DDR-3 DIMM Press-Fit Vertical Mount Socket FCN-07 Series * * RoHS compliant Features DDR-3: 240pin DIMM socket connector (press-fit type) Fujitsu original unique structure for twin contact points structure. Item Specification Operating temperature range -55C to +85C Current rating DC 0.5A Voltage rating AC 25V Contact resistance 40m maximum (DC 20mv, 10mA) Dielectric withstanding voltage AC 500V for 1 minute Insulation resistance 1,000M minimum (DC500V) Insertion force 155.7N (about 15.9kgf) less than Compliant pin insertion force 4,800N (about 489.5kgf) less than Double contact materials Item Specification Insulating material LCP, UL94 V-0 Conductor Copper Alloy Plating Contact Gold plating Compliant Tin plating Hook Fujitsu's FCN-07 DDR-3 DIMM socket is a vertical mount press-fit socket. The unique contact structure provides for twin points of contact that insure that dust is wiped clean when module is installed. In addition, the twin points guarantee constant contact between the module and contact even in a high vibration environment. LCP, UL94V-0 Plastic tray quantity: 40 pieces/tray Container quantity: 200 pieces 1 DDR-3DIMM Press-Fit Vertical Mount Socket SPECIFICATIONS FCN-074J240-G/1P A No.121 A No.240 No.120 133.75(*b) (card slot length) No.1 144.80.5 Max.142 Min.128.6(*a) 22.70.25 Center line of polarizing key Center line of (*a)(*b) (12) 7.50.2 710.1 470.1 570.1 2.10.08 2.250.15 (4.3) 50.1 Date Code 1.420.05 ( 1.30.05 0.690.1 3.30.2 Max.165 Min.5 Max.26 Min.14.5 Min.10 Ejector moving area 0.730.1 A-A X-section A-A Ejector open Max.165 No.121 No.1 A A 133.75(*b) Unit: mm No.240 No.120 2 DDR-3DIMM Press-Fit Vertical Mount Socket SPECIFICATIONS FCN-074J240-G/1P Keep out area 165.0 -0 PCB foot print Max.142 11.5 2.450.05 No.121 Detail A No.240 Center line of foot print (12) 7.7 -0 Keep out area No.1 No.120 570.05 50.05 1x(72-1)= 710.1 1x(48-1)= 470.1 1.9 0.05 1.9 0.05 1.9 0.05 10.05 0.560.05 PTH 2400.66Drill hole) 10.05 Pad 240 133.350.15 (12) (0.5) 0.50 30 -0.15 2x9.50.1 4x30.1 Component area (4) 2x17.30.1 2x(2.8) Center line of module board Detail A Pad 10.05(pitch) 1x(48-1)= 470.1 2x(5.175) 2.50.05 50.05 Pad 120 4x 2.10.15 +0.10 1.270.1 C 0.1-0.05 1x(72-1)= 710.1 2.50.2 0.20.15 3.80.15 240X 0.80.05 Unit: mm 1.50.1 Detail A 3 DDR-3DIMM Press-Fit Vertical Mount Socket TRAY Fujitsu Components International Headquarter Offices Japan Fujitsu Component Limited Gotanda-Chuo Building 3-5, Higashigotanda 2-chome, Shinagawa-ku Tokyo 141 8630, Japan Tel: (81-3) 5449-7010 Fax: (81-3) 5449-2626 Email: promothq@fcl.fujitsu.com Web: www.fcl.fujitsu.com Europe Fujitsu Components Europe B.V. Diamantlaan 25 2132 WV Hoofddorp Netherlands Tel: (31-23) 5560910 Fax: (31-23) 5560950 Email: info@fceu.fujitsu.com Web: emea.fujitsu.com/components/ North and South America Fujitsu Components America, Inc. 250 E. Caribbean Drive Sunnyvale, CA 94089 U.S.A. Tel: (1-408) 745-4900 Fax: (1-408) 745-4970 Email: components@us.fujitsu.com Web: http://us.fujitsu.com/components/ Asia Pacific Fujitsu Components Asia Ltd. 102E Pasir Panjang Road #01-01 Citilink Warehouse Complex Singapore 118529 Tel: (65) 6375-8560 Fax: (65) 6273-3021 Email: fcal@fcal.fujitsu.com Web: http://www.fujitsu.com/sg/services/micro/components/ (c)2011 Fujitsu Components America, Inc. All rights reserved. All trademarks or registered trademarks are the property of their respective owners. Fujitsu Components America or its affiliates do not warrant that the content of datasheet is error free. In a continuing effort to improve our products Fujitsu Components America, Inc. or its affiliates reserve the right to change specifications/datasheets without prior notice. Rev. July 26, 2011. 4