REV. 6/3/05 j- .605 [15.37] MAX. ~| ( 105 [2.67] ) - STEWART PATENTED | CISTI ( .045 [1.14] ) K1 KEYWAY a0 fas}_~| LT T g 5 So "3 + 6+ & 12345678410 + & & -- .700 [17.78] MAX. 9.035 [0.89] +.003 [0.08] (10) 006 [0.15] 2S, = g2 <= os iy + 1 a a = rs 8 w it 1 | | | 100 [2.54] (4) > .050 [1.27] (9) a, > 8s an a PIN #1 } 128 [3.25] y ; 7125 [3.18] (2) 450 [11.43] '.006 [0.15]| P.C.B. RECOMMENDED HOLE LAYOUT SEEN FROM COMPONENT SIDE et ALL CENTERLINE DIMENSIONS ARE BASIC. Q DATE REV ECN APP'D. BY 1/30/06 Al 7455 JM NOTES: 1. jw CONNECTOR MATERIALS: HOUSING: THERMOPLASTIC UL94 V-0 CONTACTS/SHIELD: COPPER ALLOY SHIELD PLATING: NICKEL OR TIN CONTACT PLATING: SELECTIVE GOLD IN CONTACT AREA SEE CHART FOR PART NUMBER . FOR PRODUCT SPECIFICATIONS SEE PRO22-01. . TOLERANCES COMPLY WITH F.C.C. DIMENSION REQUIREMENTS. . THE SUGGESTED PANEL OPENING IS INTENDED 10 GIVE USER THE ABILITY TO HAVE REASONABLE JACK/PANEL CLEARANCES, YET MAINTAIN GROUNDING CAPABILITY. THESE VARIABLES CAN BE ADJUSTED IN EITHER DIRECTION BUT MAY CARRY SOME CONSEQUENCES IN THE FORM OF LOWER MATING FORCES OR TIGHTER ASSEMBLY TOLERANCES. 30 MICRO-INCHES [0.76um] SS641010NF-K1-A111 CONTACT PLATING IN MATING AREA PART NUMBER THIRD ANGLE PROJECTION @ = Bel Stewart Connector 11118 Susquehanna Trail South Glen Rock, PA 17327-9199 (717) 235-7512 Fax: (717) 235-7954 http: //www.stewartconnector.com DO NOT SCALE DRAWING DRAWING IS SUBJECT TO CHANGE WITHOUT NOTICE TEN CONTACT, TEN POSITION, UNSHIELDED SHORT VERSION JACK NON-FLANGED, K1 KEYING OPTION DIMENSIONS: INCHES [METRIC] THIS DRAWING AND THE SUBJECT MATTER SHOWN THEREON | DRN BY: TRM TE 9-11-03 UNLESS OTHERWISE SPECIFIED ARE CONFIDENTIAL AND THE PROPRIETARY PROPERTY OF TOLERANCES ARE +.005 [0.13] | BEL STEWART CONNECTOR AND SHALL NOT BE REPRODUCED, | APPD BY: RCC TE 9-26-03 ANGLES ARE + 1 COPIED, OR USED IN ANY MANNER WITHOUT PRIOR WRITTEN SHEET NO. CONSENT OF BEL STEWART CONNECTOR. THE SUBJECT | DWG NO. REV. 1 OF 1 MATTER MAY BE PATENTED OR A PATENT MAY BE PENDING. C1640312 Al 1 AutoCAD