COMPUTING
High density, cost-effective
10G switch blade design for
AdvancedTCA® platforms
PICMG® 3.0 compliant base
interface switch
PICMG 3.1, Option 1, 9 fabric
interface switch (1G/10G)
Single AMC site
Optional SATA HDD or SSD
Optional Telecom clocking
support
Integrated software package
Designed for NEBS/ETSI
compliance
The ATCA-F125 from Artesyn Embedded Technologies is a high density, cost-effective 10G
switch blade providing the networking infrastructure for Artesyn Centellis® 4410 platforms. This
product is ideal for creating network edge telecom applications with cost sensitive moderate
bandwidth requirements. Combining several ATCA® functions within a single blade design
optimizes slot usage helping end users to reach best Centellis 4410 platform price/performance
ratio values.
Optional functions include telecom clock generation and distribution, SATA based drive devices
(HDD or SSD) and an AdvancedMC™ (AMC) site for general processing and/or packet
processing functions.
Different conguration options allow for maximum external I/O via 1G and 10G Ethernet
interfaces at the front panel and/or at the optional Rear Transition Module.
A powerful on-board service processor executes all L2 and L3 switch functions, blade setup
and hardware platform management functions independent of any processor AMC and/or
SATA drive installed. This allows full, 100% utilization of the AMC based processor for end-user
applications.
Data Sheet
ATCA-F125
10G AdvancedTCA Switch Blade
ATCA-F125 Data Sheet
Hardware
SERVICE PROCESSOR
NXP® QorIQ® P2020, dual-core processor, 1.0 GHz
MEMORY
Up to 4GB ECC-protected SDRAM, via (2) DDR3 memory
DIMMs
• Factory default – 2GB
64MB boot ash (NOR), dual-bank architecture
2GB application ash (NAND), via eUSB
16MB CPU reset-persistent memory
COUNTERS/TIMERS
Four (4) 32-bit programmable timer/counters
Watchdog timer
BASE AND FABRIC INTERFACES
Dual star conguration
PICMG 3.0 base interface switching – Gigabit Ethernet
(1.0Gbps)
PICMG 3.1, Option 1, 9 fabric interface – Gigabit Ethernet
(1.0Gbps, 10Gbps)
AMC SITE
Single AMC slot
Mid-size AMC (AMC.0, AMC.1, AMC.2 and AMC.3 compliant)
STORAGE BAY
Single hard drive device (HDD) bay
Direct mount installation
Standard SATA interface
• Default conguration – P2020 service processor via SATA
bridge
• Optional conguration – connection to AMC, port 2
FRONT PANEL INTERFACES
Service processor
• 1G Ethernet, RJ-45
• RS-232 serial, RJ-45
• USB 2.0
Base interface
• 2x 10G Ethernet, SFPP
Fabric interface
• 2x 10G Ethernet, SFPP
Telecom clock interfaces
• 5x Inter-shelf interfaces, RJ-45
• 1x Master/Slave interface, RJ-45
2x BITS/SSU interfaces, RJ-45
REAR TRANSITION MODULE (RTM)
RTM-ATCA-F125
Base interface
• 2x 10G Ethernet, SFPP
• 4x 1G Ethernet, SFP
Fabric interface
• 6x 10G Ethernet, SFPP
BLADE DIMENSIONS
8U form factor, 280 mm x 322.5 mm, single slot
RELEVANT STANDARDS
PICMG 3.0 (form factor, IPMI, base interface, hot swap, RTM)
PICMG 3.1, Options 1 and 9
Telcordia GR-1244-CORE [5] (if equipped with Telecom Clock
function)
ANSI T1.101 [9] (if equipped with Telecom Clock function)
POWER CHARACTERISTICS
Dual redundant -48V rails
Input range: -40 VDC to -72 VDC
Power draw (typical)
• ATCA-F125-14S: 80 watts
• RTM-ATCA-F125: 20 watts
OPERATING ENVIRONMENT
Operating temperature range: -5 °C to +55 °C @
90% non-condensing humidity
Storage temperature range: -40 °C to +70 °C @
95% relative humidity
ATCA-F125 Data Sheet
Telecom Clock Characteristics
(if equipped)
TELECOM CLOCK CHIP
Semtech Topsync ACS9510
SUPPORTED CONFIGURATIONS
Input: BITS/SSU / Output: Backplane CLK 1/2
Input: Backplane CLK 3 / Output: Backplane
CLK 1/2
Input: Backplane CLK 3 / Output: BITS/SSU
TIMING REFERENCE
Traditional signal-based reference as dened by Telcordia
GR-1244-CORE [5]
PERFORMANCE
Stratum 3
SRstackware® Software
Linux-based L2 and L3 switch management software providing
a rich selection of features and protocols, e.g.
• STP/RSTP/MSTP
• VLAN, VLAN stacking (Q-in-Q)
• LACP
• Flow Control
• Class of Service
• GARP/GMRP/GVRP
• SNMPv2, SNMPv3
• ACL
• IGMP v1/v2/v3, IGMP snooping/proxy
• RIPv2, RIPng
• OSPFv2
• VRRP
Multi-shelf capable Service Availability Forum™ Hardware
Platform Interface (HPI) support
Regulatory Compliance
Designed to comply with NEBS
Telcordia GR-63-CORE, NEBS Physical Protection, Level 3
Telcordia GR-1089-CORE, Electromagnetic Compatibility and Electrical Safety — Generic Criteria for Network
Telecommunications Equipment. Level 3, Equipment Type 2
Designed to comply with ETSI
ETSI Storage, ETS 300 019-2-1, Class 1.2 equipment, Weatherprotected, not Temperature Controlled Storage
Locations
ETSI Transportation, ETS 300 019-1-2, Class 2.3 equipment, Public Transportation
ETSI Operation, ETS 300 019-1-3, Class 3.1(E) equipment, Partly Temperature Controlled Locations
ETSI EN 300-132-2 Environmental Engineering (EE); Power supply interface at the input to telecommunications
equipment; Part 2: Operated by direct current (dc)
ETS-300-753, Equipment Engineering (EE); Acoustic noise emitted by telecommunications equipment
EMC
ETSI EN 300 386 Electromagnetic compatibility and Radio spectrum Matters (ERM); telecommunication network
equipment; ElectroMagnetic Compatibility (EMC) requirements, Telecommunication equipment room (attended)
FCC 47 CFR Part 15 Subpart B (US), Class A
ECISPR 22, Limits and Methods of Measurement of Radio Disturbance Characteristics of Information Technology
Equipment
AS/NZS CISPR 22 (Australia/New Zealand), Limits and Methods of Measurement of Radio Disturbance Characteristics
of Information Technology Equipment
VCCI Class A (Japan), Voluntary Control Council for Interference by Information Technology Equipment
Industry Canada ICES-003 Class A
Safety
Compliance to UL/CSA 60950-1, EN 60950-1 and IEC 60950-1 CB Scheme. Marked with U.S. NRTL, Canadian Safety
and CE Mark.
RoHS compliance
DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on the restriction of the use of
certain hazardous substances in electrical and electronic equipment (RoHS)
DIRECTIVE 2002/96/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL on waste electrical and electronic
equipment
Directive 2011/65/EU OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 8 June 2011 on the restriction of
the use of certain hazardous substances in electrical and electronic equipment.
CE Conformity Directive 2004/108/EC, Directive 2006/95/EC
www.artesyn.com
WORLDWIDE OFFICES
United States +1 888 412 7832 Japan +81 3 5403 2730
Hong Kong +852 2176 3540 Korea +82 2 6004 3268
China +86 400 8888 183
AArtesyn Embedded Technologies, Artesyn, the Artesyn Embedded Technologies logo and Centellis are trademarks
and service marks of Artesyn Embedded Technologies, Inc. Centellis® is registered in one or more countries. PICMG,
AdvancedMC, AdvancedTCA, ATCA and the AdvancedTCA logo are trademarks of PICMG. Service Availability is a
proprietary trademark used under license. Intel, Core and Xeon are trademarks of Intel Corporation or its subsidiaries
in the Unites States and other countries. NXP and QorIQ are trademarks of NXP B.V. All other names and logos
referred to are trade names, trademarks, or registered trademarks of their respective owners. Specifications are subject
to change without notice. © 2017 Artesyn Embedded Technologies, Inc. All rights reserved. For full legal terms and
conditions, please visit www.artesyn.com/legal.
ATCA-F125 Data Sheet
ATCA-F125-DS 27Nov2017
SOLUTION SERVICES
Artesyn Embedded Technologies provides a portfolio of solution services optimized to meet your needs throughout the product lifecycle. Design services help
speed time-to-market. Deployment services include global 24x7 technical support. Renewal services enable product longevity and technology refresh.
Ordering Information
Part Number Description
Switch Blade Products
ATCA-F125-14S 10G ATCA hub blade, one AMC slot, and optional storage
ATCA-F125-TCLK3 10G ATCA hub blade, one AMC slot, optional storage, telecom clock Stratum 3
Optional Switch Blade Products
RTM-ATCA-F125 RTM for the ATCA-F125 with SFP & SFPP receptacles
SFP-MM-SX-LC 1G single form factor (SFP) module - 850NM, SX, LC connector
SFP-CO-RJ-45 1G copper single form factor (SFP) module - RJ-45 connector
SFPP-MM-SR-LC 10G single form factor plus (SFPP) module - 850NM, SR, LC connector
SFPP-SM-LR-LC 10G single form factor plus (SFPP) module - 1310NM, LR, LC connector
SFPP-CO-RJ-45-3M 10G copper single form factor plus (SFPP) modules with molded cable (3M)
CABLE-OPT-F102-5M Optical cable for multi-mode, SFP and SFPP connections (5M)
PRAMC-7311 AMC with Intel® Core™ i7 processor, 4GB DDR3, mid-size
SW-WR-PRAMC-7311 CD with Wind River PNE 3.0 and Basic Blade Services for the PrAMC-7311, single blade license
PRAMC-7311-16GB AMC with Intel® Core™ i7 processor, 16GB DDR3, mid-size
HDD-1T-SATA Direct mount 1000 GB HDD for ATCA-F125 & ATCA-F140, Enhanced Availability – SATA
SSD-480G-SATA-F140-1 480GB MLC Solid State Disk with mounting kit
SSD-960G-SATA-F140-1 960GB MLC 2.5 inch SSD with mounting kit for ATCA-F125 and ATCA-F140