SDI Series
• 16 Pin DIP SSR
• Ratings to 1.5A @ 28 0 VAC
• SCR ou tp u t
• Cu r re nt c on trol in pu t
• Zero-crossing (resistive loads) or random-f ire (i nduct ive loads) output
PRODUCT SELECTION
Control Voltage 1.5A 1.5A
10-35mA SDI2415 SDI2415R
AVAILABLE OPTIONS
OUTPUT SPECIFICATIONS (1)
Description
Operating Voltage (47-63Hz) [Vrms] 12-280
Transient Overvoltage [Vpk] 600
Maximum Off-State Leakage Current @ Rated Voltage [mArms] 0.01
Minimum Off-State dv/dt @ Maximum Rated Voltage [V/µsec] (3) 500
Maximum Load Current [Arms](3) 1.5
Minimum Load Current [Arms] 0.025
Maximum Surge Current (16.6ms) [Apk] 30
Maximum On-State Voltage Drop @ Rated Current [Vpk] 1.2
Minimum Power Factor (with Maximum Load) 0.5
INPUT SPECIFICATIONS (1)
Description SDI
Control Voltage Range -
Control Current Range 10-32 mA
Must Turn On Voltage -
Must Turn On Current 10 mA
Must Turn Off Voltage -
Must Turn Off Current 1.0 mA
Typical Input Current @ 5 VDC -
Nominal Input Impedance -
Maximum Turn-On Time [msec] (4) 1/2 Cycle
Maximum Turn-Off Time [msec] 1/2 Cycle
GENERAL SPECIFICATIONS
Description Parameters
Dielectric Strength, Input/Output/Base (50/60Hz)( 2) 3750 Vrms
Minimum Insulation Resistance (@ 500 VDC)(2) 109 Ohm
Maximum Capacitance, Input/Output 2.0 pF
Ambient Operating Temperature Range -30 to 80°C
Ambient Storage Temperature Range -30 to 125°C
Weight (typical) 0.10 oz. (2.9g)
Encapsulation Thermally Conductive Epoxy
GE NERAL NOTES
1) Al l par am eters at 25¼°C unless otherwise speci fi ed.
2) D iel ectri c and i nsul ation r esistanc e ar e measur ed
3) Off-State dv/dt test method per EIA/NARM standard RS-443
MECHANICAL SPECIFICATIONS
DC CONTROL
PIN 8: AC LOAD
PIN 10: AC LOAD
PIN 1 6: +DC CONTROL
PIN 1: -DC CONTROL
THERMAL DERATE INFORMATION
WIRING DIAGRAM
AGENCY APPROVALS
UL 116950
C SA LR 81689
Rev. 010411
ANNEX - ENVIROMENTAL INFORMATION
