MAX4611ESD+ - Maxim Integrated Products, Inc.

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

________________________________________________________________

Maxim Integrated Products

19-4793; Rev 6; 5/09

For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,

or visit Maxim’s website at www.maxim-ic.com.

General Description

The MAX4610/MAX4611/MAX4612 are quad, low-volt-

age, single-pole/single-throw (SPST) analog switches.

On-resistance (100Ω, max) is matched between switch-

es to 4Ω, max and is flat (4Ω, max) over the specified

signal range. Each switch handles V+ to GND analog

signal levels. Maximum off-leakage current is only 1nA

at TA= +25°C and 2nA at TA= +85°C.

The MAX4610 has four normally open (NO) switches,

and the MAX4611 has four normally closed (NC)

switches. The MAX4612 has two NO switches and two

NC switches. These CMOS switches operate from a

single +2V to +12V supply. All digital inputs have +0.8V

and +2.4V logic thresholds, ensuring TTL/CMOS-logic

compatibility when using a single +5V supply.

________________________Applications

Battery-Operated Equipment

Audio/Video Signal Routing

Low-Voltage Data-Acquisition Systems

Sample-and-Hold Circuits

Communication Circuits

____________________________Features

♦♦Offered in Automotive Temperature Range

(-40°C to +125°C)

♦♦Guaranteed On-Resistance

100Ωmax (5V Supply)

46Ωmax (12V Supply)

♦♦Guaranteed Match Between Channels (4Ω, max)

♦♦Guaranteed Flatness Over Signal Range (18Ω, max)

♦♦Off-Leakage Current Over Temperature

< 2nA at TA= +85°C

♦♦> 2kV ESD Protection per Method 3015.7

♦♦Rail-to-Rail Signal Handling

♦♦TTL/CMOS-Logic Compatible

MAX4610

TSSOP/SO/DIP

V+

IN1

IN4

NO4

COM4

COM3

NO3

COM2

NO2

COM1

NO1

GND

IN3

IN2

TOP VIEW

INPUT SWITCH STATE

LOW

HIGH

OFF

V+

N.C.

IN1

IN4

IN2

IN3

GND

NO3

MAX4610

2COM1

1NO1

3NO2

COM2

11 NO4

12 N.C.

EP**

10 COM4

9COM3

QFN

**EP = EXPOSED PAD

CONNECT EP TO V+

Pin Configurations/Truth Tables

Ordering Information

Ordering Information continued at end of data sheet.

Contact factory for dice specifications.

EP = Exposed pad.

Denotes a lead(Pb)-free/RoHS-compliant package.

MAX4611/MAX4612 Pin Configurations/Truth Tables appear at end of data sheet.

PART TEMP RANGE PIN-PACKAGE

MAX4610CUD+ 0°C to +70°C 14 TSSOP

MAX4610CSD+ 0°C to +70°C 14 Narrow SO

MAX4610CPD+ 0°C to +70°C 14 Plastic DIP

MAX4610C/D+ 0°C to +70°C Dice*

MAX4610EGE+ -40°C to +85°C 16 QFN-EP**

MAX4610EUD+ -40°C to +85°C 14 TSSOP

MAX4610ESD+ -40°C to +85°C 14 Narrow SO

MAX4610EPD+ -40°C to +85°C 14 Plastic DIP

MAX4610ASD+ -40°C to +125°C 14 Narrow SO

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

2 _______________________________________________________________________________________

ABSOLUTE MAXIMUM RATINGS

ELECTRICAL CHARACTERISTICS—Single +5V Supply

(V+ = +5V ±10%, VIN_H = 2.4V, VIN_L = 0.8V, TA= TMIN to TMAX, unless otherwise noted.)

Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional

operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to

absolute maximum rating conditions for extended periods may affect device reliability.

(Voltages referenced to GND.)

V+ ...........................................................................-0.3V to +13V

IN_, COM_, NO_, NC_ (Note 1)....................-0.3V to (V+ + 0.3V)

Continuous Current (any terminal)

(pulsed at 1ms, 10% duty cycle) .....................................20mA

Peak Current (any terminal)

(pulsed at 1ms, 10% duty cycle) .....................................40mA

ESD per Method 3015.7......................................................> 2kV

Continuous Power Dissipation (TA= +70°C)

14-Pin TSSOP (derate 6.3mW/°C above +70°C) ..........500mW

14-Pin Narrow SO (derate 8.00mW/°C above +70°C) ..640mW

14-Pin Plastic DIP (derate 10.00mW/°C above +70°C) ..800mW

16-Pin QFN (derate 18.5mW/°C above +70°C) ..........1481mW

Operating Temperature Ranges

MAX461_C_ _ ......................................................0°C to +70°C

MAX461_E_ _....................................................-40°C to +85°C

MAX461_A_ _ .................................................-40°C to +125°C

Storage Temperature Range .............................-65°C to +160°C

Lead Temperature (soldering, 10s) .................................+300°C

V+ = 5.5V;

VCOM_= 1V, 4.5V;

VNO_ = 4.5V, 1V

V+ = 4.5V,

ICOM_= 1mA,

VNO_= VNC_ = 3V

V+ = 4.5V;

ICOM_= 1mA;

VNO_= VNC_ = 3V,

2V, 1V

CONDITIONS

INO(OFF)

NO_ or NC_ Off-Leakage

Current (Note 6)

-30 +30

-0.1 +0.1

RFLAT(ON)

On-Resistance Flatness

(Note 5)

V0V+

VCOM_,

VNO_,

VNC_

Analog Signal Range

(Note 3)

12 22

ΩΔRON

On-Resistance Match

Between Channels (Note 4)

1.0 5

70 100

UNITS

MIN TYP MAX

(Note 2)

SYMBOLPARAMETER

TA= +25°C

TA= TMIN to TMAX

TA= +25°C

TA= -40°C to +125°C

V+ = 5.5V;

VCOM_= 1V, 4.5V;

VNO_= VNC_ = 4.5V, 1V

TA= +25°C

nAICOM(OFF)

COM_ Off-Leakage Current

(Note 6)

-30 +30

TA= -40°C to +125°C

-0.1 +0.1

V+ = 5.5V;

VCOM_ = 1V, 4.5V;

VNO_= VNC_ = 1V, 4.5V,

or floating

ICOM(ON)

COM_ On-Leakage Current

(Note 6)

TA= +25°C -0.2 +0.2

On-Resistance RON Ω

V+ = 4.5V,

ICOM_= 1mA,

VNO_= VNC_ = 3V

Note 1: Signals on NO_, NC_, COM_, or IN_ exceeding V+ or GND are clamped by internal diodes. Limit forward-diode current to

maximum current rating.

TA= TMIN to TMAX 8

150TA= TMIN to TMAX

-30 +30TA= -40°C to +125°C

-4 +4TA= -40°C to +85°C

-2 +2TA= -40°C to +85°C

ANALOG SWITCH

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

_______________________________________________________________________________________ 3

ELECTRICAL CHARACTERISTICS—Single +5V Supply (continued)

(V+ = +5V ±10%, VIN_H = 2.4V, VIN_L = 0.8V, TA= TMIN to TMAX, unless otherwise noted.)

PARAMETER SYMBOL MIN TYP MAX

(Note 2) UNITS

Input Current with Input-

Voltage High IIN_H -0.1 ±0.001 +0.1 µA

CONDITIONS

VIN_= 2.4V, all others = 0.8V

Input Current with Input-

Voltage Low IIN_L -0.1 ±0.001 +0.1 µAVIN_= 0.8V, all others = 2.4V

Turn-On Time tON

35 65 ns

Charge Injection VCTE 15pC

CL= 1.0nF, VGEN = 0,

RGEN = 0, Figure 3

TA= +25°C

TA= TMIN to TMAX 90

VCOM_= 3V, Figure 2

TA= +25°C

TA= TMIN to TMAX 30

VCOM_= 3V, Figure 2

Turn-Off Time tOFF

15 28 ns

Power-Supply Range

Signal = 0dBm, Figure 4,

50Ωin and out

On-Channel Bandwidth BW 300 MHz

TA= +25°C

RL= 50Ω, CL= 5pF,

f = 1MHz, Figure 4

Off-Isolation (Note 7) VISO -60 dB

TA= +25°C

RL= 50Ω, CL= 5pF,

f = 1MHz, Figure 5

Crosstalk (Note 8) VCT -80 dB

TA= +25°Cf = 1MHz, Figure 6NO_ or NC_ Capacitance C(OFF) 16 pF

TA= +25°Cf = 1MHz, Figure 6COM_ Off-Capacitance CCOM(OFF) 16 pF

TA= +25°Cf = 1MHz, Figure 6COM_ On-Capacitance CCOM(ON) pF

212V

Supply Current

I+ VIN = 0 or V+,

all switches on or off -1 ±0.001 +1 µA

TA= +25°C

600ΩIN and OUT,

20Hz to 20kHz, 2VP-P

Total Harmonic

Distortion THD %0.009

Input High Voltage VIN_H 2.4 1.5 V

Input Low Voltage VIN_L 1.4 0.8 V

LOGIC INPUT

SUPPLY

DYNAMIC (Note 3)

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

4 _______________________________________________________________________________________

ELECTRICAL CHARACTERISTICS—Single +3V Supply

(V+ = +3V, VIN_H = 2.4V, VIN_L = 0.5V, TA= TMIN to TMAX, unless otherwise noted.)

PARAMETER

Analog Signal Range

(Note 3)

SYMBOL

VCOM_,

VNO_,

VNC_

CONDITIONS MIN TYP MAX

(Note 2)

0V+

UNITS

On-Resistance RON

V+ = 2.7V,

ICOM_= 1mA,

VNO_= VNC_= 1V

175 360

-0.1 +0.1

-2 +2

NO_ or NC_ Off-Leakage

Current (Notes 3, 6) INO(OFF)

V+ = 3.6V,

VCOM_= 0.5V, 3V;

VNO_= VNC_= 3V,

0.5V -30 +30

-0.2 +0.2

TA= +25°C

TA= TMIN to TMAX 450

On-Resistance Match

Between Channels (Note 4) ΔRON

V+ = 2.7V,

ICOM_= 1mA,

VNO_= VNC_= 1V

210

TA= +25°C

TA= TMIN to TMAX 20

TA= +25°C

TA= -40°C to + 85°C

TA= -40°C to + 125°C

-4 +4

COM_ On-Leakage Current

(Notes 3, 6) ICOM(ON)

V+ = 3.6V,

VCOM_= 0.5V, 3V;

VNO_= VNC_= 0.5V,

3V, or floating -30 +30

Input High Voltage VIN_H 2.4 1.0 V

Input Low Voltage VIN_L 1.0 0.5 V

TA=+25°C

TA= -40°C to + 85°C

-0.1 +0.1

TA= -40°C to + 125°C

-2 +2

COM_ Off-Leakage Current

(Notes 3, 6) ICOM(OFF)

V+ = 3.6V,

VCOM_= 0.5V, 3V;

VNO_= VNC_= 3V,

0.5V -30 +30

TA= +25°C

TA= -40°C to +85°C

50 100

120

Turn-On Time tON VCOM_= 1.5V,

Figure 2

140

30 47

Turn-Off Time tOFF VCOM_= 1.5V,

Figure 2 60 ns

TA= +25°C

TA= -40°C to +85°C

TA= -40°C to +125°C

TA= +25°C

TA= TMIN to TMAX

ANALOG SWITCH

LOGIC INPUTS

DYNAMIC (Note 3)

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

_______________________________________________________________________________________ 5

PARAMETER SYMBOL MIN TYP MAX

(Note 2) UNITS

Analog Signal Range

(Note 3)

VCOM_,

VNO_,

VNC_,

0V+V

CONDITIONS

On-Resistance RON

30 45

V+ = 12V,

ICOM = 2mA,

VNO_ = VNC_= 10V

TA= +25°C

TA= TMIN to TMAX 60

Note 2: The algebraic convention, where the most negative value is a minimum and the most positive value a maximum, is used in

this data sheet.

Note 3: Guaranteed by design.

Note 4: ΔRON = RON (max) - RON (min).

Note 5: Flatness is defined as the difference between the maximum and minimum value of on-resistance as measured over the

specified analog signal range.

Note 6: Leakage parameters are 100% tested at maximum-rated hot temperature and guaranteed by correlation at +25°C.

Note 7: Off-Isolation = 20log10 (VCOM_ / VNO_), VCOM_ = output, VNO_ = input to off switch.

Note 8: Between any two switches.

ELECTRICAL CHARACTERISTICS—Single +12V Supply

(V+ = +12V, VIN_H = 4V, VIN_L = 0.8V, TA= TMIN to TMAX, unless otherwise noted.)

Input High Voltage VIN_H 4.0 2.8 V

Input Low Voltage VIN_L 2.5 0.8 V

Positive Supply Current I+ -1 ±0.001 +1 µAVIN_ = 0 or V+, all switches on or off

ANALOG SWITCH

LOGIC INPUTS

SUPPLY

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

6 _______________________________________________________________________________________

__________________________________________Typical Operating Characteristics

(TA = +25°C, unless otherwise noted.)

ON-RESISTANCE vs. VCOM

MAX4610-1A

VCOM (V)

RON (Ω)

0681024 12

V+ = +5V

V+ = +9V

V+ = +12V

ON-RESISTANCE vs. VCOM

MAX4610-1B

VCOM (V)

RON (Ω)

200

100

250

300

350

400

150

034512 6

V+ = +2V

V+ = +3V

V+ = +5V

0 2.01.50.5 1.0 2.5 3.0 3.5 4.0 4.5 5.0

ON-RESISTANCE

vs. VCOM AND TEMPERATURE

MAX4610 toc02

VCOM (V)

RON (Ω)

TA = -40°C

TA = +25°C

TA = +85°C

V+ = +5V

100

0.1

-40 -20 0 20 40 60 80 100

OFF-LEAKAGE vs. TEMPERATURE

MAX4610-03

TEMPERATURE (°C)

OFF-LEAKAGE (pA)

V+ = +5V

VCOM_ = 0

VNO_ OR VNC_ = +4.5V 100

1000

0.1

0.01

-40 -20 0 20 40 60 80 100

ON-LEAKAGE vs. TEMPERATURE

MAX4610-04

TEMPERATURE (°C)

ON-LEAKAGE (pA)

V+ = +5V

VCOM_ = 0

VNO_ OR VNC_ = FLOATING

0.01

0.001

-40 -20 0 20 40 60 80 100

SUPPLY CURRENT vs. TEMPERATURE

0.1

MAX4610-05

TEMPERATURE (°C)

I+ (pA)

V+ = +5V

-1

0462 8 10 12

CHARGE INJECTION vs. VCOM

MAX4610 toc06

VCOM_ (V)

CHARGE INJECTION (pC)

V+ = +5V

V+ = +12V

0.001

10 100 1k 10k 100k 1M

TOTAL HARMONIC DISTORTION PLUS NOISE

vs. FREQUENCY

0.01

0.1

MAX4610-08

FREQUENCY (Hz)

THD + N (%)

600Ω IN AND OUT

V+ = +5V, 2Vp-p SIGNAL

V+ = +3V, 1Vp-p SIGNAL

V+ = +2V, 1Vp-p SIGNAL

-10

-100

10k1k 100k 1M 10M 100M 500M

FREQUENCY RESPONSE

-50

-60

-70

-80

-90

MAX4610 toc07

FREQUENCY (Hz)

GAIN (dB)

PHASE (DEGREES)

-40

-30

-20

180

144

-180

-36

-72

-108

-144

108

PHASE

OFF-ISOLATION

LOSS

Applications Information

Power-Supply Sequencing

and Overvoltage Protection

Do not exceed the absolute maximum ratings, because

stresses beyond the listed ratings may cause permanent

damage to the devices.

Proper power-supply sequencing is recommended for all

CMOS devices. Always apply V+ before applying analog

signals or logic inputs, especially if the analog or logic

signals are not current limited. If this sequencing is not

possible, and if the analog or logic inputs are not current

limited to 20mA, add a small-signal diode (D1) as shown

in Figure 1. If the analog signal can dip below GND, add

D2. Adding protection diodes reduces the analog signal

range to a diode drop (about 0.7V) below V+ (for D1),

and to a diode drop above ground (for D2). Leakage is

unaffected by adding the diodes. On-resistance increas-

es by a small amount at low supply voltages. Maximum

supply voltage (V+) must not exceed 13V.

Adding protection diodes causes the logic thresholds to

be shifted relative to the power-supply rails. This can be

significant when low supply voltages (+5V or less) are

used. With a +5V supply, TTL compatibility is not guar-

anteed when protection diodes are added. Driving IN1

and IN2 all the way to the supply rails (i.e., to a diode

drop higher than the V+ pin, or to a diode drop lower

than the GND pin) is always acceptable.

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

_______________________________________________________________________________________ 7

POSITIVE SUPPLY

COM_

NO_

V+

MAX4610

MAX4611

MAX4612

Figure 1. Overvoltage Protection Using Two External Blocking

Diodes

Pin Description

MAX4610 MAX4611 MAX4612

TSSOP/SO/ DIP QFN TSSOP/SO/DIP QFN TSSOP/SO/DIP QFN

NAME FUNCTION

1, 3, 8, 11 1, 3,

8, 11 — — — — NO1–NO4

Analog Switch Normally Open

Terminals

— — 1, 3, 8, 11 1, 3,

8, 11 — — NC1–NC4

Analog Switch Normally Closed

Terminals

— — — — 1, 8 1, 8 NO1, NO3 Analog Switch Normally Open

Terminals

— — — — 3, 11 3, 11 NC2, NC4 Analog Switch Normally Closed

Terminals

2, 4, 9, 10 2, 4,

9, 10 2, 4, 9, 10 2, 4,

9, 10 COM1–COM4 Analog Switch Common

Terminals

13, 5, 6, 12 14, 5,

6, 13 13, 5, 6, 12 14, 5,

6, 13 IN1–IN4 Logic-Control Digital Input

7 7 7 7 7 7 GND

Ground. Connect to digital

ground.

— 12, 15 — 12, 15 — 12, 15 N.C. No Connection. Not internally

connected.

14 16 14 16 14 16 V+

Positive Analog and Digital-

Supply Voltage Input. Internally

connected to substrate.

— — — — — — EP

Exposed Pad (QFN only).

Connect to V+.

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

8 _______________________________________________________________________________________

tR < 20ns

tF < 20ns

50% 50%

LOGIC

INPUT

300Ω

NO_, NC_

GND

CL INCLUDES FIXTURE AND STRAY CAPACITANCE.

VOUT = VCOM ( RL )

RL + RON

SWITCH

INPUT

IN_

VINH

tOFF

COM_

SWITCH

OUTPUT

0.9 · V0UT 0.9 · VOUT

tON

VOUT

SWITCH

OUTPUT

LOGIC

INPUT

V+

35pF

V+

VOUT

VCOM_

MAX4610

MAX4611

MAX4612

Figure 2. Switching Time

VGEN

GND

NO_, NC_

VOUT

V+

VOUT

ΔVOUT

Q = (ΔVOUT)(CL)

COM_

OFF ON OFF

VIN

V+

RGEN

IN_

MAX4610

MAX4611

MAX4612

Figure 3. Charge Injection

______________________________________________Test Circuits/Timing Diagrams

Protection diodes D1 and D2 also protect against some

overvoltage situations. With Figure 1’s circuit, if the sup-

ply voltage is below the absolute maximum rating, and

if a fault voltage up to the absolute maximum rating is

applied to an analog signal pin, no damage will result.

Operating Considerations for

High-Voltage Supply

The MAX4610/MAX4611/MAX4612 are pin-compatible

with the industry-standard 74HC4066 and the

MAX4066, and are optimized for +5V single-supply

operation. The MAX4610 family is capable of +12V

single-supply operation with some precautions. The

absolute maximum rating for V+ is +13.2V (referenced

to GND). When operating near this region, bypass V+

with a minimum 0.1µF capacitor to ground as close to

the IC as possible.

Caution: The absolute maximum V+ to V- differential

voltage is 13.0V. Typical ±6V or 12V supplies with

±10% tolerances can be as high as 13.2V. This volt-

age can damage the MAX4610/MAX4611/MAX4612.

Even ±5% tolerance supplies may have overshoot or

noise spikes that exceed 13.0V.

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

_______________________________________________________________________________________ 9

IN_

VIN_L OR

VIN_H

SIGNAL

GENERATOR 0dBm

V+

10nF

ANALYZER NO_, NC_

GND

COM_V+

MAX4610

MAX4611

MAX4612

Figure 4. Off-Isolation/On-Channel Bandwidth

SIGNAL

GENERATOR 0dBm

V+

10nF

ANALYZER NO2

GND

COM1

IN1

NO1 50Ω

COM2

IN2

V+

MAX4610

MAX4611

MAX4612

VINL OR

VINH

VINL OR

VINH

Figure 5. Crosstalk

CAPACITANCE

METER

NO_, NC_

COM_

GND

IN_

10nF V+

f = 1MHz

V+

MAX4610

MAX4611

MAX4612

VINL OR

VINH

Figure 6. Channel Off/On-Capacitance

Test Circuits/Timing Diagrams (continued)

Contact factory for dice specifications.

EP = Exposed pad.

Denotes a lead(Pb)-free/RoHS-compliant package.

PART TEMP RANGE PIN-PACKAGE

MAX4611CUD+ 0°C to +70°C 14 TSSOP

MAX4611CSD+ 0°C to +70°C 14 Narrow SO

MAX4611CPD+ 0°C to +70°C 14 Plastic DIP

MAX4611C/D+ 0°C to +70°C Dice*

MAX4611EGE+ -40°C to +85°C 16 QFN-EP**

MAX4611EUD+ -40°C to +85°C 14 TSSOP

MAX4611ESD+ -40°C to +85°C 14 Narrow SO

MAX4611EPD+ -40°C to +85°C 14 Plastic DIP

MAX4611AUD+ -40°C to +85°C 14 TSSOP

MAX4611ASD+ -40°C to +85°C 14 Narrow SO

MAX4612CUD+ 0°C to +70°C 14 TSSOP

MAX4612CSD+ 0°C to +70°C 14 Narrow SO

MAX4612CPD+ 0°C to +70°C 14 Plastic DIP

MAX4612C/D+ 0°C to +70°C Dice*

MAX4612EUD+ -40°C to +85°C 14 TSSOP

MAX4612ESD+ -40°C to +85°C 14 Narrow SO

MAX4612EGE+ -40°C to +85°C 16 QFN-EP**

MAX4612EPD+ -40°C to +85°C 14 Plastic DIP

MAX4612AUD+ -40°C to +125°C 14 TSSOP

MAX4612ASD+ -40°C to +125°C 14 Narrow SO

Ordering Information (continued)

MAX4610/MAX4611/MAX4612

Low-Voltage, Quad, SPST

CMOS Analog Switches

10 ______________________________________________________________________________________

MAX4612

TSSOP/SO/DIP

V+

IN1

IN4

NC4

COM4

COM3

NC3

COM2

NO2

COM1

NO1

GND

IN3

IN2

TOP VIEW

INPUT NO1, NO2

LOW

HIGH

OFF

NC3, NC4

OFF

QFN

16 15 14 13

7 8

MAX4612

V+ N.C. IN1 IN4

IN2 IN3 GND NO3

COM1

NO1

NC2

COM2

NC4

N.C.

COM4

COM3

EP**

**EP = EXPOSED PAD, CONNECT EP TO V+

MAX4611

TSSOP/SO/DIP

V+

IN1

IN4

NC4

COM4

COM3

NC3

COM2

NC2

COM1

NC1

GND

IN3

IN2

TOP VIEW

INPUT SWITCH STATE

LOW

HIGH

OFF

QFN

+16 15 14 13

7 8

MAX4611

V+ N.C. IN1 IN4

IN2 IN3 GND NC3

COM1

NC1

NC2

COM2

NC4

N.C.

COM4

COM3

QFN

EP**

**EP = EXPOSED PAD, CONNECT EP TO V+

Pin Configurations/Truth Tables (continued)

PACKAGE TYPE PACKAGE CODE DOCUMENT NO.

14 TSSOP U14+1 21-0066

14 Narrow SO S14+2 21-0041

14 PDIP P14+6 21-0043

16 QFN G1644-1 21-0091

Package Information

For the latest package outline information, go to www.maxim-ic.com/packages.

Low-Voltage, Quad, SPST

CMOS Analog Switches

Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are

implied. Maxim reserves the right to change the circuitry and specifications without notice at any time.

Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________

Revision History

REVISION

NUMBER

REVISION

DATE DESCRIPTION PAGES

CHANGED

0 1/99 -— —

6 5/09 Added lead-free packaging and added changes to EC table 1-4, 7, 9-13