DISCRETE CERAMICS DATA SHEET www.phycomp-components.com PRC201 5%; 1% Power chip resistors size 1218 Product specification Supersedes data of 27th April 2001 2001 May 28 Rev.15 Phycomp Product specification Power chip resistors size 1218 FEATURES * Reduced size of final equipment PRC201 5%; 1% QUICK REFERENCE DATA DESCRIPTION * Low assembly costs Resistance range * Higher component and equipment reliability Resistance tolerance and series: * Excellent performance at high frequency. APPLICATIONS * Power supplies in small sized equipment * Camcorders * Portable radio, CD and cassette players * Automotive. VALUE 1 to 1 M 1 R 1 M 5%, 1%; E24/E96 series Temperature coefficient: 1 R < 10 200 x 10-6/K 10 R 1 M 100 x 10-6/K Absolute maximum dissipation at Tamb = 70 C 1W Maximum permissible voltage 200 V (DC or RMS) Maximum permissible current 6 A (DC or RMS) Operating temperature range -55 C to +155 C Basic specification IEC 60115-8 DESCRIPTION The resistors are constructed on a high grade ceramic body (aluminium oxide). Internal metal electrodes are added at each end and connected by a resistive paste which is applied to the top surface of the substrate. The composition of the paste is adjusted to give the approximate resistance required and the value is trimmed to within tolerance, by laser cutting of this resistive layer. The resistive layer is covered with a protective coating and printed with the resistance value. Finally, the two external end terminations are added. To guarantee optimum solderability the outer layer consists of a lead-tin alloy. 2001 May 28 Rev.15 2 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% ORDERING INFORMATION Table 1 Ordering code indicating resistor type and packing ORDERING CODE 2322 735 ..... TYPE TOL. (%) BLISTER TAPE ON REEL 5000 units PRC201 5 60... 1 2.... - 90006 Jumper 0 PRC201; note 1 Note 1. The jumper has a maximum resistance Rmax = 20 m and a rated current IR = 6 A. Ordering code (12NC) Table 2 Last digit of 12NC * The resistors have a 12-digit ordering code starting with 2322 RESISTANCE DECADE LAST DIGIT * The subsequent four or five digits indicate the resistor type and packing; see Table 1. 1 to 9.1 8 10 to 91 9 100 to 910 1 1 to 9.1 k 2 10 to 91 k 3 100 to 910 k 4 1 M 5 * The remaining digits indicate the resistance value: - The first 2 digits for 5% or 3 digits for 1% tolerance products indicate the resistance value. ORDERING EXAMPLE The ordering code of a PRC201 resistor, value 470 with 5% tolerance, supplied on blister tape of 5 000 units per reel is: 2322 735 60471. - The last digit indicates the resistance decade in accordance with Table 2. 2001 May 28 Rev.15 3 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 FUNCTIONAL DESCRIPTION PRC201 5%; 1% Limiting values Product characterization Standard values of nominal resistance are taken from the E24 or E96 series for resistors with a tolerance of 5% or 1%. The values of the E24/E96 series are in accordance with "IEC publication 60063". TYPE LIMITING VOLTAGE(1) (V) LIMITING CURRENT (A) LIMITING POWER (W) 200 6 1 PRC201 Note 1. The maximum voltage that may be continuously applied to the resistor element, see "IEC publication 60115-8". DERATING The power that the resistor can dissipate depends on the operating temperature; see Fig.1. CCB412 handbook, 4 columns Pmax (%Prated) 100 50 0 -55 Fig.1 2001 May 28 Rev.15 0 50 70 100 155 Tamb (C) Maximum dissipation (Pmax) in percentage of rated power as a function of the ambient temperature (Tamb). 4 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% PULSE LOADING CAPABILITIES MLB883 3 10 handbook, full pagewidth P max (W) single pulse 10 2 A B t p /t i =1000 10 100 2 1 10 1 10 6 10 5 10 4 10 3 10 2 10 1 1 t i (s) Single pulse A: Rn 300 . Single pulse B: Rn > 300 . Fig.2 Pulse on a regular basis; maximum permissible peak pulse power ( P max ) as a function of pulse duration for R 10 k, single pulse and repetitive pulse tp/ti. MLB884 800 handbook, full pagewidth Vmax (V) 600 400 200 0 10 6 10 5 Fig.3 2001 May 28 Rev.15 10 4 10 3 10 2 10 1 t i (s) 1 Pulse on a regular basis; maximum permissible peak pulse voltage ( V max ) as a function of pulse duration. 5 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% MBD582 10 4 handbook, full pagewidth Vmax (V) 1.2/50 s 10 3 10 2 10/700 s 10 10 10 2 10 3 10 4 10 5 10 6 R n () 10 7 These pulses may not be applied on a regular basis. Fig.4 2001 May 28 Rev.15 Maximum permissible peak pulse voltage without failing to `open circuit' in accordance with DIN IEC 60040 (CO) 533. 6 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% Application information MRA630 MRA631 200 handbook,200 halfpage handbook, halfpage T ( oC) T o ( C) 150 150 hot-spot hot-spot 100 100 solder joint 50 50 solder joint 0 0 0.2 0.4 0.6 0.8 0 0 1 P (W) Fig.5 Temperature rise at hot-spot and solder joint as a function of dissipated power, for a resistor mounted horizontally on ceramic PCB. Fig.6 0.2 0.4 0.6 0.8 P (W) 1 Temperature rise at hot-spot and solder joint as a function of dissipated power, for a resistor mounted horizontally on a FR4 PCB. MBD097 100 handbook, halfpage T ( o C) hot-spot 75 bottom side 50 solder joint 25 0 0 0.2 0.4 0.6 0.8 1.0 P (W) Fig.7 Temperature rise at hot-spot and solder joint as a function of dissipated power, for a resistor horizontally mounted on the test substrate; see Fig.8. 2001 May 28 Rev.15 7 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% handbook, full pagewidth electroplated (SnPb) Cu 35 FR4, 1.6 mm 2.0 5.0 1.9 20 1.0 25 20 85 MBD096 Dimensions in mm. Fig.8 Test substrate layout. The tracks on the substrate for values below 33 m are wider. With this substrate, the resistance of the tracks becomes significant compared to the resistor tested. Due to the current loading required for resistor testing these tracks may be damaged. 2001 May 28 Rev.15 8 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 MECHANICAL DATA PRC201 5%; 1% Outlines Mass per 100 units MASS (g) TYPE PRC201 protective coat resistor layer inner electrode ;; ;;; ;;; ;;; ;;; 220R ;;; ;;; ;;; ;;; handbook, halfpage 3 T Marking tt 4-DIGIT MARKING For values up to 910 the R is used as a decimal point. For values of 1 k or greater the letter K or M is used as the decimal point for the k or M indication. INDICATOR R 1 to 910 k K 1 M M RESISTANCE 120R 120 4K70 4.70 k PACKAGE MARKING The packing is also marked and includes resistance value, tolerance, catalogue number, quantity, production period, batch number and source code. 2001 May 28 Rev.15 MRA629 - 1 L Example MARKING protective coat W Magnitude indicators 1 to 910 ceramic substrate tb Each resistor is marked with the nominal resistance value. RESISTANCE end termination For dimensions see Table 3. Fig.9 Outlines. Table 3 TYPE PRC201 Chip resistor type and relevant physical dimensions; see Fig.9 L (mm) W (mm) T (mm) tt (mm) tb (mm) 3.05 0.15 4.60 0.20 0.55 0.10 0.45 0.25 0.50 0.25 9 www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% Unless otherwise specified the following values apply: TESTS AND REQUIREMENTS Temperature: 15 C to 35 C Essentially all tests are carried out in accordance with the schedule of "IEC publication 60115-8", category 55/155/56 (rated temperature range -55 to +155 C; damp heat, long term, 56 days). The testing also covers the requirements specified by EIA and EIAJ. Relative humidity: 45% to 75% Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar). In Table 4 the tests and requirements are listed with reference to the relevant clauses of "IEC publications 60115-8 and 60068"; a short description of the test procedure is also given. In some instances deviations from the IEC recommendations were necessary for our method of specifying. The tests are carried out in accordance with IEC publication 60068, "Recommended basic climatic and mechanical robustness testing procedure for electronic components" and under standard atmospheric conditions in accordance with "IEC 60068-1", subclause 5.3. All soldering tests are performed with mildly activated flux. Table 4 Test procedures and requirements IEC 60115-8 CLAUSE IEC 60068-2 TEST METHOD TEST PROCEDURE REQUIREMENTS Tests in accordance with the schedule of IEC publication 60115-8 4.4.1 visual examination 4.4.2 dimensions (outline) no holes; clean surface; no damage 0.45 mm T 0.65 mm gauge 4.4 mm W 4.8 mm 2.9 mm L 3.2 mm 4.5 resistance applied voltage (+0/-10%): R - Rnom: max. 5% or 1% R < 10 : 0.1 V 10 R < 100 : 0.3 V 100 R < 1 k: 1 V 1 k R < 10 k: 3 V 10 k R < 100 k: 10 V 100 k R < 1 M: 25 V 1 M: 50 V 4.18 20 (Tb) resistance to soldering heat unmounted chips; 10 1 s; 260 5 C: 4.29 45 (Xa) component solvent resistance isopropyl alcohol; H2O 4.17 20 (Ta) solderability unmounted chips completely immersed good tinning (95% covered); for 2 0.5 s in a solder bath at 235 2 C no damage 4.7 voltage proof on insulation 200 V (RMS) during 1 minute no breakdown or flashover 4.13 short time overload room temperature; dissipation 6.25 x Pn; 5 s (voltage not more than 2 x Vmax) R/R max.: (1% +0.05 ) 2001 May 28 Rev.15 1 R 1 M 10 R/R max.: (1% +0.05 ) no visible damage www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 IEC 60115-8 CLAUSE IEC 60068-2 TEST METHOD 4.33 4.19 4.6.1.1 4.24.2 TEST bending 14 (Na) 3 (Ca) 4.25.1 PRC201 5%; 1% PROCEDURE resistors mounted on a 90 mm glass epoxy resin PCB (FR4), bending: 2 mm no damage rapid change of temperature 30 minutes at LCT and 30 minutes at UCT; 5 cycles no visible damage insulation resistance 100 V (DC) after 1 minute Rins min.: 1000 M damp heat (steady state) 56 days; 40 2 C; 93 +2/-3% RH; loaded with 0.01Pn no visible damage endurance 1000 +48/-0 hours; 70 2 C; loaded with Pn or Vmax; 1.5 hours on and 0.5 hours off: no visible damage 1 R 1 M 4.23.2 27 (Ba) 4.8.4.2s` REQUIREMENTS endurance at upper category temperature 1000 +48/-0 hours; no load temperature coefficient at 20/LCT/20 C and 20/UCT/20 C: R/R max.: (1% +0.05 ) R/R max.: (1.0% +0.05 ) R/R max.: (3% +0.1 ) R/R max.: (3% +0.1 ) no visible damage R/R max.: (3% +0.1 ) 1 R < 10 R/R max.: 200 x 10-6/K 10 R R/R max.: 100 x 10-6/K Other tests in accordance with IEC 60115 clauses and IEC 60068 test method 4.17 20 (Ta) solderability (after ageing) 16 hours steam or 16 hours at 155 C; good tinning (95% covered); unmounted chips completely immersed no damage for 2 0.5 s in a solder bath at 235 2 C leaching unmounted chips 60 1 s; 260 5 C Other applicable tests 2001 May 28 Rev.15 11 good tinning; no leaching www.phycomp-components.com Phycomp Product specification Power chip resistors size 1218 PRC201 5%; 1% REVISION HISTORY Revision Date Change Notification Description Rev. 14 2001 Apr 27 - - Converted to Phycomp brand Rev.15 2001 May 28 EBB-01762000005/FD 2000 May 15 - 2% range discontinued 2001 May 28 Rev.15 12 www.phycomp-components.com