TLUR2400, TLUR2401 Vishay Semiconductors Universal LED, O 1.8 mm Tinted Diffused Miniplast Package FEATURES * For DC and pulse operation * Luminous intensity categorized * End-to-end stackable in centre-to-centre spacing of 0.1" (2.54 mm) * Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC 19229 PRODUCT GROUP AND PACKAGE DATA * Product group: LED * Package: 1.8 mm (miniplast) * Product series: standard * Angle of half intensity: 20 APPLICATIONS * General indicating and lighting purposes PARTS TABLE PART COLOR, LUMINOUS INTENSITY TECHNOLOGY Red, IV > 15 mcd (typ.) GaAsP on GaP TLUR2400-AS12 Red, IV > 15 mcd (typ.) GaAsP on GaP TLUR2401 Red, IV = (4 to 32) mcd GaAsP on GaP TLUR2401-AS12 Red, IV = (4 to 32) mcd GaAsP on GaP TLUR2400 ABSOLUTE MAXIMUM RATINGS (Tamb = 25 C, unless otherwise specified) TLUR2400, TLUR2401 SYMBOL VALUE Reverse voltage PARAMETER VR 6 V DC Forward current IF 20 mA tp 10 s IFSM 0.5 A Tamb 55 C PV 60 mW Surge forward current Power dissipation TEST CONDITION UNIT Tj 100 C Operating temperature range Tamb - 40 to + 100 C Storage temperature range Tstg - 55 to + 100 C t 3 s, 2 mm from body Tsd 260 C t 5 s, 4 mm from body Tsd 260 C RthJA 450 K/W Junction temperature Soldering temperature Thermal resistance junction/ ambient ** Please see document "Vishay Material Category Policy": www.vishay.com/doc?99902 Document Number 83288 Rev. 1.4, 30-May-11 For technical support, please contact: LED@vishay.com www.vishay.com 1 This document is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR2400, TLUR2401 Vishay Semiconductors OPTICAL AND ELECTRICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) TLUR2400, TLUR2401, RED PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. TLUR2400 IV 4 15 TLUR2401 IV 4 MAX. UNIT mcd Luminous intensity 1) IF = 10 mA Dominant wavelength IF = 10 mA d 630 nm Peak wavelength IF = 10 mA p 640 nm Angle of half intensity IF = 10 mA 20 Forward voltage IF = 20 mA VF 2 Reverse voltage IR = 10 A VR VR = 0, f = 1 MHz Cj Junction capacitance 32 6 mcd deg 3 V 15 V 50 pF Note: 1) In one packing unit IVmin./IVmax. 0.5 LUMINOUS INTENSITY CLASSIFICATION GROUP LIGHT INTENSITY (mcd) STANDARD MIN. P 4 MAX. 8 Q 6.3 12.5 R 10 20 S 16 32 T 25 50 Note: Luminous intensity is tested at a current pulse duration of 25 ms. The above type numbers represent the order groups which include only a few brightness groups. Only one group will be shipped on each bag (there will be no mixing of two groups on each bag). In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one bag. In order to ensure availability, single wavelength groups will not be orderable. TYPICAL CHARACTERISTICS (Tamb = 25 C, unless otherwise specified) 0 40 20 IV rel - Relative Luminous Intensity 30 35 I F - Forward Current (mA) 10 30 25 20 15 10 5 40 1.0 0.9 50 0.8 60 70 0.7 80 0 0 17517 10 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (C) Figure 1. Forward Current vs. Ambient Temperature www.vishay.com 2 0.6 0.4 0.2 0 0.2 0.4 0.6 95 10094 Figure 2. Rel. Luminous Intensity vs. Angular Displacement For technical support, please contact: LED@vishay.com Document Number 83288 Rev. 1.4, 30-May-11 This document is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR2400, TLUR2401 Vishay Semiconductors 10 IV rel - Relative Luminous Intensity IF - Forward Current (mA) 100 super red 10 1 0.1 1 0 16634 2 3 4 0.1 1 10 100 IF - Forward Current (mA) 95 10076 Figure 3. Forward Current vs. Forward Voltage Figure 5. Relative Luminous Intensity vs. Forward Current 1.2 1.6 red red 1.0 Irel - Relative Intensity IV rel - RelativeLuminous Intensity 1 0.01 5 VF - Forward Voltage (V) red 1.2 0.8 0.4 IF = 10 mA 0 0 95 10074 20 40 60 80 100 Tamb - Ambient Temperature (C) Figure 4. Rel. Luminous Intensity vs. Ambient Temperature 0.8 0.6 0.4 0.2 0.0 550 590 17521 630 670 710 750 - Wavelength (nm) Figure 6. Relative Intensity vs. Wavelength PACKAGE DIMENSIONS in millimeters Drawing-No.: 6.544-5052.01-4 Issue: 1; 12.10.95 95 11262 Document Number 83288 Rev. 1.4, 30-May-11 For technical support, please contact: LED@vishay.com www.vishay.com 3 This document is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 TLUR2400, TLUR2401 Vishay Semiconductors REEL DIMENSIONS in millimeters TAPE 355 52 max. Diodes: anode before cathode Phototransistors: emitter before collector Code 21 90 Adhesive tape Identification label Reel Diodes: cathode before anode Phototransistors: collector before emitter Code 12 30 Paper 48 45 Identification label: Vishay/type/group/tape code/production code/quantity Tape 948641 94 8671 Figure 7. Reel Figure 8. LED in Tape TAPE DIMENSIONS in millimeters 1 2 "H" 0.5 9 12 0.3 18 +1 - 0.5 0.3 0.2 12.7 1 0.9 max. O4 2.54 0.2 + 0.6 - 0.1 5.08 0.7 6.35 12.7 0.2 Quantity per: 0.7 Measure limit over 20 index-holes: 1 Reel (Mat. - No. 1764) 2000 94 8171 www.vishay.com 4 Option Dim. "H" 0.5 mm AS 17.3 For technical support, please contact: LED@vishay.com Document Number 83288 Rev. 1.4, 30-May-11 This document is subject to change without notice. THE PRODUCT DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000