leaded resISTORS Melf Metal Film Resistors General Type Normal & Miniature Style [ MMF Series ] FEATURES Power Rating 1/6W, 1/4W, 0.4W, 1/2W, 0.6W, 1W Resistance Tolerance 0.1%, 0.25%, 0.5%, 1%, 2%, 5% T.C.R. 15ppm/C, 25ppm/C, 50ppm/C, 100ppm/C, 200ppm/C DERATING CURVE For resistors operated in ambient temperatures above 70C, power rating must be derated in accordance with the curve below. INTRODUCTION The MMF Series Melf Metal Film Resistors are manufactured using a vacuum sputtering system to deposit multiple layers of mixed metal alloys and passivative materials onto a carefully treated high grade ceramic substrate. After a helical groove has been cut in the resistive layer, SMD enabled structure. The resistors are coated with layers of blue color lacquer. Rated Load (%) 70 155 C 100 80 60 40 20 20 40 60 80 Ambient Temperature (C) 100 120 140 160 DIMENSIONS Unit: mm STYLE D C L DIMENSION Normal Miniature L D C Min. MMF-12 MMF25S / MMF204 3.500.2 1.400.15 0.5 MMF-25 MMF50S / MMF207 5.900.2 2.200.1 0.5 MMF-50 MMF1WS 8.500.2 3.200.2 0.5 27 Note: ELECTRICAL CHARACTERISTICS STYLE MMF-12 MMF25S MMF204 MMF-25 MMF50S MMF207 MMF-50 MMF1WS Power Rating at 70C 1/6W 1/4W 0.4W 1/4W 1/2W 0.6W 1/2W 1W Maximum Working Voltage 150V 200V 250V 350V Maximum Overload Voltage 300V 400V 500V 700V Voltage Proof 300V 500V 700V Resistance Range 1 - 1M & 0 for E24 & E96 series value, 100 - 100K for E192 series value Operating Temp. Range -55C to +155C Temperature Coefficient 15ppm/C, 25ppm/C, 50ppm/C, 100ppm/C, 200ppm/C Note: Special value is available on request ENVIRONMENTAL CHARACTERISTICS PERFORMANCE TEST TEST METHOD Short Time Overload IEC 60115-1 4.13 2.5 times RCWV for 5 Sec. 0.5%+0.05 Voltage Proof IEC 60115-1 4.7 in V-block for 60 Sec., test voltage by type By type Temperature Coefficient IEC 60115-1 4.8 -55C to +155C By type Insulation Resistance IEC 60115-1 4.6 in V-block for 60 Sec. >10,000M Solderability IEC 60115-1 4.17 2355C for 30.5 Sec. 95% Min. coverage Solvent Resistance of Marking IEC 60115-1 4.30 IPA for 50.5 Min. with ultrasonic No deterioration of coatings and markings Periodic-pulse Overload IEC 60115-1 4.39 4 times RCWV 10,000 cycles (1 Sec. on, 25 Sec. off) 1.0%+0.05 Damp Heat Steady State IEC 60115-1 4.24 402C, 90-95% RH for 56 days, loaded with 0.1 times RCWV 2.0%+0.1 Endurance at 70C IEC 60115-1 4.25 702C at RCWV for 1,000 Hr. (1.5 Hr. on, 0.5 Hr. off) 2.0%+0.1 Temperature Cycling IEC 60115-1 4.19 -55C Room Temp. +155C Room Temp. (5 cycles) 0.75%+0.05 Resistance to Soldering Heat IEC 60115-1 4.18 2603C for 101 Sec., immersed to a point 30.5mm from the body 0.5%+0.05 Note: Rated Continuous Working Voltage (RCWV) = APPRAISE Power Rating x Resistance Value