3 www.fairchildsemi.com
100319
Absolute Maximum Ratings(Note 1) Recommended Operating
Conditions
Note 1: The “A bsolute Maximum Ratings” are thos e values bey ond which
the saf ety of the device cannot be gu aranteed. Th e device shou ld not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the absolute maximum rating.
The “R ecomm ended Ope rating Co ndition s” table will define the condit ions
for actu al device operation.
Note 2: ESD testing conforms to MIL-STD-883, Method 3015.
Commercial Version
DC Electrical Characteristics (Note 3)
VEE = −4.2V to −5.7V, VCC = VCCA = GND, TC = 0°C to +85°C
Note 3: The specified limits represent the “worst case” value for the parameter. Since these values normally occur at the temperature extremes, additional
noise immunity an d gu ardband ing c an be achi eved by d ecre asin g the al l owable syste m operating ranges. Condit i ons fo r t estin g sho w n in the tables are cho-
sen to guarante e operation under “worst case” conditions.
AC Electrical Characteristics
VEE = −4.2V to −5.7V, VCC = VCCA = GND
Storage Temperature (TSTG)−65°C to +150°C
Maximu m Junct i on Tem per atu re (T J)+150°C
Pin Potential to Ground Pin (VEE)−7.0 V to +0.5V
Input Voltag e (DC) VEE to +0.5V
Output Current (DC Output HIGH) −100 mA
ESD (Note 2) ≥2000V
Case Temperature (TC)
Commercial 0°C to +85°C
Industrial −40°C to +85°C
Supply Voltage (VEE)−5.7V to −4.2V
Symbol Parameter Min Typ Max Units Conditions
VOH Output HIGH Voltage −1025 −955 −870 mV VIN = VIH(Max) Loading with
VOL Output LOW Voltage −1830 −1705 −1620 mV or VIL(Min) 25Ω to −2.0V
VOHC Output HIGH Voltage −1035 mV VIN = VIH(Min) Loading with
VOLC Output LOW Voltage −1610 mV or VIL(Max) 25Ω to −2.0V
VOLZ Cut-Off LOW −1950 mV VIN = VIH(Min) OE = LOW
Voltage or VIL(Max)
VIH Input HIGH V olta ge −1110 −870 mV Guaranteed HIGH Signal for All Inputs
VIL Input LOW V olta ge −1830 −1530 mV Guaranteed LOW Signal for All Inputs
IIL Input LOW Current 100 µAV
IN = VIL(Min)
IIH Input HIGH Current 360 µAV
IN = VIH(Max)
IEE Power Supply Current, Normal −119 −30 mA
IEEZ Power Supply −219 −75 mA Inputs Open,
Current, Cut-Off OE = LOW
Symbol Parameter TC = 0°CT
C = +25°CT
C = +85°CUnits Conditions
Min Max Min Max Min Max
tPLH Propagation Delay 0.65 2.10 0.65 2.10 0.65 2.10 ns
Figures 1, 2
tPHL Data to Output
tPZH Propagation Delay 1.8 4.1 1.8 4.1 1.8 4.1 ns
tPHZ OE to Output 1.2 2.9 1.2 2.9 1.2 2.9
tTLH Transition Time 0.45 1.30 0.45 1.30 0.45 1.30 ns
tTHL 20% to 80%, 80% to 20%