This series of connectors is best suited to for wiring within ultra miniature electronic equipment such as cellular phones,

notebook-type personal computers, personal digital assistants PDA (PDA: Personal Digital Assistants). Wiring in the

moving hinge part of the newest two-axis rotation type cellular phones, can be more easily designed than with

conventional flexible print circuits FPC (FPC: Flexible Print Circuits). Further, by narrowing the width of the cable plug to its

utmost limit, these assembled connectors can be passed through the inside diameter of a hinge, so that workability during

assembly can be improved.

Mating height: 1.2 mm

Mating width: 5.1 mm

Ultra-miniature type connector, one of the

lowest profiles in this industry; Mating height:

1.2 mm (Refer to Figure below)

This connector achieves 0.4 mm pitch and low profile 1.2

mm mating height. Therefore the connector contributes to

reduced equipment thickness.

Structure permits easy designing of PCB

circuits

By adopting vertical mating of connectors, flexibility is

increased for connector mounting position. Further, by

of 2.8 mm, an assembled connector can be passed

through the inside diameter of a hinge. Further, vertical

mating of connectors improves assembly workability.

Structure takes into account electrical noise

prevention

Ultra thin coaxial cable (42 AWG) can be used, and by

covering the connector with a metal shell, electrical noise

can be prevented.

Setting up a suction surface on the receptacle allows for

Rated current

95 RH or less

Assembled cable plug passing through hinge hole (1) Assembled cable plug passing through hinge hole (2)

Cable plug (Width: 2.8 mm) Receptacle