engineered to light up your design www.vcclite.com 1.800.522.5546 1091M Series Non-Relampable LED Indicator Lights Description and Features All dimensions in inches. Solid-state indicator lights complete with built-in current-limiting resistor and rectifier diode. O.630 Mounting: Will snap-fit into O.500/.505 hole in panels .020/.100 thick. Push-on speednut SN0461 also available. Mounting hole pattern on page SP2. .380 Wire Leads: No. 22 AWG (105C) 4.40/4.80 long, stripped .430/.570 1.130 Lens: Polycarbonate Anode(+): Red lead O.500 MAX. Bezel: Polished stainless steel. Housing: White Nylon Lens C olor R ed G reen Y ellow Internal R es is tor (ohms ) Model No. (6V ) 1091M1-6V 1091M5-6V 150 LE D Solid S tate Model No. (12V ) 1091M1-12V 1091M5-12V 1091M7-12V 390 V oltage T able Nominal 6V 12V 24V 125 V AC V AC 5 to 11 10 to 20 22 to 32 105 to 125 Indicator Model No. (24V ) 1091M1-24V 1091M5-24V 1091M7-24V 1000 Lens C olor VD C 3.5 to 6.5 6 to 13.5 12 to 24 - Model No. (105-125 V AC *) 1091M1-125V AC 1091M5-125V AC 1091M7-125V AC (2) 3.9K 1/2W* (One Internal) Incorporates LE D* R ed 4304H1 G reen 4304H5 Y ellow 4304H7 *125 VAC supplied with 6" white wire, stripped 1/2" with external 3.9K 1/2 watt resistor attached to one lead, covered with shrink tubing insulation. * Also incorporates 1N4004 (400 P.I.V.) rectifier diode. To use 24V model: Beyond 32VAC add 30 ohms per volt; beyond 24 VDC add 50 ohms per volt. Use 1/2W resistor up to 50V; 1W resistor for 50V to 70V; 2W resistor for 75V to 125V. Do not use beyond 125V. CML and Chicago Miniature Lamp are registered trademarks of Visual Communications Company, LLC. Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: VCC: 1091M5-6V 1091M1-125VAC 1091M7-12V 1091M1-6V 1091M7-125VAC 1091M1-12V 1091M5-24V 1091M5-12V 1091M7-24V 1091M1-24V 1091M5-125VAC