PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 01/8/08 01/8/08 15/8/08Suresh G. C
RELEASED
2211S-14G
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Single Row Right Angle - 14 Way
2211S-XXG-F1_9_DWG
M10001422
01/08/08
DATE: SIZE
SCALE: NTS U.O.M.: mm SHEET: 1 OF 2
DWG NO. ELECTRONIC FILE REV
A
01/08/08 A
DATE:
15/08/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Specifications:
Current rating : 3A ac/dc.
Voltage rating : 250V ac/dc.
Maximum contact resistance : 20mΩ.
Minimum insulation resistance : 1000MΩ.
Withstanding voltage : 600V ac for one minute.
Operating temperature range : -40°C to +105°C.
Material and Finish:
Insulator : High temperature plastic (PBT).
Insulator colour : Black.
Contact : Copper alloy.
Plated : Gold plated.
Dimensions : Millimetres
PCB Layout
SIZE DWG NO.
PART NO.
ECN # REV
-A
REVISIONS
DESCRIPTION DRAWN DATE DATE DATECHECKD APPRVD
Veena 01/8/08 01/8/08 15/8/08Suresh G. C
RELEASED
2211S-14G
This data sheet and its contents (the "Information") belong to the Premier Farnell Group
(the "Group") or are licensed to it. No licence is granted for the use of it other than for
information purposes in connection with the products to which it relates. No licence
of any intellectual property rights is granted. The Information is subject to change with-
out notice and replaces all data sheets previously supplied. The Information supplied is
believed to be accurate but the Group assumes no responsibility for its accuracy or
completeness, any error in or omission from it or for any use made of it. Users of this
data sheet should check for themselves the Information and the suitability of the prod-
ucts for their purpose and not make any assumptions based on information included or
omitted. Liability for loss or damage resulting from any reliance on the Information or
use of it (including liability resulting from negligence or where the Group was aware of
the possibility of such loss or damage arising) is excluded. This will not operate to limit
or restrict the Group's liability for death or personal injury resulting from its negligence.
SPC MULTICOMP is the registered trademark of the Group. © Premier Farnell plc 2008.
TOLERANCES: DRAWN BY:
Veena
Suresh
G.Cook
CHECKED BY:
APPROVED BY:
DATE: DRAWING TITLE:
Single Row Right Angle - 14 Way
2211S-XXG-F1_9_DWG
M10001422
01/08/08
DATE:
SCALE: NTS U.O.M.: mm SHEET: 2 OF 2
ELECTRONIC FILE REV
A
01/08/08 A
DATE:
15/08/08
UNLESS OTHERWISE
SPECIFIED,
DIMENSIONS ARE
FOR REFERENCE
PURPOSES ONLY.
Part Number Table
Description Part Number
Header, 1 Row, Vertical, 14 Way 2211S-14G
2211
Right Angle
S
Number of Positions
14
Gold Plated
G
-
Part Number Explanation:
Plated : G = Gold Plated.
http://www.farnell.com
http://www.newark.com
http://www.cpc.co.uk
