API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
High current filters are ideal for use in high current
5 volt logic buss, but also can be used for ±48 VDC
telephone rack buss, high current switch mode power
supplies and DC charging systems. High voltage filters
find use in high voltage power supplies and applications
requiring U.L. Hi-Pot.
Features
■
Current ratings up to 100 Amps
■
Continuous voltage ratings up to
1250 VDC/240 VAC (400Hz)
■
U.L. 1459 recognized and CSA C22.2 approved
versions available
■
Rugged bolt-in style for easy installation
Typ.
.
.815
(
Hex.
.563
(
.060 Max., Typ.
1-1/2 Imperfect Thds.
.250
(6.35)
Min. .250
(6.35)
.250
(6.35)
.250
(6.35)
Min.
.500
(12.7)
Hex.
ø .062 ± .005
(1.58 ± .13)
Typ.
5/16–24 Unf–2A Thd.
.250
(6.35)
Figure 3
Dimensions in inches (mm)
High Current/High Voltage
Resin Sealed Filters
LP24
Installation Notes
for Figure 1 & 2 — see below (Figure 3 see page CF6)
1. Mounting installation torque
Method A: Mounting in full threaded through-hole
Maximum torque: 96 in-lbs
Method B: Mounting w/hardware
Maximum torque: 84 in-lbs
2. Terminal installation torque
Maximum torque: 20 in-lbs
Note: Use two-wrench method to install
terminal hardware
API TECHNOLOGIES • 8061 Avonia Rd. • Fairview, PA 16415 • Ph: 814-474-1571 • Fax: 814-474-3110 • eis.apitech.com
API TECHNOLOGIES’ SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58
High Current/High Voltage
Resin Sealed Filters
.375
(9.53)
1.250 ± .031
(31.8 ± .79)
.312
(7.93)
1.000 ± .031
(25.4 ± .79)
.250 Flats
.578 Max.
(14.68 Max.)
.327 Max.
(8.30 Max.)
Mounting Surface
ø .051 ± .005
(ø 1.30 ± .13)
5/16–24 Unf–2A
Figure 4
.500
(12.7)
.937 ± .031
(23.8 ± 79)
.325
(8.26)
.075
(1.91)
.689 ± .031
(17.5 ± .79)
ø .057 ± .005
(ø 1.45 ± .13)
Mounting Surface
3/8–32unef–2A Thd.
Figure 5
.990 ± .031
(25.15 ± .79)
.020
(.51)
.375
(9.53)
.125
(3.18)
.740 ± .031
(18.61 ± .79)
3/8–32 Unef–2A Thd.
.500
(12.70)
Figure 6
30
30
30
30
—
7
—
—
—
—
40
40
40
40
12
20
—
10
6
5
50
50
50
50
20
25
10
22
20
15
50
50
50
50
30
35
20
32
30
50
50
50
50
50
33
40
28
35
35
50
Minimum Insertion Loss (dB)
60
60
200
200
600
600
750
750
1250
2500
Rated Voltage
125°C I
Amp
Min
Cap
10
MHz
Part Number
✝Also available through API’s authorized distributors.
€Also available through API’s authorized European distributors/agents.
*Denotes parts that are UL recognized to UL 60950 and certified to CSA C22.2
** Denotes parts that meet 1500 VAC Dielectric Withstanding Voltage per UL 1283 and CSA C22.2
*** AC Voltage to be 400Hz
54-848-005*
54-853-001*
54-853-004 €
54-848-008
54-844-001**
54-844-002**
54-763-008
54-763-009
54-789-003
✝1280-060 €
Figure
DC
30
MHz
100
MHz
300
MHz
1
GHz
10
GHz
3
MHz
1
2
2
1
3
3
4
4
5
6
50
50
100
100
25
25
25
25
25
25
0.22 µF
0.22 µF
0.22 µF
0.22 µF
4700 pF ± 20%
0.01 µF ± 20%
1000 pF
4000 pF
4000 pF
1500 pF
50
50
50
50
50
57
28
35
35
50
50
50
50
50
50
57
28
40
35
50
—
—
140
140
240
240
—
—
—
—
AC***
20
20
20
20
—
3
—
—
—
—
1
MHz
CKT
C
C
C
C
C
C
C
C
C
Pi
High Current High Voltage Feed-through
Dimensions in inches (mm)
LP25
