FEF (Snap) Fuse holder https://www.schurter.com /PG02 Shock-Safe Fuseholder, 5 x 20 mm, Slotted Cap/Fingergrip, Snap Stepless, 0.75 - 3.0 mm Slotted cap Fingergrip See below: 250 VAC * 3.2 W / 10 A (VDE)10 A (UL/CSA) Approvals and Compliances Description Weblinks - Panel Thickness 0.75 - 3.0 mm, Snap stepless pdf datasheet, html-datasheet, General Product Information, Packaging details, Distributor-Stock-Check, Detailed request for product, Microsite Technical Data Shock-Safe Category Fuse-Link Mounting Attachment Terminal Rated Voltage Rated current Rated Power Acceptance IEC Degree of Protection Admissible Ambient Air Temp. Climatic Category Material: Socket Material: Cap Material: Terminals Unit Weight Storage Conditions Product Marking PC2 5 x 20 mm Panel mount, Front Side Snap-in Solder 250 VAC 10 A (VDE), 10 A (UL/CSA) 3.2 W / 10 A @ Ta 23 C IP 40 -40 C to 85 C 40/085/21 acc. to IEC 60068-1 Thermoplastic, black, UL 94V-0 Thermoplastic, black, UL 94V-0 Tin-Plated Copper Alloy 6.45 g 0 C to 60 C, max. 70% r.h. , Type, Rated Voltage, Rated current, Power Rating, Certification marks Soldering Methods Solderability Resistance to Soldering Heat Contact Resistance Dielectric Strength Impulse Withstand Voltage Insulation Resistance Overvoltage Category Pollution Degree Resistance to Vibration Panel Thickness Iron Soldering Profile 350 C / 3 sec acc. to IEC 60068-2-20, Test Ta, method 2 350 C / 10 sec acc. to IEC 60068-2-20, Test Tb, method 2 10 m at 20 mV acc. to IEC 60127-6 > 3 kV between life parts (50 Hz: 1 min) > 4 kV between life parts 10 M between life parts (500 VDC: 1 min) III acc. to IEC 60664-1 2 acc. to IEC 60664-1 acc. to IEC 60068-2-6, test Fc 0.75 - 3.0 mm Approvals and Compliances Detailed information on product approvals, code requirements, usage instructions and detailed test conditions can be looked up in Details about Approvals Approvals The approval mark is used by the testing authorities to certify compliance with the safety requirements placed on electronic products. Approval Reference Type: FEF Approval Logo Certificates Certification Body Description VDE Approvals VDE VDE Certificate Number: 40046093 UL Approvals UL UL File Number: E39328 Design Standard Description Designed according to IEC 60127-6 Miniature fuses. Part 6. Fuse-holders for miniature fuse-links Designed according to UL 4248-1 Fuseholder general requirements Designed according to CSA C22.2 no. 4248.1 Fuseholder general requirements Product standards Product standards that are referenced Organization Application standards Fuses 1 FEF (Snap) Fuse holder https://www.schurter.com /PG02 Application standards where the product can be used Organization Design Standard Description Designed for applications acc. IEC/UL 60950 IEC 60950-1 includes the basic requirements for the safety of information technology equipment. Designed for applications acc. IEC 60335-1 Safety of electrical appliances for household and similar purposes. Meets the requirements for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Details Initiator Description CE declaration of conformity SCHURTER AG The CE marking declares that the product complies with the applicable requirements laid down in the harmonisation of Community legislation on its affixing in accordance with EU Regulation 765/2008. RoHS SCHURTER AG EU Directive RoHS 2011/65/EU China RoHS SCHURTER AG The law SJ / T 11363-2006 (China RoHS) has been in force since 1 March 2007. It is similar to the EU directive RoHS. REACH SCHURTER AG On 1 June 2007, Regulation (EC) No 1907/2006 on the Registration, Evaluation, Authorization and Restriction of Chemicals 1 (abbreviated as "REACH") entered into force. White paper Glow wire test SCHURTER AG Meets the requirements of IEC 60335-1 for appliances in unattended use. This includes the enhanced requirements of glow wire tests acc. to IEC 60695-2-12 and -13. Compliances The product complies with following Guide Lines Identification Dimension [mm] 33 mm S o 15 1.8 o 15 S 4 4 0.5 0.5 6 33 33 38 Variant 0031.1091 und 0031.1095 Variant Fingergrip 0031.1901 and 0031.1902 S o 15 38 8 4 2. 6 5x 0. 5x 2. 8 4 38 0. 1.8 o 15 S 42.5 Variant 0031.1161 und 0031.1165 2 Variant Fingergrip 0031.1913 and 0031.1914 Fuses FEF (Snap) Fuse holder https://www.schurter.com /PG02 0 0 13.6 0 12.7 -0.1 13 -0.3 0 13 -0.3 12 -0.1 2.4 Mounting Holes. For 0031.1161 / 0031.1165 / 0031.1913 / 0031.1914 Mounting Holes. For 0031.1091 / 0031.1095 / 0031.1901 / 0031.1902 Derating Curves Admissible Power Acceptance in Watt 4.0 3.5 3.0 I = 1.0 In 2.5 2.0 I = 0.7 In 1.5 I = << In 1.0 0.5 0.0 0 20 40 60 80 100 Ambient Air Temperature Ta C All Variants Holder Cap Panel Thickness s [mm] Terminal Cut shape Degree of Protection Order Number 1 slotted 0.75 - 1.5mm Solder 1) IP 40 0031.1091 1 slotted 1.8 - 3.0mm Solder 1) IP 40 0031.1095 1 Fingergrip 0.75 - 1.5mm Solder 1) IP 40 0031.1901 1 Fingergrip 1.8 - 3.0mm Solder 1) IP 40 0031.1902 1 slotted 0.75 - 1.5mm Solder 2) IP 40 0031.1161 1 slotted 1.8 - 3.0mm Solder 2) IP 40 0031.1165 1 Fingergrip 0.75 - 1.5mm Solder 2) IP 40 0031.1913 1 Fingergrip 1.8 - 3.0mm Solder 2) IP 40 0031.1914 Most Popular. Availability for all products can be searched real-time:https://www.schurter.com/en/Stock-Check/Stock-Check-SCHURTER 1) With Notch 2) With D-Form Quick-Connect Terminals on Request Bulk (100 pcs.) 08.10.2018 Packaging Unit The specifications, descriptions and illustrations indicated in this document are based on current information. All content is subject to modifications and amendments. Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability and test each product selected for their own applications. Fuses 3 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Schurter: 0031.1913 0031.1901 0031.1161 0031.1165 0031.1092 0031.1095 0031.1091 0031.1352