B1-6 APEM www.apem.com
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications
B1
❑ Momentary pushbuttons for thick panels
❑ Illuminated or non-illuminated
❑ Tactile feedback
❑ Flat round actuator for optional marking
❑ Sealed to IP67 (standard models only)
ENVIRONMENTAL SPECIFICATIONS
• Front panel sealing according to IEC 60529 : IP67 (standard models)
IP54 (options X1242 and 234)
• Shock resistance : 100 g according to IEC 512-4, test 6c
• Vibration resistance : 10-500 Hz - 10 g according to IEC 512-4, test 6d
• Salt spray : IEC 512-6, test 11f
• Operating temperature : -40°C to +85°C
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load :
2A 24VDC, 200.000 cycles
• Initial contact resistance : 50 mΩ max.
• Insulation resistance : 1 GΩ min. at 500VDC
• Dielectric strength : 1.000 Vrms MATERIALS
• Case : thermoplastic UL94-V0
• Actuator : polyamide 6/6
• Bushing/bezel : polyamide 6/6
• Contacts : silver, gold plated
• Terminal seal : epoxy
GENERAL SPECIFICATIONS
• Panel thickness : 1,50 mm (.059) min.
10 mm (.393) max
.
• Total travel :
1,7 mm (.067) +/- 0,3 mm
• Typical operating force : 4N +/- 2N
• Low level or mechanical life :
1.000.000 cycles
• Torque (applied to nut) : 1 Nm max.
with metal nut U166
1,5 Nm max. with plastic nut U4248
• Soldering : 300°C max. for
3 seconds
MOUNTING - STANDARD BEZEL
Panel cut-out Matrix mounting
Back of panel space requirement
1.50min-10.00Max
(.059MIN.-.393MAX.)
1
(.531DIA)
Ø13.50
ECH1
Ø13.60
CILPE
(.535DIA)
12.90
(.507)
CILPE
(.787)
20.00
20.00
(.787) (.787)
20.00
16.40
(.645)
le 15/11/2011
1.50min-10.00Max
(.059MIN.-.393MAX.)
1
(.531DIA)
Ø13.50
ECH1
Ø13.60
CILPE
(.535DIA)
12.90
(.507)
CILPE
(.787)
20.00
20.00
(.787) (.787)
20.00
16.40
(.645)
le 15/11/2011
➀ Flat seal
A resistor must be series-connected by the user.
Resistor value = supply voltage - LED forward voltage
LED forward current
LED COMPONENT SPECIFICATIONS
LED colour
Forward current
Super red (L0S) 20mA
20mA
20mA
20mA
Typ. forward voltage Max. forward voltage
2,1V
2,1V
2,1V
3,2V
Yellow (L0Y)
Green (L0G)
Blue (L0B)
20mA 3,35V
2,3V
2,3V
2,3V
3,8V
4,25VWhite (L0W)
Mounting for reduced bezel : see options X1242 and 234 at the end of the series.
The company reserves the right to change specifications without notice.
UG1410-A-R2
APEM www.apem.com B1-7
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Overview
B1
IL
Actuator shape
RRound, curved
PRound, flat
Terminals
FFlying leads
PStraight PC
SSolder lugs
Electrical function
3Normally open
(NO)
Actuator colour
1Blue
2Black
3Green
4Grey
5Yellow
6Red
7/1 White
8Bright chrome
9Orange
ASatin chrome
BDark blue
Contacts
AD Silver, gold
plated
ABOUT THIS SERIES
On the following pages, you will find successively :
- model structure of switches and options in the same order as in above chart
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
A sealing boot is available to protect the switches against frost and sand (P/N U5125).
It is presented after the IA series and in section H.
Mounting accessories : Standard hardware supplied : 1 flat seal (standard bezel) or 1 O-ring (reduced bezel) and 1 metal hex
nut 14 mm (.551) across flats. Hex nut part number U166.
Plastic nut 17 mm (.669) across flats, thickness 4 mm (.157) available on request. Part number U4248.
Packaging unit : 25 pieces
NOTICE : please note that not all combinations of above numbers are available.
Refer to the following pages for further information.
SERIES
LED colour
Blank Non-illum.
L0S Super red
L0Y Yellow
L0G Green
L0B Blue
L0W White
Options
X1242 Reduced bezel,
frontal mounting
234 Reduced bezel,
standard mounting
Compact custom switches:
see end of the series.
B1-8 APEM www.apem.com
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Illuminated
B1
Function 3 (NO)
Solder lug terminals
CILR3SLDT
10.80
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
(.047)
1.50
(.059)
(.204)
(.015)
5.20
(.200)
(.078)
2.00 5.08
EPOXY
0.40
(.425)
(.759)
1.20
19.30 5.00
(.196)
(.078)
2.00
6.10
(.240)
Ech 0.9
CILR3SLDT
LE 16/11/2011
(.472DIAx0.75IS)
Ø12.00x0.75SI
MODEL
STRUCTURE
• Curved or flat actuator
• Antirotation bushing
Curved actuator
ILR3SAD Normally open
Flat actuator
ILP3SAD Normally open
➞Flat
ACTUATOR COLOUR
1: blue - 2: black - 3: green - 4: grey - 5: yellow - 6: red - 7/1 : white - 8: bright chrome - 9: orange
A: satin chrome - B: dark blue
L0S : red - L0Y : yellow - L0G : green - L0B : blue - L0W : white
LED COLOUR
ECH0.9
CILLFCT
LE 15-11-2011
Flying lead terminals
CILR3FLDT
10.80
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
(.425)
(1.063 MAX.)
27.00 Max. 5.00
(.196)
(.078)
2.00
Ech 0.9
CILR3FLDT
LE 16/11/2011
(.374DIA)
Ø9.50
500±10
19.68±.393)
(.472DIAx0.75IS)
Ø12.00x0.75SI
Curved actuator
ILR3FAD Normally open
Flat actuator
ILP3FAD Normally open
➞Flat
Actuator marking available on ILP models (symbol 10 mm max.). On request.
Also available with straight PC terminals : IL•3PAD
5.20
(.204)
1.00
(.039)
4.55
(.179)
CIPCOSP CIPCOSZ1
1.20
2.80 (.047)
(.110)
8.70
2.40
(.342)
(.094)
Straight P
Wire colours : black : NO contact, red : LED anode(+), blue : LED cathode(-)
APEM www.apem.com B1-9
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Non-illuminated
B1
Solder lug terminals
CILR3SDT
10.80
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
(.047)
1.50
(.059)
(.204)
(.015)
5.20
(.200)
(.078)
2.00 5.08
EPOXY
0.40
(.425)
(.724)
1.20
18.40 5.00
(.196)
(.078)
2.00
Ech 0.9
CILR3SDT
LE 16/11/2011
(.472DIAx0.75IS)
Ø12.00x0.75SI
MODEL
STRUCTURE
• Curved or flat actuator
• Antirotation bushing
Curved actuator
ILR3SAD Normally open
Flat actuator
ILP3SAD Normally open
➞Flat
Flying lead terminals
CILR3FDT
10.80
Ø17.50
(.688DIA)
Ø12.00
(.472DIA)
(.425)
(.826 MAX.)
21.00 Max. 5.00
(.196)
(.078)
2.00
Ech 0.9
CILR3FDT
LE 16/11/2011
(.374DIA)
Ø9.50
500±10
19.68±.393)
(.472DIAx0.75IS)
Ø12.00x0.75SI
Curved actuator
ILR3FAD Normally open
Flat actuator
ILP3FAD Normally open
➞Flat
Actuator marking available on ILP models (symbol 10 mm max.). On request.
Also available with straight PC terminals : IL•3PAD
5.20
(.204)
1.00
(.039)
4.55
(.179)
CIPCOSP CIPCOSZ1
1.20
2.80 (.047)
(.110)
8.70
2.40
(.342)
(.094)
Straight P
ACTUATOR COLOUR
1: blue - 2: black - 3: green - 4: grey - 5: yellow - 6: red - 7/1 : white - 8: bright chrome - 9: orange
A: satin chrome - B: dark blue
Function 3 (NO)
ECH0.9
CILFCT
LE 15-11-2011
B1-10 APEM www.apem.com
IL series
Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Custom switches
B1
Reduced bezel for compact matrix mounting - option X1242
• Dia. 15 (.590) reduced bezel
• Mounting from the front into a threaded panel cut-out
• Matrix mounting : 16 x 16 mm (.630x.630)
• Illuminated or non-illuminated
• Same terminal options and colours as standard models
• Part numbers on request.
ILP3FAD...X1242
Reduced bezel for compact matrix mounting - option 234
• Dia. 15 (.590) reduced bezel
• Standard panel mounting
• Matrix mounting : 17,5 x 17,5 mm (.689x.689)
• Illuminated or non-illuminated
• Same terminal options and colours as standard models
• Part numbers on request.
ILP3SAD...234
MOUNTING - REDUCED MODEL
Panel cut-out Matrix mounting
➁ O-ring
2
0.80min-4.30Max
(.031MIN.-.169MAX.)
1.50min-10.00Max
(.059MIN.-.393MAX.)
(.531DIA)
Ø13.50
ECH1
Ø13.60
(.535DIA)
12.90
(.507)
CIMPE2
(.689)
17.50
17.50
(.689) (.689)
17.50
20
(.787)
le 29/03/2012
Ø15.60
(.614DIA)
CIMPE2
Mouser Electronics
Authorized Distributor
Click to View Pricing, Inventory, Delivery & Lifecycle Information:
Apem:
ILP3SAD2L0Y ILP3FAD2L0W ILR3PAD2L0S ILP3PAD2L0B ILR3FAD2L0G ILP3FAD2 ILP3PAD2L0W
ILR3SAD2 ILR3FAD2 ILR3FAD2L0S ILR3SAD2L0W ILP3FAD2L0B ILP3PAD2L0S ILP3SAD2L0G ILR3SAD2L0G
ILP3FAD2L0G ILP3FAD2L0Y ILR3FAD2L0W ILR3PAD2L0B ILR3SAD2L0Y ILP3SAD2L0B ILR3PAD2L0W
ILR3FAD2L0Y ILR3SAD2L0S ILR3PAD2L0Y ILR3SAD2L0B ILR3PAD2L0G ILP3SAD2 ILP3PAD2 ILP3SAD2L0S
ILP3FAD2L0S ILP3PAD2L0G ILP3SAD2L0W ILR3PAD2 ILP3PAD2L0Y ILR3FAD2L0B
