Characteristic / Test Conditions
Drain-Source Breakdown Voltage (VGS = 0V, ID = 250µA)
On State Drain Current 2 (VDS > ID(on) x RDS(on) Max, VGS = 10V)
Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.])
Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V)
Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125°C)
Gate-Source Leakage Current (VGS = ±30V, VDS = 0V)
Gate Threshold Voltage (VDS = VGS, ID = 1mA)
050-7324 Rev - 7-2002
MAXIMUM RATINGS All Ratings: TC = 25°C unless otherwise specified.
Symbol
VDSS
ID
IDM
VGS
VGSM
PD
TJ,TSTG
TL
IAR
EAR
EAS
Parameter
Drain-Source Voltage
Continuous Drain Current @ TC = 25°C
Pulsed Drain Current 1
Gate-Source Voltage Continuous
Gate-Source Voltage Transient
Total Power Dissipation @ TC = 25°C
Linear Derating Factor
Operating and Storage Junction Temperature Range
Lead Temperature: 0.063" from Case for 10 Sec.
Avalanche Current 1 (Repetitive and Non-Repetitive)
Repetitive Avalanche Energy 1
Single Pulse Avalanche Energy 4
UNIT
Volts
Amps
Volts
Watts
W/°C
°C
Amps
mJ
STATIC ELECTRICAL CHARACTERISTICS
Symbol
BVDSS
ID(on)
RDS(on)
IDSS
IGSS
VGS(th)
UNIT
Volts
Amps
Ohms
µA
nA
Volts
MIN TYP MAX
800
16 0.43
100
500
±100
35
APT8043HLL
800
16
64
±30
±40
250
2.0
-55 to 150
300
16
30
1300
G
D
S
CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed.
APT Website - http://www.advancedpower.com
APT8043HLL
800V 16A 0.430ΩΩ
ΩΩ
Ω
Power MOS 7® is a new generation of low loss, high voltage, N-Channel
enhancement mode power MOSFETS. Both conduction and switching
losses are addressed with Power MOS 7® by significantly lowering RDS(ON)
and Qg. Power MOS 7® combines lower conduction and switching losses
along with exceptionally fast switching speeds inherent with APT's
patented metal gate structure.
• Lower Input Capacitance • Increased Power Dissipation
• Lower Miller Capacitance •Easier To Drive
• Lower Gate Charge, Qg •Hermetic TO-258 Package
•Military Screening Available
POWER MOS 7 R MOSFET
TO-258
DYNAMIC CHARACTERISTICS APT8043 HLL
050-7324 Rev - 7-2002
THERMAL CHARACTERISTICS
Symbol
RθJC
RθJA
MIN TYP MAX
0.50
40
UNIT
°C/W
Characteristic
Junction to Case
Junction to Ambient
Symbol
Ciss
Coss
Crss
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Test Conditions
VGS = 0V
VDS = 25V
f = 1 MHz
VGS = 10V
VDD = 0.5 VDSS
ID = ID[Cont.] @ 25°C
VGS = 15V
VDD = 0.5 VDSS
ID = ID[Cont.] @ 25°C
RG = 1.6Ω
MIN TYP MAX
2500 3000
486 730
80 120
86 130
13 16
53 80
918
510
25 38
510
UNIT
pF
nC
ns
Characteristic
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Total Gate Charge 3
Gate-Source Charge
Gate-Drain ("Miller") Charge
Turn-on Delay Time
Rise Time
Turn-off Delay Time
Fall Time
Characteristic / Test Conditions
Continuous Source Current (Body Diode)
Pulsed Source Current 1 (Body Diode)
Diode Forward Voltage 2 (VGS = 0V, IS = -ID[Cont.])
Reverse Recovery Time (IS = -ID[Cont.], dlS/dt = 100A/µs)
Reverse Recovery Charge (IS = -ID[Cont.], dlS/dt = 100A/µs)
Peak Diode Recovery dv/dt 5
SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS
UNIT
Amps
Volts
ns
µC
V/ns
MIN TYP MAX
16
64
1.3
680
10.6 10
Symbol
IS
ISM
VSD
t rr
Q rr
dv/dt
1Repetitive Rating: Pulse width limited by maximum junction 3See MIL-STD-750 Method 3471
temperature. 4Starting Tj = +25°C, L = 10.16mH, RG = 25Ω, Peak IL = 16A
2Pulse Test: Pulse width < 380 µs, Duty Cycle < 2% 5dv
/dt numbers reflect the limitations of the test circuit rather than the
device itself. IS ≤ -ID[Cont.] di/dt ≤ 700A/µs VR ≤ VDSS TJ ≤ 150°C
APT Reserves the right to change, without notice, the specifications and information contained herein.
APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336
5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058
10-5 10-4 10-3 10-2 10-1 1.0 10
RECTANGULAR PULSE DURATION (SECONDS)
FIGURE 1, MAXIMUM EFFECTIVE TRANSIENT THERMAL IMPEDANCE, JUNCTION-TO-CASE vs PULSE DURATION
ZθJC, THERMAL IMPEDANCE (°C/W)
0.50
0.1
0.05
0.01
0.005
0.001
Note:
Duty Factor D = t1/t2
Peak TJ = PDM x ZθJC + TC
t1
t2
PDM
0.1
0.02
0.05
0.2
D=0.5
0.01
SINGLE PULSE
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 2, HIGH VOLTAGE OUTPUT CHARACTERISTICS FIGURE 3, LOW VOLTAGE OUTPUT CHARACTERISTICS
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPERES)
FIGURE 4, TRANSFER CHARACTERISTICS FIGURE 5, RDS(ON) vs DRAIN CURRENT
TC, CASE TEMPERATURE (°C) TJ, JUNCTION TEMPERATURE (°C)
FIGURE 6, MAXIMUM DRAIN CURRENT vs CASE TEMPERATURE FIGURE 7, BREAKDOWN VOLTAGE vs TEMPERATURE
TJ, JUNCTION TEMPERATURE (°C) TC, CASE TEMPERATURE (°C)
FIGURE 8, ON-RESISTANCE vs. TEMPERATURE FIGURE 9, THRESHOLD VOLTAGE vs TEMPERATURE
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE ID, DRAIN CURRENT (AMPERES) ID, DRAIN CURRENT (AMPERES)
(NORMALIZED)
VGS(TH), THRESHOLD VOLTAGE BVDSS, DRAIN-TO-SOURCE BREAKDOWN RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE ID, DRAIN CURRENT (AMPERES)
(NORMALIZED) VOLTAGE (NORMALIZED)
0 5 10 15 20 25 30
0246810 0510152025303540
25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
-50 -25 0 25 50 75 100 125 150 -50 -25 0 25 50 75 100 125 150
80
70
60
50
40
30
20
10
0
16
14
12
10
8
6
4
2
0
2.5
2.0
1.5
1.0
0.5
0.0
50
40
30
20
10
0
1.40
1.30
1.20
1.10
1.00
0.90
0.80
1.15
1.10
1.05
1.00
0.95
0.90
1.2
1.1
1.0
0.9
0.8
0.7
0.6
Typical Performance Curves
Graph Deleted
050-7324 Rev - 7-2002
ID = 0.5 ID [Cont.]
VGS = 10V
5.5V
6V
6.5V
7V
7.5V
VGS =15 &10 V 8V
VGS=10V
VGS=20V
NORMALIZED TO
VGS = 10V @ 0.5 ID [Cont.]
TJ = +125°C
TJ = +25°C
TJ = -55°C
VDS> ID (ON) x RDS (ON)MAX.
250µSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
APT8043 HLL
VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS) VDS, DRAIN-TO-SOURCE VOLTAGE (VOLTS)
FIGURE 10, MAXIMUM SAFE OPERATING AREA FIGURE 11, CAPACITANCE vs DRAIN-TO-SOURCE VOLTAGE
Qg, TOTAL GATE CHARGE (nC) VSD, SOURCE-TO-DRAIN VOLTAGE (VOLTS)
FIGURE 12, GATE CHARGES vs GATE-TO-SOURCE VOLTAGE FIGURE 13, SOURCE-DRAIN DIODE FORWARD VOLTAGE
VGS, GATE-TO-SOURCE VOLTAGE (VOLTS) ID, DRAIN CURRENT (AMPERES)
IDR, REVERSE DRAIN CURRENT (AMPERES) C, CAPACITANCE (pF)
1 10 100 800 .01 .1 1 10 50
0 20 40 60 80 100 120 140 0.3 0.5 0.7 0.9 1.1 1.3 1.5
64
10
1
16
12
8
4
0
10,000
5,000
1,000
500
100
10
200
100
10
1
APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336
5,256,583 4,748,103 5,283,202 5,231,474 5,434,095 5,528,058
050-7324 Rev - 7-2002
APT8043 HLL
TC =+25°C
TJ =+150°C
SINGLE PULSE
OPERATION HERE
LIMITED BY RDS (ON)
10mS
1mS
100µS
VDS=250V
VDS=100V
VDS=400V
ID = ID [Cont.]
Crss
Ciss
Coss
TJ =+150°C
TJ =+25°C
TO-258 Package Outline
5.08 (.200) BSC
1.14 (.045)
0.88 (.035)
17.65 (.695)
17.39 (.685)
4.19 (.165)
3.94 (.155)
Drain
Source
Gate
1.65 (.065)
1.39 (.055) Dia. Typ.
3 Leads
17.96 (.707)
17.70 (.697)
19.05 (0.750)
12.70 (0.500)
21.21 (.835)
20.70 (.815)
8.89 (.350)
8.63 (.340)
Dimensions in Millimeters and (Inches)
3.56 (.140) BSC
6.86 (.270)
6.09 (.240)
13.84 (.545)
13.58 (.535)
