AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Overview Applications The F862 is constructed of metallized polypropylene film encapsulated with self-extinguishing resin in a box material recognized by UL 94 V-0. The F862 Series is ideal for harsh environmental conditions and meets the demanding Automotive Electronics Council's AEC-Q200 qualification requirements. Typical applications include connection in series with the mains, capacitive power supplies and energy meters, with special emphasis in automotive applications for severe ambient conditions. Benefits * * * * * * * * * * * Approvals: ENEC, UL, cUL, CQC Rated voltage: 310 VAC 50/60 Hz Capacitance range: 0.1 - 4.7 F Lead spacing: 15.0 - 27.5 mm Capacitance tolerance: 20%, 10% Climatic category: 40/110/56, IEC 60068-1 Tape and reel in accordance with IEC 60286-2 RoHS compliant and lead-free terminations Operating temperature range of -40C to +110C 100% screening factory test at 1,900 VDC Qualification based on AEC-Q200 guidelines Click image above for interactive 3D content Open PDF in Adobe Reader for full functionality Part Number System F 862 B C 104 M 310 Z Capacitor Class Series Lead Spacing (mm) Size Code Capacitance Code (pF) Capacitance Tolerance Voltage (VAC) Packaging F = Film X2, Metallized Polypropylene 310 See Ordering Options Table B = 15 D = 22.5 F = 27.5 See Dimension Table First two digits represent significant figures. Third digit specifies number of zeros. K = 10% M = 20% One world. One KEMET (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 1 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Ordering Options Table Lead Spacing Nominal (mm) Type of Leads and Packaging Lead Length (mm) Lead and Packaging Code 4 +2/-0 Z 3.2 +0.3/-0.2 25 +5/-0 H0= 18.5 +/-0.5 ZL32K ALR0L R 4 +2/-0 17 +0/-1 Z ZLH0J 3.2 +0.3/-0.2 25 +5/-0 H0= 18.5 +/-0.5 ZL32K ZLR0L R 4 +2/-0 17 +0/-1 3.2 +0.3/-0.2 Z ZLH0J ZL32K Standard Lead and Packaging Options Pizza Pack 15 Other Lead and Packaging Options Pizza - Short Leads Bulk (Bag) - Max Length Leads Ammo Pack Standard Lead and Packaging Options Pizza Pack Pizza Pack - Long Leads 22.5 Other Lead and Packaging Options Pizza - Short Leads Pizza Pack - Max Length Leads Ammo Pack Standard Lead and Packaging Options 27.5 Pizza Pack Pizza - Long Leads Pizza - Short Leads (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 2 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Dimensions - Millimeters FRONT VIEW SIDE VIEW L B H d 0.5 LL p Size Code BG BK BP BS BY BZ DB DI DJ DO DP DU FC FI FN FS FY p B H L d Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance Nominal Tolerance 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.4 6.0 7.5 8.5 10.0 11.0 12.0 6.0 7.0 8.5 10.0 11.0 13.0 11.0 13.0 14.0 19.0 22.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 12.0 13.5 14.5 16.0 19.0 20.0 14.5 16.0 17.0 18.5 20.0 22.0 20.0 25.0 28.0 29.0 37.0 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 18.0 18.0 18.0 18.0 18.0 18.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum Maximum 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 Note: See Ordering Options Table for lead length (LL/H 0) options. Qualification Automotive grade products meet or exceed the requirements outlined by the Automotive Electronics Council. Details regarding test methods and conditions are referenced in document AEC-Q200, Stress Test Qualification for Passive Components. For additional information regarding the Automotive Electronics Council and AEC-Q200, please visit their website at www.aecouncil.com. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 3 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Performance Characteristics Rated Voltage 310 VAC 50/60 Hz Capacitance Range 0.1 - 4.7 F Capacitance Tolerance 20%, 10% Temperature Range -40C to +110C Climatic Category 40/110/56 Storage time: 24 months from the date marked on the label package Average relative humidity per year 70% RH 85% for 30 days randomly distributed throughout the year Dew is absent Temperature: -40 to 80C (see "Maximum Humidity in Storage Conditions" graph below) Storage Conditions Approvals ENEC, UL, cUL, CQC Maximum Values at +23C Dissipation Factor 1 kHz C 0.1 F C > 0.1 F 0.3% 0.2% The 100% screening factory test is carried out at 1,900 VDC. The voltage level is selected to meet the requirements in applicable equipment standards. All electrical characteristics are checked after the test. It is not permitted to repeat this test as there is a risk of damage to the capacitor. KEMET is not liable in such case for any failures. Test Voltage Between Terminals Minimum Values Between Terminals Insulation Resistance In DC Applications C 0.33 F 30,000 M C > 0.33 F 10,000 M * F Recommended voltage 630 VDC Maximum Humidity in Storage Conditions Relative Humidity (%) 100 90 80 70 60 50 40 30 20 10 0 -40 30 Days Annual Average -20 0 20 40 Temperature (C) 60 80 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 4 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Impedance Graph Z [] 100 10 1 0.1 0.1 F p. 15 1 F p. 27.5 0.01 0.001 0.1 0.33 F p.22.5 1 10 100 F [MHz] Environmental Test Data Test Publication Endurance IEC 60384-14 Vibration IEC 60068-2-6 Test Fc 3 directions at 2 hours each 10 - 55 Hz at 0.75 mm or 98 m/s2 Bump IEC 60068-2-29 Test Eb 1,000 bumps at 390 m/s2 Temperature Cycling JESD22-MethodJA-104 1,000 cycles (-55C to 85C) Note: If 100C or 125C part the 1,000 cycles will be at that temperature rating. Measurement at 24 4 hours after test conclusion. 30 minute maximum dwell time at each temperature extreme. 1 minute maximum transition time. Active Flammability IEC 60384-14 VR + 20 surge pulses at 2.5 kV (pulse every 5 seconds) Passive Flammability IEC 60384-14 IEC 60384-1, IEC 60695-11-5 Needle-flame test Biased Humidity MIL-STD-202 Method 103 1,000 hours 40C/93%RH. Rated voltage. Measurement at 24 2 hours after test conclusion. 85C, 85% RH and 240 VAC, 1,000 hours Capacitance change (C/C): 10% Dissipation factor change (tan ): 5 * 10-3 (at 1 kHz) Insulation resistance Rins or time constant = CR Rins: 50% of initial limit THB Test Procedure 1.25 x VR VAC 50 Hz, once every hour increase to 1,000 VAC for 0.1 second, 1,000 hours at upper rated temperature (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 5 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Approvals Mark Specification File Number EN/IEC 60384-14 CA08.00203 UL 60384-14 and CAN/CSA- E60384-14 E97797 IEC 60384-14 CQC17001166651 CQC17001166767 CQC17001167225 CQC17001167220 CQC17001166886 CQC17001167231 Environmental Compliance All new KEMET EMI capacitors are RoHS compliant and Halogen-Free. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 6 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Table 1 - Ratings & Part Number Reference Capacitance Value (F) Size Code 0.1 0.15 0.22 0.33 0.39 0.47 0.56 0.15 0.22 0.33 0.39 0.47 0.56 0.68 0.82 1.0 1.2 1.0 1.5 2.2 3.3 4.7 Capacitance Value (F) Dimensions in mm Lead Spacing (p) dV/dt (V/s) Part Number 18.0 18.0 18.0 18.0 18.0 18.0 18.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 31.5 31.5 31.5 31.5 31.5 15.0 15.0 15.0 15.0 15.0 15.0 15.0 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 22.5 27.5 27.5 27.5 27.5 27.5 400 400 400 400 400 400 400 200 200 200 200 200 200 200 200 200 200 150 150 150 150 150 F862BK104(1)310(2) F862BK154(1)310(2) F862BP224(1)310(2) F862BS334(1)310(2) F862BS394(1)310(2) F862BY474(1)310(2) F862BZ564(1)310(2) F862DB154(1)310(2) F862DI224(1)310(2) F862DJ334(1)310(2) F862DJ394(1)310(2) F862DO474(1)310(2) F862DO564(1)310(2) F862DP684(1)310(2) F862DP824(1)310(2) F862DU105(1)310(2) F862DU125(1)310(2) F862FC105(1)310(2) F862FI155(1)310(2) F862FN225(1)310(2) F862FS335(1)310(2) F862FY475(1)310(2) L (mm) Lead Spacing (p) dV/dt (V/s) Part Number B H L BK BK BP BS BS BY BZ DB DI DJ DJ DO DO DP DP DU DU FC FI FN FS FY 7.5 7.5 8.5 10.0 10.0 11.0 12.0 6.0 7.0 8.5 8.5 10.0 10.0 11.0 11.0 13.0 13.0 11.0 13.0 14.0 19.0 22.0 13.5 13.5 14.5 16.0 16.0 19.0 20.0 14.5 16.0 17.0 17.0 18.5 18.5 20.0 20.0 22.0 22.0 20.0 25.0 28.0 29.0 37.0 Size Code B (mm) H (mm) (1) M = 20%, K = 10%. (2) Insert lead and packaging code. See Ordering Options Table for available options. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 7 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Soldering Process The implementation of the RoHS directive has resulted in the selection of SnAgCu (SAC) alloys or SnCu alloys as primary solder. This has increased the liquidus temperature from that of 183C for SnPb eutectic alloy to 217 - 221C for the new alloys. As a result, the heat stress to the components, even in wave soldering, has increased considerably due to higher pre-heat and wave temperatures. Polypropylene capacitors are especially sensitive to heat (the melting point of polypropylene is 160 - 170C). Wave soldering can be destructive, especially for mechanically small polypropylene capacitors (with lead spacing of 5 mm to 15 mm), and great care has to be taken during soldering. The recommended solder profiles from KEMET should be used. Please consult KEMET with any questions. In general, the wave soldering curve from IEC Publication 61760-1 Edition 2 serves as a solid guideline for successful soldering. Please see Figure 1. Reflow soldering is not recommended for through-hole film capacitors. Exposing capacitors to a soldering profile in excess of the above the recommended limits may result to degradation or permanent damage to the capacitors. Do not place the polypropylene capacitor through an adhesive curing oven to cure resin for surface mount components. Insert through-hole parts after the curing of surface mount parts. Consult KEMET to discuss the actual temperature profile in the oven, if through-hole components must pass through the adhesive curing process. A maximum two soldering cycles is recommended. Please allow time for the capacitor surface temperature to return to a normal temperature before the second soldering cycle. Manual Soldering Recommendations Wave Soldering Recommendations 300 Following is the recommendation for manual soldering with a soldering iron. 2 +3 seconds maximum 260C 250 First wave 200 Temperature (C) Recommended Soldering Temperature 400 350 Soldering iron bit temperature (C) Second wave 300 Cooling T <150C Preheating 150 ca 2C/second ca 3.5C/second typical T preheat 100 ca 5C/second 115 C max 100 C Typical 250 50 200 0 150 0 40 80 100 120 160 200 240 Time (s) 50 0 0 1 2 3 4 5 6 7 8 Soldering time (seconds) The soldering iron tip temperature should be set at 350C (+10C maximum) with the soldering duration not to exceed more than 3 seconds. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 8 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Soldering Process cont'd Wave Soldering Recommendations cont'd 1. The table indicates the maximum set-up temperature of the soldering process Figure 1. Dielectric Film Material Maximum Preheat Temperature Maximum Peak Soldering Temperature Capacitor Capacitor Capacitor Capacitor Capacitor Pitch Pitch Pitch Pitch Pitch 10 mm = 15 mm > 15 mm 15 mm > 15 mm Polyester 130C 130C 130C 270C 270C Polypropylene 100C 110C 130C 260C 270C Paper 130C 130C 140C 270C 270C Polyphenylene Sulphide 150C 150C 160C 270C 270C 2. The maximum temperature measured inside the capacitor: Set the temperature so that inside the element the maximum temperature is below the limit: Dielectric Film Material Maximum temperature measured inside the element Polyester 160C Polypropylene 110C Paper 160C Polyphenylene sulphide 160C Temperature monitored inside the capacitor. Selective Soldering Recommendations Selective dip soldering is a variation of reflow soldering. In this method, the printed circuit board with through-hole components to be soldered is preheated and transported over the solder bath as in normal flow soldering without touching the solder. When the board is over the bath, it is stopped and pre-designed solder pots are lifted from the bath with molten solder only at the places of the selected components, and pressed against the lower surface of the board to solder the components. The temperature profile for selective soldering is similar to the double wave flow soldering outlined in this document, however, instead of two baths, there is only one bath with a time from 3 to 10 seconds. In selective soldering, the risk of overheating is greater than in double wave flow soldering, and great care must be taken so that the parts are not overheated. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 9 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Construction Molded Plastic Case Single-sided Metallized Polypropylene Film (First Layer) Detailed Cross Section Molded Plastic Case Self-Extinguishing Resin Single-sided Metallized Polypropylene Film (Second Layer) Margin Margin Metal Contact Layer Metal Contact Layer Margin FILM WINDING SCHEME OPTIONS Leads Single-sided Metallized Polypropylene Film Double-sided Winding Scheme Single-sided Metallized Polypropylene Film 1 Section Single-sided Metallized Polypropylene Film 2 Sections Single-sided Metallized Polypropylene Film 3 Sections Double-sided Metallized Polyester Carrier Film Polyprop Film Diel 1 Section Single-sided Metallized Polypropylene Film 4 Sections (c) KEMET Electronics Corporation SC 29606 * 864-963-6300 * www.kemet.com Metallized Impregnated Paper* P.O. Box 5928 * Greenville, Metallized Polyphenylene Sulfide Film (SMR) Double-sided Metallized Polyester Carrier Film Polypropy Film Diele 3 Sections F3092_F862_X2_310 * 10/2/2017 10 Polyp Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Marking FRONT TOP Approval Marks Passive Flammability Class Series & Safety Class Rated Voltage KEMET or KEC Manufacturing Date Code Capacitance Capacitance Tolerance Passive Flammability Category: B for volume 1750 mm3 C for volume < 1750 mm3 IEC Climatic Category Packaging Quantities Size Code BG BK BP BS BY BZ DB DI DJ DO DP DU FC FI FN FS FY Lead Spacing Thickness (mm) Height (mm) Length (mm) Bulk Bulk Short Leads Long Leads 15 6 7.5 8.5 10 11 12 12 13.5 14.5 16 19 20 18 18 18 18 18 18 1750 1000 1000 750 450 350 22.5 6 7 8.5 10 11 13 14.5 16 17 18.5 20 22 26 26 26 26 26 26 805 700 450 360 300 230 27.5 11.0 13.0 14.0 19.0 22.0 20.0 25.0 28.0 29.0 37.0 31.5 31.5 31.5 31.5 31.5 (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com Ammo Pizza 1000 800 650 550 400 300 680 500 440 380 340 330 935 748 663 561 510 459 450 450 350 350 200 150 464 380 280 235 217 200 660 564 468 396 360 300 300 250 230 170 150 F3092_F862_X2_310 * 10/2/2017 11 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Lead Taping & Packaging (IEC 60286-2) Lead Spacing 5 mm p Lead Spacing 7.5 mm p h H1 W2 F H0 P1 h W2 F W0 W1 W W D0 P1 D0 P0 t Lead Spacing 22.5 - 27.5 mm Lead Spacing 10 - 15 mm p h H1 p h H1 W0 W1 P0 p h W2 F H0 P1 h H0 t p p H1 W0 W1 P0 p h W2 F H0 W0 W1 W D0 P0 P1 h W D0 t t Taping Specification Dimensions in mm Standard IEC 60286-2 Lead spacing +6/-0.1 F 5 7.5 10 15 22.5 27.5 Carrier tape width +1/-0.5 W 18 18 18 18 18 18 Minimum W0 6 6 9 10 10 10 Position of sprocket hole 0.5 W1 9 9 9 9 9 9 9+0.75/-0.5 Distance between tapes Maximum W2 3 3 3 3 3 3 3 Sprocket hole diameter 0.2 D0 4 4 4 4 4 4 4 Hold-down tape width 18 12.7 12.7 12.7 12.7 12.7 12.7 12.7 0.7 P1 3.85 3.75 7.7 5.2 7.8 5.3 P1 Maximum p 1.3 1.3 1.3 1.3 1.3 1.3 1.3 2 h 2 2 2 2 2 2 2 Total thickness 0.2 t 0.7 0.7 0.7 0.7 0.9MAX 0.9MAX 0.9MAX Sprocket hole/cap body 0.5 H0 Feed hole lead spacing Distance lead - feed hole Deviation tape - plane Lateral deviation 0.2 (1) P0 F +1/-0.5 (3) (2) 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18.5 +/-0.5 18+2/-0 (1) Maximum cumulative feed hole error, 1 mm per 20 parts. (2) 16.5 mm available on request. (3) 15 mm available on request (F 10 mm). (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 12 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) Lead Taping & Packaging (IEC 60286-2) cont'd Ammo Specifications Dimensions (mm) Series R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx PHExxx, PMExxx, PMRxxx H W T 360 340 59 330 330 50 H T Reel Specifications W Dimensions (mm) Series D H W R4x, R4x+R, R7x, RSB F5A, F5B, F5D F6xx, F8xx 355 500 30 25 55 (maximum) PHExxx, PMExxx, PMRxxx 360 500 30 46 (maximum) D Manufacturing Date Code (IEC-60062) H W Y = Year, Z = Month Year 2000 2001 2002 2003 2004 2005 2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018 2019 2020 Code M N P R S T U V W X A B C D E F H J K L M Month January February March April May June July August September October November December Code 1 2 3 4 5 6 7 8 9 O N D (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 13 Film Capacitors - AC Line EMI Suppression and RC Networks F862 Metallized Polypropylene Film for Harsh Environmental Conditions, Class X2, 310 VAC (Automotive Grade) KEMET Electronics Corporation Sales Offices For a complete list of our global sales offices, please visit www.kemet.com/sales. Disclaimer All product specifications, statements, information and data (collectively, the "Information") in this datasheet are subject to change. The customer is responsible for checking and verifying the extent to which the Information contained in this publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without guarantee, warranty, or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on KEMET Electronics Corporation's ("KEMET") knowledge of typical operating conditions for such applications, but are not intended to constitute - and KEMET specifically disclaims - any warranty concerning suitability for a specific customer application or use. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET's products is given gratis, and KEMET assumes no obligation or liability for the advice given or results obtained. Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other measures may not be required. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * P.O. Box 5928 * Greenville, SC 29606 * 864-963-6300 * www.kemet.com F3092_F862_X2_310 * 10/2/2017 14