HMC411MS8G / 411MS8GE v02.0607 Typical Applications Features The HMC411MS8G / HMC411MS8GE is ideal for: Conversion Loss: 9 dB * Long Haul Radio Platforms LO/RF Isolation: 27 dB * Microwave Radio LO/IF Isolation: 30 dB * VSAT Input IP3: +16 dBm No External Components 9 MIXERS - SGL-BAL - SMT GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz MSOP8G SMT Package Functional Diagram General Description The HMC411MS8G & HMC411MS8GE are passive single balanced mixers that operates between 10 GHz and 15 GHz. The HMC411MS8G(E) operate with LO drive levels between +9 dBm and +15 dBm, and provide 9 dB conversion loss across the entire specified frequency band. These mixers require no external components or bias. Electrical Specifi cations, TA = +25 C IF = 1.45 GHz LO = +13 dBm Parameter Min. Frequency Range, RF & LO Frequency Range, IF Typ. Units Max. 10.0 - 15.0 GHz DC - 3 GHz Conversion Loss 9 12 dB Noise Figure (SSB) 9 12 dB LO to RF Isolation 20 27 dB LO to IF Isolation 20 30 dB RF to IF Isolation 8 15 - 20 dB IP3 (Input) 11 16 dBm 1 dB Compression (Input) 5 9 dBm * Unless otherwise noted, all measurements performed as downconverter, IF= 1.45 GHz. 9 - 260 For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Conversion Gain vs. Temperature @ LO = +13 dBm Isolation @ LO = +13 dBm 0 -10 -5 -10 +25 C -40 C +85 C -15 -20 9 -30 -40 -20 RF/IF LO/RF LO/IF -50 9 10 11 12 13 14 15 16 9 10 11 FREQUENCY (GHz) Conversion Gain vs. LO Drive 14 15 16 15 16 0 LO = +7 dBm LO = +9 dBm LO = +11 dBm LO = +13 dBm LO = +15 dBm -5 RETURN LOSS (dB) CONVERSION GAIN (dB) 13 Return Loss @ LO = +13 dBm 0 -10 -15 -20 -5 -10 RF LO -15 -20 9 10 11 12 13 14 15 16 9 10 11 FREQUENCY (GHz) 12 13 14 FREQUENCY (GHz) Upconverter Performance Conversion Gain @ LO = +13 dBm IF Bandwidth @ LO = +13 dBm 0 0 CONVERSION GAIN (dB) IF CONVERSION GAIN IF RETURN LOSS -5 RESPONSE (dB) 12 FREQUENCY (GHz) MIXERS - SGL-BAL - SMT ISOLATION (dB) CONVERSION GAIN (dB) 0 -10 -15 -20 -25 -5 -10 -15 -20 0 0.5 1 1.5 2 2.5 3 3.5 FREQUENCY (GHz) 4 4.5 5 9 10 11 12 13 14 15 16 FREQUENCY (GHz) For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 261 HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Input IP3 vs. Temperature @ LO = +13 dBm* 25 20 20 IP3 (dBm) 25 15 LO = +11 dBm LO = +13 dBm LO = +15 dBm 10 15 +25 C -40 C +85 C 10 5 5 10 11 12 13 14 15 10 11 12 FREQUENCY (GHz) 13 14 Input P1dB vs. Temperature @ LO = +13 dBm 0 45 CONVERSION GAIN (dB) LO = +11 dBm LO = +13 dBm LO = +15 dBm 40 35 30 25 20 -5 -10 +25 C -40 C +85 C -15 -20 10 11 12 13 14 15 9 10 FREQUENCY (GHz) 11 12 0 1 2 0 XX 0 1 7 0 2 47 66 44 3 >95 >95 >95 4 N/A >95 >95 14 15 16 Harmonics of LO nLO mRF 13 FREQUENCY (GHz) MxN Spurious @ IF Port nLO Spur @ RF Port 3 4 LO Freq. (GHz) 1 5 37 49 42 N/A 9 54 10.5 56 57 12 58 77 >95 >95 RF = 14.45 GHz @ -10 dBm LO = 13 GHz @ +13 dBm All values in dBc relative to the IF power level. Measured as downconverter. 2 3 25 18 46 53 25 20 52 66 27 24 47 63 13.5 27 33 61 N/A 15 27 47 67 N/A 16.5 24 52 63 N/A LO = +13 dBm All values in dBc below input LO level @ RF port. * Two-tone input power = 0 dBm each tone, 1 MHz spacing. 9 - 262 15 FREQUENCY (GHz) Input IP2 vs. LO Drive * IP2 (dBm) MIXERS - SGL-BAL - SMT 9 IP3 (dBm) Input IP3 vs. LO Drive* For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 4 HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Absolute Maximum Ratings RF / IF Input +15 dBm LO Drive +27 dBm IF DC Current 2 mA Storage Temperature -65 to +150 C Operating Temperature -40 to +85 C ESD Sensitivity (HBM) Class 1A 9 MIXERS - SGL-BAL - SMT ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS Outline Drawing NOTES: 1. LEADFRAME MATERIAL: COPPER ALLOY 2. DIMENSIONS ARE IN INCHES [MILLIMETERS] 3. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.15mm PER SIDE. 4. DIMENSION DOES NOT INCLUDE MOLDFLASH OF 0.25mm PER SIDE. 5. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. Package Information Part Number Package Body Material Lead Finish MSL Rating HMC411MS8G Low Stress Injection Molded Plastic Sn/Pb Solder MSL1 HMC411MS8GE RoHS-compliant Low Stress Injection Molded Plastic 100% matte Sn MSL1 Package Marking [3] [1] H411 XXXX [2] H411 XXXX [1] Max peak reflow temperature of 235 C [2] Max peak reflow temperature of 260 C [3] 4-Digit lot number XXXX For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 263 HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Pin Number Funciton Description 1, 8 GND Pins and exposed ground slug must connect to RF ground. 9 2 LO This pin is AC coupled and matched to 50 Ohms. MIXERS - SGL-BAL - SMT Pin Descriptions 3, 4, 6 N/C Not Connected 5 IF This pin is DC coupled. For applications not requiring operation to DC, this port should be DC blocked externally using a series capacitor whose value has been chosen to pass the necessary IF frequency range. For operation to DC, this pin must not source/sink more than 2 mA of current or die non-function and possible die failure will result. 7 RF This pin is AC coupled and matched to 50 Ohms. 9 - 264 Interface Schematic For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com HMC411MS8G / 411MS8GE v02.0607 GaAs MMIC SINGLE-BALANCED MIXER, 10 - 15 GHz Evaluation PCB MIXERS - SGL-BAL - SMT 9 List of Materials for Evaluation PCB 103350 [1] Item Description J1 - J2 PCB Mount SMA RF Connector, SRI J3 PCB Mount SMA Connector, Johnson U1 HMC411MS8G / HMC411MS8GE PCB [2] 101650 Evaluation Board [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 The circuit board used in the final application should use RF circuit design techniques. Signal lines should have 50 ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation circuit board shown is available from Hittite upon request. For price, delivery, and to place orders, please contact Hittite Microwave Corporation: 20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com 9 - 265