01/2003
S24 Package
SOT-89
Figure 1: Block Diagram
AGB3304
50Ω High IP3 Low Noise
Wideband Gain Block
ADVANCED PRODUCT INFORMA TION - Rev 0.0
FEATURES
• On-chip Active Bias
• 250-2500 MHz Frequency Range
• +39 dBm Output IP3 at 850 MHz
• 5 dB Noise Figure at 850 MHz
• 18 dB Gain at 850 MHz
• +22 dBm P1dB
• SOT-89 Package
• Single +5 V Supply
• Case Temperature: -40 to +100 °C
APPLICATIONS
• Cellular Base Stations for W-CDMA, CDMA,
TDMA, GSM, PCS and CDPD systems
• Fixed Wireless
• MMDS/WLL
• WLAN
PRODUCT DESCRIPTION
The AGB3304 is one of a series of high performance
InGaP HBT amplifiers designed for use in
applications requiring high linearity, low noise and
low distortion. Active bias circuits on-chip eliminate
the need for external resistive feedback. With a high
output IP3, low noise figure, and wide band operation,
the AGB3304 is ideal for 50 Ω wireless infrastructure
applications such as Cellular Base Stations, MMDS,
and WLL. Offered in a low cost SOT-89 surface mount
package, the AGB3304 requires a single +5 V supply ,
and typically consumes 0.6 Watts of power.
RF Output
/ Bias
RF Input
Active
Bias
2ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
2 31
4
RF
IN
RF
OUT
GND
GND
Figure 2: Pinout (X-ray T op View)
T able 1: Pin Description
NIP EMAN NOITPIRCSED
1FR
NI
tupnIFR
2DNGdnuorG
3FR
TUO
saiB/tuptuOFR
4DNGdnuorG
ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
3
ELECTRICAL CHARACTERISTICS
T able 2: Absolute Minimum and Maximum Ratings
Stresses in excess of the absolute ratings may cause permanent
damage. Functional operation is not implied under these conditions.
Exposure to absolute ratings for extended periods of time may
adversely affect reliability.
T able 3: Operating Ranges
The device may be operated safely over these conditions; however, parametric
performance is guaranteed only over the conditions defined in the electrical
specifications.
RETEMARAP NIM XAM TINU
V(egatloVeciveD
CC
)06+CDV
P(rewoPtupnIFR
NI
)-01+mBd
T(erutarepmeTegarotS
GTS
)04-051+C°
erutarepmeTnoitcnuJ-002+C°
RETEMARAP NIM PYT XAM TINU
)f(ycneuqerFgnitarepO052- 0052 zHM
V(egatloVylppuS
YLPPUS
)-5+- CDV
T(erutarepmeTesaC
C
)04-- 001+C°
4ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
5.6 pF
9pF 0.01 µF
10 pF
1.2 pF
4.7 nH
0.01 µF100 pF
100 nH
+5
VDC
RF OutputRF Input AGB3304
0.5 pF
All capacitors are muRata GRM39 series.
The 100 nH inductor is a Coilcraft 0603CS series.
The 4.7 nH inductor is a Toko LL1608 series.
0.01 µF
T able 4: Electrical Specifications
(TA = +25 °C, VSUPPLY = +5 VDC, see Application Circuits (2))
Notes:
( 1) OIP3 is measured with two tones at 1 MHz spacing at 0 dBm output power
per tone.
(2) Performance as measured on ANADIGICS test fixture, using the appropriate
Application Circuit (see Figures 3 through 5).
RETEMARAP NIM PYT XAM TINU
S(niaG
12
)
zHM058
zHM0591
zHM0412
-
-
-
81
41
5.31
-
-
-
Bd
Bd
Bd
3PItuptuO
)1(
zHM058
zHM0591
zHM0412
-
-
-
93+
73+
73+
-
-
-
mBd
mBd
mBd
)Bd1P(noisserpmoCBd1tuptuO-22+- mBd
erugiFesioN
zHM058-2.5- Bd
(ecnatsiseRlamrehT θ
CJ
)-49- W/C°
tnerruCylppuS-021- Am
Figure 3: 850 MHz Application Circuit (50 ΩΩ
ΩΩ
Ω T erminations)
ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
5
Figure 4: 1950 MHz Application Circuit (50 ΩΩ
ΩΩ
Ω T erminations)
1.0 pF
0.01 µF 0.01 µF
10 pF
6.8 nH
0.01 µF100 pF
100 nH
+5
VDC
RF OutputRF Input AGB3304
All capacitors are muRata GRM39 series.
The 100 nH inductor is a Coilcraft 0603CS series.
The 6.8 nH inductor is a Toko LL1608 series.
0.5 pF
0.01 µF 0.01 µF
10 pF
5.6 nH
0.01 µF100 pF
100 nH
+5
VDC
RF OutputRF Input AGB3304
All capacitors are muRata GRM39 series.
The 100 nH inductor is a Coilcraft 0603CS series.
The 5.6 nH inductor is a Toko LL1608 series.
Figure 5: 2140 MHz Application Circuit (50 ΩΩ
ΩΩ
Ω T erminations)
6ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
PACKAGE OUTLINE
Figure 6: S24 Package Outline – SOT-89
Figure 7: Branding Specification
3304
LLLLNN
LLLL= FOUR NUMERIC CHARACTERS
ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
AGB3304
7
NOTES
WARNING
ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS
product in any such application without written consent is prohibited.
IMPORTANT NOTICE
ANADIGICS, Inc.
141 Mount Bethel Road
Warren, New Jersey 07059, U.S.A.
Tel: +1 (908) 668-5000
Fax: +1 (908) 668-5132
URL: http://www.anadigics.com
E-mail: Mktg@anadigics.com
ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without
notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are
subject to change prior to a product’s formal introduction. Information in Data Sheets have been carefully checked and are
assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges
customers to verify that the information they are using is current before placing orders.
ADVANCED PRODUCT INFORMATION - Rev 0.0
01/2003
8
AGB3304
ORDERING INFORMA TION
REBMUNTRAP ERUTAREPMET
EGNAR
EGAKCAP
NOITPIRCSED GNIGAKCAPTNENOPMOC
1Q42S4033BGAC°001+ot04-egakcaP98-TOSleeRdnaepaTeceip000,1
