DC/DC Converters TEN 20WI Series, 20 Watt esign d w e n r d fo mende Features not recom Ultra wide 4 : 1 input range Extended operating temperature range in -40C to +85C I/O isolation 1500 VDC Input filter meets EN 55022, class A and FCC, Level A Remote On/Off Adjustable output Industry standard footprint Shielded metal case with insulated baseplate Optional heatsink Lead free design - RoHS compliant 3-year product warranty The TEN 20WI series is a family of high performance 20W DC/DC converter modules featuring ultra wide 4:1 input voltage ranges in a compact 2" x 1.6" low profile package with industry-standard footprint. A very high efficiency allows an operating temperature range of -40C to 85C. A built-in EMI input filter complies with EN 55022, class A. Further standard features include remote On/Off, output voltage trimming, over voltage protection and short-circuit protection. Typical applications for these converters are battery operated equipment and distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required. Models Order code Input voltage range Output voltage Output current max. Efficiency typ. TEN 20-2411WI 5 VDC 4`000 mA 79 % TEN 20-2412WI 12 VDC 1`670 mA 81 % TEN 20-2413WI 9 - 36 VDC 15 VDC 1`330 mA 81 % TEN 20-2421WI (24 VDC nominal) 5 VDC 2`000 mA 79 % TEN 20-2422WI 12 VDC 835 mA 81 % TEN 20-2423WI 15 VDC 665 mA 82 % TEN 20-4811WI 5 VDC 4`000 mA 80 % TEN 20-4812WI 12 VDC 1`670 mA 81 % TEN 20-4813WI 18 - 75 VDC 15 VDC 1`330 mA 81 % TEN 20-4821WI (48 VDC nominal) 5 VDC 2`000 mA 79 % TEN 20-4822WI 12 VDC 835 mA 83 % TEN 20-4823WI 15 VDC 665 mA 84 % http://www.tracopower.com Page 1 of 6 DC/DC Converters TEN 20WI 20 Watt Input Specifications Input current at no load 24 Vin models: 35 mA typ. 48 Vin models: 25 mA typ. Input current at full load 24 Vin models: 1000 mA typ. 48 Vin models: 500 mA typ. Surge voltage (100 msec. max.) 24 Vin models: 50 V max. 48 Vin models: 100 V max. Conducted noise (input) EN 55022 level A, FCC part 15, level A 24 Vin models: without external components 48 Vin models: with capacitor 2.2 F/100V, 1812 MLCC ESD (input) EN 61000-4-2, perf. criteria B Fast transient (input) EN 61000-4-4, perf. criteria B Surge (input) EN 61000-4-5, perf. criteria B Output Specifications Voltage set accuracy 2 % Output voltage adjustment 10 % Regulation - Input variation Vin min. to Vin max. - Load variation 25 - 100%: single output models: dual output models: 0.2 % max. 0.5 % max. 3 % max. (balanced load) 5 % max. (load cross variation 25 % / 100 %) Temperature coefficient 0.02 %/K Ripple and noise (20 MHz Bandwidth) single output models: 75 mVpk-pk max. dual output models: 100 mVpk-pk max. Start up time (nominal Vin and constant resistive load) 20 ms typ. Transient Response (25% load step change) 500 s typ. Short circuit protection indefinite (automatic recovery) Over load protection 150 % of Iout max typ. foldback Over voltage protection 5 Vout models: 6.2 V 12 Vout models: 15 V 15 Vout models: 18 V Minimum load 10% of rated max current (operation at lower load condition will not damage these converters, however, they may not meet all listed specifications) Capacitive load 5 Vout models / 5 Vout models: 6'800 F max. / 3'400 F max. 12 Vout models / 12 Vout models: 2'200 F max. / 680 F max. 15 Vout models / 15 Vout models: 755 F max. / 450 F max. General Specifications Temperature ranges - Operating -40C to +85C - Case temperature +100C max. - Storage -55C to +105C Thermal impedance - with heat-sink TEN-HS2 8.24 K/watt - without heat-sink 10 K/watt Derating see graphs on page 3 to 5 Humidity (non condensing) 95 % rel H max. Reliability, calculated MTBF (MIL-HDBK-217F, at +70C, ground benign) >1.9 Mio. h Isolation voltage (60 sec.) - Input/Output 1`500 VDC Isolation capacitance - Input/Output 300 pF typ. Isolation resistance - Input/Output (500 VDC) >1'000 M Ohm All specifications valid at nominal input voltage, full load and +25C after warm-up time unless otherwise stated. http://www.tracopower.com Page 2 of 6 DC/DC Converters TEN 20WI 20 Watt General Specifications Switching frequency (fixed) 300 kHz typ. (Pulse width modulation PWM) Vibration 10-55Hz, 2G, 30 minutes along X,Y,Z Remote On/Off - ON: 3.5 ... 12 VDC or open circuit. - OFF: 0 ... 1.2 VDC or short circuit pin 3 and pin 2 - OFF idle current: 20 mA typ. Safety standards UL 1950, IEC/EN 60950-1 compliance up to 60 VDC input voltage (SELV limit) Safety approvals - UL/cUL www.ul.com > UL File no.: e188913 Environmental compliance - Reach www.tracopower.com/products/reach-declaration.pdf - RoHS RoHS directive 2011/65/EU Output Voltage Adjustment Trim up Trim down Ru [kohm]* Trim Ru - Vout output +5% +10% 5V 3.9 0.47 12V 56 6.8 output +5% +10% 5V 10 0.82 12V 15V 22 39 1.5 6.8 Rd [kohm]* +Vout 15V 470 2.2 Rd Trim output -5% -10% 5V 5.6 0.68 12V 47 2.7 15V 56 1.8 output -5% -10% 5V 15 1.2 12V 15V 47 47 10 8.2 *approximate values Power De-rating Natural convection with heat-sink TEN-HS2 Natural convection without heat-sink TEN 20-2410WI TEN 20-2411WI 80 80 Output Power (%) 100 Output Power (%) 100 60 40 20 0 -40 60 40 20 -20 0 20 40 60 Ambient Temperature [C] http://www.tracopower.com 80 100 0 -40 -20 0 20 40 60 80 100 Ambient Temperature [C] Page 3 of 6 DC/DC Converters TEN 20WI 20 Watt Power De-rating TEN 20-2412WI TEN 20-2413WI 80 80 Output Power (%) 100 Output Power (%) 100 60 40 20 60 40 20 0 -40 -20 0 20 40 60 80 0 -40 100 -20 0 Ambient Temperature [C] TEN 20-2421WI 80 80 Output Power (%) 100 Output Power (%) 40 60 80 100 80 100 80 100 TEN 20-2422WI 100 60 40 20 60 40 20 0 -40 -20 0 20 40 60 80 0 -40 100 -20 0 Ambient Temperature [C] 40 60 TEN 20-4810WI 100 80 80 Output Power (%) 100 60 40 20 0 -40 20 Ambient Temperature [C] TEN 20-2423WI Output Power (%) 20 Ambient Temperature [C] 60 40 20 -20 0 20 40 60 Ambient Temperature [C] http://www.tracopower.com 80 100 0 -40 -20 0 20 40 60 Ambient Temperature [C] Page 4 of 6 DC/DC Converters TEN 20WI 20 Watt Power De-rating TEN 20-4812WI TEN 20-4811WI 80 80 Output Power (%) 100 Output Power (%) 100 60 40 60 40 20 20 0 -40 -20 0 20 40 60 80 0 -40 100 -20 0 Ambient Temperature [C] TEN 20-4813WI 80 80 Output Power (%) 100 Output Power (%) 40 60 80 100 80 100 80 100 TEN 20-4821WI 100 60 40 60 40 20 20 0 -40 -20 0 20 40 60 80 0 -40 100 -20 0 Ambient Temperature [C] 40 60 TEN 20-4823WI 100 80 80 Output Power (%) 100 60 40 20 0 -40 20 Ambient Temperature [C] TEN 20-4822WI Output Power (%) 20 Ambient Temperature [C] 60 40 20 -20 0 20 40 60 Ambient Temperature [C] http://www.tracopower.com 80 100 0 -40 -20 0 20 40 60 Ambient Temperature [C] Page 5 of 6 DC/DC Converters TEN 20WI 20 Watt Physical Specifications Casing material copper, nickel plated Baseplate material non conductive FR4 Potting material epoxy (UL 94V-0 rated) Weight 50 g (1.2oz) Soldering temperature max. 265C / 10 sec. Outline Dimensions 4 Single Dual 1 +Vin (Vcc) +Vin (Vcc) 2 -Vin (GND) -Vin (GND) (0.5) Remote On/Off 4 No pin +Vout 5 +Vout Common 6 -Vout -Vout 7 45.72 (1.8) (0.22) (0.4) Pin 3 12.7 5 2 1 (0.4) Bottom view (0.2) 6 10.16 3 5.08 (0.4) (0.4) (0.4) 7 (0.2) 5.1 5.6 10.2 10.16 10.16 10.16 40.6 (1.6) Pin-Out Trim 50.8 (2.0) Dimensions in [mm], () = Inch Pin diameter: 1.0 0.05 (0.02 0.002) Pin pitch tolerances: 0.35 (0.014) Casing tolerances: 0.5 (0.02) Heat-sink TEN-HS2 56.0 (2.2) max. Heat-sink Thermal pad Clamp Converter Order code: TEN-HS2 (cont.: heat-sink, thermal pad, 2 clamps) Material: Aluminum Finish: Anodic treatment (black) Weight: 19 g (0.67oz) (without converter) 23.0 (0.9) 17.2 (0.68) max. Note: The product label on converter has to be removed before mounting the heat-sink. For volume orders converters will be supplied with heat-sinks already mounted. Please contact factory for quotation. Separate heat-sinks are only available for prototypes and small quantity orders. Specifications can be changed without notice! Make sure you are using the latest documentation, downloadable at www.tracopower.com www.tracopower.com Rev. July 25. 2014 Page 6 of 6 Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: TRACO Power: TEN 20-2411WI TEN 20-2423WI TEN 20-4813WI TEN 20-4811WI TEN 20-4823WI TEN 20-4812WI TEN 202413WI TEN 20-2412WI TEN 20-2421WI TEN 20-4821WI TEN 20-4822WI TEN 20-2422WI