UHF RFID Inlays AD-226iM Dimensions Operating Frequency RF Protocol Chip EPC Memory USER Memory TID Memory 95 x 8.15 mm Global (860 - 960 MHz) ISO-18000-6C, EPC Class 1, Gen 2 NXP G2iM 256 bit 512 bit 96 bit [includes perma-locked unique 48 bit serial Common Applications Apparel and Retail General Purpose [extended memory requirements] Supply Chain, Inventory & Logistics number; 16 bit unalterable XTID header] Toll free US 866-903- RFID (7343) / rfid.info@averydennison.com International +1-770-965-0807 PART NUMBER Format Antenna dimensions (CDxMD) 600483 Dry Inlay 3.74 x 0.32 in (95 x 8.15 mm) Die-cut dimensions N/A Inlay substrate material Inlay-to-liner adhesive Liner material Face Sheet Standard pitch Standard web width Total thickness over chip Operating temperature PET N/A N/A N/A 0.625 in (15.875 mm) 3.875 in (98.43 mm) 10 - 13 mils (254-330.2 microns) -40 to 185F (-40 to 85C) 600456 Wet Inlay 3.74 x 0.32 in (95 x 8.15 mm) 3.885 x 0.44 in (98.7 x 11.2 mm) PET S-490 (FASSON) 1.5mil Clear PET N/A 0.625 in (15.875 mm) 4.125 in (104.78 mm) 14-17 mils (356-431.8 microns) -40 to 185F (-40 to 85C) RoHS EU Directive 2011/65/EU Compliant EU Directive 2011/65/EU Compliant 100% read tested with-of-tolerance inlay marked Inlay-side Out 6 in (152.4 mm) 100% read tested with-of-tolerance inlay marked Inlay-side Out 3 in (76.2 mm) 13 in (330.2 mm) 13 in (330.2 mm) 20,000 good +/- 10% 01 20,000 good +/- 10% 01 Quality assurance Un-wind direction Core size with adaptor insert Maximum roll outer diameter (not to exceed) Average # of units per roll Rev Care and handling: RFID inlays are sensitive to ESD. Observe standard industry practices relating to electronics/RFID to keep environmental impact and static charge to a minimum. Applications: This product should be tested by the customer/ user thoroughly under end use conditions to ensure the product meets the particular requirements. Avery Dennison does not represent that this product is fit for any particular purpose or use. Warranty: Please refer to Avery Dennison RFID standard terms and conditions. Product Information: Avery Dennison reserves the right to modify, change, supplement or discontinue product offerings at any time without notice. The information contained herein is believed to be reliable but Avery Dennison makes no representation concerning the accuracy or correctness of the data. Trademark statement: Avery Dennison, S490 and Fasson are trademarks of Avery Dennison Corporation. For the most recent information on Avery Dennison products, visit www.rfid.averydennison.com. (c) 2016 Avery Dennison Corp. All rights reserved. 170 Monarch Lane, Miamisburg, OH 45342, USA Third party trademarks and/or trade names used herein are the property of their respective owner(s). Some of the trademarks appear for identification purposes only.