Guidelines for Film Capacitors": www.vishay.com/doc?28171 TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE 4.2 14 IEC 60068 TEST METHOD 19 21 TEST PROCEDURE REQUIREMENTS Method of mounting Capacitance drift Method A After TC measurement Thrust Robustness of terminations: Axial thrust of 2 N C/C: 3 % for Cmax. 10 pF C/C: 2 % for Cmax. > 10 pF C/C: 0.4 % 21.1 Ua Tensile 1N No damage 21.2 Ub Bending 1 cycle No damage Revision: 04-Aug-15 Document Number: 28526 3 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 BFC2 808 ..... www.vishay.com Vishay BCcomponents TEST PROCEDURES AND REQUIREMENTS IEC 60418-1 CLAUSE IEC 60068 TEST METHOD TEST PROCEDURE 22 Na Rapid change of temperature 1 cycle; 0.5 h at lower and 0.5 h at upper category temperature C/C: 2.5 % 23 T Soldering: Ta Solderability Solder bath immersion 3 mm; 235 C; 2 s Good wetting; no mechanical damage REQUIREMENTS Tb Resistance to heat Solder bath: 260 C; 10 s No mechanical damage 24 Eb Impact bump 4000 10 bumps; 40 g; 6 ms C/C: 1 %; no mechanical damage 25 Fc Vibration Frequency 10 Hz to 55 Hz; amplitude 0.75 mm; 1.5 h C/C: 1 %; no mechanical damage 26 C/C: 4 % Climatic sequence: 26.1 B Dry heat 16 h at upper category temperature tan or PP and PTFE foil: 15 x 10-4 tan for PC foil: 80 x 10-4 Rins.: 10 000 M Rotor contact R: 10 m 26.2 D Damp heat accelerated, first cycle 1 cycle; 24 h; +40 C; 95 % to 100 % RH Voltage proof: 300 V for 1 min 26.3 Aa Cold 16 h; -40 C Visual examination: no mechanical damage Damp heat accelerated, remaining cycles 1 cycle; 24 h; +40 C; 95 % to 100 % RH Operating torque: 1 mNm to 20 mNm for Cmax. < 20 pF; 1 mNm to 30 mNm for Cmax. 20 pF Damp heat steady state 21 days; +40 C; 90 % to 95 % RH C/C: 3 % tan for PP and PTFE foil: 15 x 10-4; tan for PC foil: 80 x 10-4 Rins.: 10 000 M; Rotor contact R: 10 m Voltage proof: 300 V for 1 min Visual examination: no mechanical damage Operating torque: 1 mNm to 20 mNm for Cmax. < 20 pF; 1 mNm to 30 mNm for Cmax. 20 pF Mechanical endurance 10 cycles Maximum 10 cycles: rotation in 180 only. (The electrical and mechanical performance is not guaranteed if rotated beyond 10 cycles) C/C: 3 % C/C after axial thrust: 0.3 %; rotor contact R: 10 m Voltage proof: 300 V for 1 min Visual examination: no mechanical damage Operating torque: 0.5 mNm to 22.5 mNm for Cmax. < 20 pF; 0.5 mNm to 30 mNm for Cmax. 20 pF 26.5 27 Ca 29 Revision: 04-Aug-15 Document Number: 28526 4 For technical questions, contact: dc-film@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. (c) 2017 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED Revision: 08-Feb-17 1 Document Number: 91000 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Vishay: BFC280823159 BFC280823279 BFC280823209 BFC280823508 BFC280823109 BFC280820209