1
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
SMD B
19-213AUTD/S3485/TR8
․Package in 8mm tape on 7〞diameter reel.
․Compatible with automatic placement equipment.
․Compatible with infrared and vapor phase reflow solder process.
․Mono-color type.
․Pb-free.
․The product itself will remain within RoHS compliant version.
․Compliance with EU REACH.
․Compliance Halogen Free .(Br <900 ppm ,Cl <900 ppm , Br+Cl < 1500 ppm)
․The 19-213 SMD LED is much smaller than lead frame type components, thus enable smaller board size, higher packing
density, reduced storage space and finally smaller equipment to be obtained.
․Besides, lightweight makes them ideal for miniature applications. etc.
․Backlighting in dashboard and switch.
․Telecommunication: indicator and backlighting in telephone and fax.
․Flat backlight for LCD, switch and symbol.
․General use.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
2
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Chip
Materials Emitted Color Resin Color
InGaN Pure White Yellow Diffused
℃
Parameter Symbol Rating Unit
Reverse Voltage VR 5 V
Forward Current IF 20 mA
Peak Forward Current
(Duty 1/10 @1KHz) IFP 100 mA
Power Dissipation Pd 75 mW
Electrostatic Discharge ESDHBM 150 V
Operating Temperature Topr -40 ~ +85 ℃
Storage Temperature Tstg -40 ~ +90 ℃
Soldering Temperature Tsol Reflow Soldering : 260 ℃ for 10 sec.
Hand Soldering : 350 ℃ for 3 sec.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
3
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
℃
Parameter Symbol Min. Typ. Max. Unit Condition
Luminous
Intensity Iv 850.0 ----- 1200 mcd
IF=20mA
Viewing Angle 2θ1/2 ----- 130 ----- deg
Forward
Voltage VF 2.50 ---- 3.50 V
Reverse
Current IR ----- ----- 50 μA VR=5V
Note:
1.Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage: ±0.1V
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
4
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Bin Code Min. Max. Unit Condition
1 850.0 1000 mcd IF =20mA
2 1000 1200
Bin Code Min. Max. Unit Condition
9 2.50 2.70
V IF =20mA
10 2.70 2.90
11 2.90 3.10
12 3.10 3.30
13 3.30 3.50
Note:
1.Tolerance of Luminous Intensity: ±11%
2. Tolerance of Forward Voltage: ±0.1V
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
5
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Bin Code CIE_x CIE_y Condition
C4
0.244 0.200
IF =20mA
0.244 0.216
0.254 0.230
0.254 0.214
C5
0.244 0.216
0.244 0.2325
0.254 0.2465
0.254 0.230
C6
0.244 0.2325
0.244 0.249
0.254 0.263
0.254 0.2465
C7
0.254 0.214
0.254 0.230
0.264 0.244
0.264 0.228
C8
0.254 0.230
0.254 0.2465
0.264 0.2605
0.264 0.244
C9
0.254 0.2465
0.254 0.2630
0.264 0.277
0.264 0.2605
C10
0.264 0.228
0.264 0.244
0.274 0.258
0.274 0.242
C11
0.264 0.244
0.264 0.2605
0.274 0.2745
0.274 0.258
C12
0.264 0.2605
0.264 0.277
0.274 0.291
0.274 0.2745
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
6
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
C13
0.274 0.258
IF =20mA
0.274 0.242
0.284 0.256
0.284 0.272
C14
0.274 0.2745
0.274 0.258
0.284 0.272
0.284 0.2885
C15
0.274 0.291
0.274 0.2745
0.284 0.2885
0.284 0.305
Notes:
1.The C.I.E. 1931 chromaticity diagram ( Tolerance ±0.01 ).
2.The products are sensitive to static electricity and care must be fully taken when
handling products.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
7
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
8
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
9
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Note: Tolerances unless mentioned ±0.1mm. Unit = mm
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
10
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
‧CPN: Customer’s Product Number
‧P/N: Product Number
‧QTY: Packing Quantity
‧CAT: Luminous Intensity Rank
‧HUE: Chromaticity Coordinates & Dom. Wavelength Rank
‧REF: Forward Voltage Rank
‧LOT No: Lot Number
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
11
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
Note: The tolerances unless mentioned is ±0.1mm ,Unit = mm
Label Desiccant Label
Aluminum moisture-proof bag
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
12
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
1. Over-current-proof
Customer must apply resistors for protection, otherwise slight voltage shift will cause big
current change ( Burn out will happen ).
2. Storage
2.1 Do not open moisture proof bag before the products are ready to use.
2.2 Before opening the package: The LEDs should be kept at 30℃ or less and 90%RH or less.
2.3 After opening the package: The LED's floor life is 1 year under 30℃ or less and 60% RH or less.
If unused LEDs remain, it should be stored in moisture proof packages.
2.4 If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded the
storage time, baking treatment should be performed using the following conditions.
Baking treatment : 60±5℃ for 24 hours.
3. Soldering Condition
3.1 Pb-free solder temperature profile
Pre-heating
150~200°C
60~120sec.
Above 217°C
60~150sec.
260°C Max.
10sec. Max.
6°C/sec.Max.
Above255°C
30sec.Max.
3°C/sec.Max.
3.2 Reflow soldering should not be done more than two times.
3.3 When soldering, do not put stress on the LEDs during heating.
3.4 After soldering, do not warp the circuit board.
4.Soldering Iron
Each terminal is to go to the tip of soldering iron temperature less than 350℃ for 3 seconds within once in less than the
soldering iron capacity 25W. Leave two seconds and more intervals, and do soldering of each terminal. Be careful
because the damage of the product is often started at the time of the hand solder.
5.Repairing
Repair should not be done after the LEDs have been soldered. When repairing is unavoidable, a double-head soldering
iron should be used (as below figure). It should be confirmed beforehand whether the characteristics of the LEDs will or
will not be damaged by repairing.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
13
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
High reliability applications such as military/aerospace, automotive safety/security systems,
and medical equipment may require different product. If you have any concerns, please contact
Everlight before using this product in your application. This specification guarantees the quality
and performance of the product as an individual component. Do not use this product beyond the
specification described in this document.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
DATASHEET
SMD B
19-213AUTD/S3485/TR8
14
Copyright © 2010, Everlight All Rights Reserved. Release Date :Jan.13.2017 Issue No:
DSE-0013652 Rev.3
www.everlight.com
1. EVERLIGHT reserves the right(s) on the adjustment of product material mix for the specification.
2. The product meets EVERLIGHT published specification for a period of twelve (12) months from date of
shipment.
3. The graphs shown in this datasheet are representing typical data only and do not show guaranteed values.
4. When using this product, please observe the absolute maximum ratings and the instructions for using
outlined in these specification sheets. EVERLIGHT assumes no responsibility for any damage resulting from
the use of the product which does not comply with the absolute maximum ratings and the instructions
included in these specification sheets.
5. These specification sheets include materials protected under copyright of EVERLIGHT. Reproduction in any
form is prohibited without obtaining EVERLIGHT’s prior consent.
6. This product is not intended to be used for military, aircraft, automotive, medical, life sustaining or life saving
applications or any other application which can result in human injury or death. Please contact authorized
Everlight sales agent for special application request.
Ver.:3 Release Date:02/11/2017 狀態:Approved(正式發行)
