KEMET Organic Capacitor (KO-CAP(R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Overview The KEMET Organic Capacitor (KO-CAP) is a solid electrolytic capacitor with a conductive polymer cathode, capable of delivering very low ESR and an improved capacitance retention at high frequencies. KO-CAP combines the low ESR of the multilayer ceramic, the high capacitance of aluminum electrolytic and the volumetric efficiency of tantalum into a single surface mount package. Unlike liquid electrolyte-based capacitors, KO-CAP has a very long operational life and a high ripple current capabilities. The T591/T597/T598/T599 High Humidity and High Temperature Polymer Electrolytic capacitors deliver higher capacitance and ESR stability under harsh environmental conditions. Enhancements to the design and selected material upgrades were introduced to deliver 500 hours (T591) or 1,000 hours (T598, T599) at 85C/85% RH rated voltage and to fully comply with the AEC-Q200 qualification testing with maximum operational temperature life up to 125C and 150C respectively. These capacitors are manufactured in an ISO TS 16949 certified plants and are subjected to PPAP/PSW, as well as change control. Benefits Applications * Ultra low ESR * Full compliance with AEC-Q200 qualification test plan (T597 FD 125C, T598 125C, T599 150C) * Qualification plan based on AEC-Q200 with 85C/85% RH load specification limited to 500 hours (T591) * Extended endurance test qualification for T598/T599 (VR < 16 V) , up to 2,000 hours 125C * TS 16949 certified plants * Subject to PPAP/PSW and change control * Meets or exceeds EIA standard 535BAAC * Tape & Reel standard packaging per EIA 481 * Halogen-free epoxy and RoHS compliant Typical applications include decoupling and filtering in a variety of market segments, with special emphasis in automotive applications such as infotainment, ADAS, chassis and safety, as well as powertrain, where harsh conditions, such as high humidity and temperature, are a concern. One world. One KEMET (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 1 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC K-SIM For a detailed analysis of specific part numbers, please visit ksim.kemet.com to access KEMET's K-SIM software. KEMET K-SIM is designed to simulate behavior of components with respect to frequency, ambient temperature, and DC bias levels. Ordering Information Standard Construction T 59X Capacitor Class T = Tantalum Series 591 = 500 Hours load humidity 598 = AEC-Q200 qualified (125C) 599 = AEC-Q200 qualified (150C) Face Down Construction T 597 Capacitor Class T = Tantalum Series 597 = AEC-Q200 qualified (125C) face down construction D 107 M Case Size Capacitance Code (pF) B D V X First two digits represent significant figures. Third digit specifies number of zeros. M = 20% K = 10% S 476 M Case Size Capacitance Code (pF) P S First two digits represent significant figures. Third digit specifies number of zeros. 010 A T Capacitance Rated Voltage Failure Rate/ Termination Tolerance (VDC) Design Finish 2R5 = 2.5 006 = 6.3 010 = 10 016 = 16 020 = 20 025 = 25 035 = 35 050 = 50 006 A = N/A A Capacitance Rated Voltage Failure Rate/ Tolerance (VDC) Design M = 20% 2R5 = 2.5 006 = 6.3 010 = 10 A = N/A T = 100% Tin (Sn) E025 ESR Maximum ESR in m, 025 = 25 m P E200 Termination Finish ESR P = Ni-Pd-Au Maximum ESR in m, 200 = 200 m Packaging (C-Spec) Blank = 7" Reel 7280 = 13" Reel Packaging (C-Spec) Blank = 7" Reel Performance Characteristics Item Performance Characteristics Operating Temperature Rated Capacitance Range Capacitance Tolerance Rated Voltage Range -55C to 105C/125C/150C 10 - 470 F at 120 Hz/25C K Tolerance (10%), M Tolerance (20%) 2.5 - 50 V DF (120 Hz) Refer to Part Number Electrical Specification Table ESR (100 kHz) Refer to Part Number Electrical Specification Table Leakage Current 0.1 CV (A) at rated voltage after 5 minutes T597: 0.3 CV (A) at rated voltage after 5 minutes (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 2 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Environmental Compliance RoHS compliant (6/6) according to Directive 2002/95/EC when ordered with 100% Sn solder. Halogen-free. Qualification Test Endurance Storage Life Humidity Condition Characteristics 105C at rated voltage, 2,000 hours 125C at 2/3 rated voltage, 2,000 hours*2 150C at 2/3 rated voltage, 1,000 hours (T599, VR > 16 V) 150C at 2/3 rated votage, 2,000 hours (T599, VR < 16 V) C/C DF Within 2 x initial limit DCL Within 2 x initial limit ESR C/C 105C at 0 volts, 2,000 hours 125C at 0 volts, 1,000 hours*2 150C at 0 volts, 1,000 hours (T599) Within 2 x initial limit DCL Within 2 x initial limit ESR Within 2 x initial limit Within 1.5 x initial limits DCL Within initial limit ESR MIL-STD-202, Method 106, 65C, 90 - 100% RH, no load, 10 cycles DF Within initial limit Within initial limit ESR Within 2 x initial limit Surge Voltage Temperature Stability Mechanical Shock/ Vibration DF JESD22, Test Method A104, -55C to +105C/+125C/+150C *2, 1,000 cycles Extreme temperature exposure at a succession of continuous steps at +25C, -55C, +25C, +85C, +105C/+125C/+150C *2, +25C Within -20%/+10% of initial value Within initial limits DCL Within initial limit ESR Within 2 x initial limits C/C 105C, 1.32 x rated voltage, 1,000 cycles, 33 in series 125C/150C, 1.32 x (0.67 x VR), 1,000 cycles, 33 in series*2 Within 2 x initial limit Within -10%/+20% of initial value DCL C/C Temperature Cycling Within -5%/+35% of initial value DF C/C Moisture Resistance*1 Within 2 x initial limit Within -20%/+10% of initial value DF C/C 85C, 85% RH, load, 500 hours (T591) 85C, 85% RH, load, 1,000 hours (T597, T598, T599) Within -20%/+10% of initial value Within -20%/+10% of initial value DF Within initial limits DCL Within initial limits ESR Within initial limits +25C -55C +85C +105C/+125C/+150C *2 C/C IL 20% 20% 30%*4 DF IL IL 1.2 x IL 1.5 x IL DCL IL N/A 10 x IL 10 x IL AEC-Q200 (MIL-STD-202, Method 213, Figure 1, Condition F.) AEC-Q200 (MIL-STD-202, Method 204, 5 G for 20 minutes/12 cycles each of 3 orientations. Test from 10 - 2, 000 Hz.) *3 C/C Within 10% of initial value DF Within initial limits ESR Within initial limits DCL Within initial limits T598 only Refer to part number specifications for individual temperature classification *3 IL = Initial limit *4 For T599 ( 16 V) apply -30%/+40% *1 *2 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 3 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Reliability KO-CAP capacitors have an average failure rate of 0.5 %/1,000 hours at category voltage, UC, and category temperature, TC. These capacitors are qualified using industry test standards at UC and TC. The minimum test time (1,000 hours or 2,000 hours) is dependent on the product. The actual life expectancy of KO-CAP capacitors increases when application voltage, UA, and application temperature, TA, are lower than UC and TC. As a general guideline, when UA < 0.9 * UC and TA < 85C, the life expectancy will typically exceed the useful lifetime of most hardware (> 10 years). The lifetime of a KO-CAP capacitor at a specific application voltage and temperature can be modeled using the equations below. A failure is defined as passing enough current to blow a 1-amp fuse. The calculation is an estimation based on empirical results and is not a guarantee. VAF = [ ( TAF = e ( ) UC n UA Ea 1 1 k 273+TA 273+TC )] where: TAF = acceleration factor due to temperature, unitless Ea = activation energy, 1.4 eV where: VAF = acceleration factor due to voltage, unitless UC = category voltage, volt UA = application voltage, volt k = Boltzmann's constant, 8.617E-5 eV/K TA = application temperature, C n = exponent, 16 TC = category temperature, C AF = VAF * TAF LifeU ,T = LifeU ,T * AF A A C C where: where: LifeUA, TA = guaranteed life application voltage and temperature, years AF = acceleration factor, unitless LifeUC, TC = guaranteed life category voltage and temperature, years TAF = accerlation factor due to temperature, unitless VAF = acceleration factor due to voltage, unitless AF = acceleration factor, unitless Reliability Table 1 - Common Temperature Range Classifications 85C (TR)/ 85C (TC) 105C (TR)/ 105C (TC) 105C (TR)/ 125C (TC) 105C (TR)/ 150C (TC) Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Rated voltage (UR) 2.5 4.0 6.3 8.0 10.0 12.5 16.0 20.0 25.0 35.0 50.0 63.0 75.0 Category voltage (UC) 1.7 2.7 4.2 5.4 6.7 8.4 10.7 13.4 16.8 23.5 33.5 42.2 50.3 Terms: Category voltage, UC : Maximum recommended peak DC operating voltage for continuous operation at the category temperature, TC. Rated voltage, U R : Maximum recommended peak DC operating voltage for continuous operation up to the rated temperature, TR. Category temperature, TC : Maximum recommended operating temperature. Voltage derating may be required at TC. Rated temperature, TR : Maximum recommended operating temperature without voltage derating. TR is equal to or lower than TC. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 4 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Certification KEMET's internal qualification plan for this polymer electrolytic series of capacitors follows AEC-Q200 guidelines. For T591 the humidity bias is limited to a maximum of 500 hours. For T597 and T598 the qualification plan is fully compliant with AEC-Q200 with maximum operational temperature of 125C. For T599 the qualification plan is fully compliant with AEC-Q200 with maximum operational temperature of 150C. Electrical Characteristics Capacitance vs. Frequency - T591 ESR vs. Frequency - T591 1,000 1,000 591B476M010_IMP 591B476M010_ESR 100 591D107M010_IMP 591D476M016_IMP 10 100 591D476M016_ESR 591V227M2R5_IMP Capacitance (F) Impedance, ESR (Ohms) 591D107M010_ESR 591V227M2R5_ESR 1 591D106M050_IMP 591D106M050_ESR 0.1 10 0.01 0.001 100 1,000 10,000 100,000 1,000,000 1 10,000,000 591B476M010_Cap (F) 591D106M050_Cap (F) 591D107M010_Cap (F) 591D476M016_Cap (F) 591V227M2R5_Cap (F) 100 1,000 10,000 Frequency (Hz) 1,000,000 10,000,000 Capacitance vs. Frequency - T597 ESR vs. Frequency - T597 IMPEDANCE_ESR vs Frequency Capacitance vs Frequency 100 1,000 47 F/6 V 33 F/6 V 22 F/6 V 22 F/10 V 10 Capacitance (F) 100 Impedance, ESR (Ohms) 100,000 Frequency (Hz) 1 10 0.1 1 100 1,000 10,000 100,000 1,000,000 Frequency (Hz) 0.01 100 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 5 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Electrical Characteristics cont. Capacitance vs. Frequency - T598 ESR vs. Frequency - T598 1,000 100 1 598B476M010_ESR 598D107M010_IMP 598D107M010_ESR 598D227M010_IMP 598D227M010_ESR 598D107M016_IMP 598D107M016_ESR 100 Capacitance (F) Impedance, ESR (Ohms) 10 598B476M010_IMP 0.1 10 1 0.01 0.001 100 1,000 10,000 100,000 1,000,000 0.1 100 10,000,000 598B47 F/10 V 598D100 F/10 598D100 F/16 598D220 F/10 1,000 Frequency (Hz) 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) Capacitance vs. Frequency - T599 ESR vs. Frequency - T599 100 100 T599X336M035_CAP T599X336M035_IMP 10 Capacitance (F) Impedance & ESR (0hms) T599X336M035_ESR 1 10 1 0.1 0.01 100 1,000 10,000 100,000 1,000,000 10,000,000 0.1 100 Frequency (Hz) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 1,000 10,000 100,000 1,000,000 10,000,000 Frequency (Hz) T2073_T59X * 3/6/2020 6 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Dimensions - Millimeters (Inches) Metric will govern T591 / T598 / T599 CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW BOTTOM VIEW A B W B Glue pad shape/design at KEMET's option H X T S S Case Size KEMET B D V X P Termination cutout at KEMET's option, either end R F L Typical Weight Component Dimensions EIA L 3.5 0.2 (0.138 0.008) 7.3 0.3 7343-31 (0.287 0.012) 7.3 0.3 7343-20 (0.287 0.012) 7.3 0.3 7343-43 (0.287 0.012) 3528-21 W H 2.8 0.2 (0.110 0.008) 4.3 0.3 (0.169 0.012) 4.3 0.3 (0.169 0.012) 4.3 0.3 (0.169 0.012) 1.9 0.2 (0.075 0.008) 2.8 0.3 (0.110 0.012) 1.9 0.1 (0.075 0.004) 4.0 0.3 (0.1570.012) F 0.1 S 0.3 B 0.15 (0.004) (0.012) (Ref) 0.006 2.2 (0.087) 2.4 (0.094) 2.4 (0.094) 2.4 (0.094) 0.8 (0.031) 1.3 (0.051) 1.3 (0.051) 1.3 (0.051) 0.4 (0.016) 0.5 (0.020) N/A 0.5 (0.020) X (Ref) P (Ref) R (Ref) T A (Ref) (Minimum) 0.10 0.10 0.5 (0.004 0.004) (0.020) 0.10 0.10 0.9 (0.004 0.004) (0.035) 0.05 N/A (0.002) 0.10 0.10 1.7 (0.004 0.004) (0.067) 1.0 (0.039) 1.0 (0.039) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) 0.13 (0.005) N/A 1.0 (0.039) (mg) 1.1 (0.043) 3.8 (0.150) 3.8 (0.150) 3.8 (0.150) 95 435 274 554 Notes: Reference (Ref) - Dimensions provided for reference only. For low profile cases, no dimensions are provided for B, P, or R, because these cases do not have a bevel or a notch. These weights are provided as reference. If exact weights are needed, please contact your KEMET sales representative. T597 END VIEW BOTTOM VIEW SIDE VIEW H F L W S Case Size KEMET S Component Dimensions EIA P 2012-10 S 3216-12 Weight L W H F 0.1 (0.004) S 0.2 (0.008) 2.0 0.2 (0.0790.008) 3.2 0.2 (0.126 0.008) 1.2 0.2 (0.0470.008) 1.6 0.2 (0.063 0.008) 0.9 0.1 (0.0350.004) 1.1 0.1 (0.043 0.004) 0.9 (0.035) 1.2 (0.047) 0.55 (0.022) 0.8 (0.031) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com (mg) 11.3 26.2 T2073_T59X * 3/6/2020 7 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 - Ratings & Part Number Reference Rated Voltage Rated Cap Case Code/ Case Size VDC at 105C F KEMET/EIA 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 6.3 100 100 220 220 220 220 470 100 220 220 220 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 D/7343-31 B/3528-21 V/7343-20 V/7343-20 B/3528-21 T591B107M2R5ATE055 T591B107M2R5ATE070 T591B227M2R5ATE025 T591V227M2R5ATE009 T591V227M2R5ATE012 T591V227M2R5ATE015 T591D477M2R5ATE009 T591B107M004ATE070 T591V227M004ATE018 T591V227M004ATE025 T591B227M006ATE035 25 25 55 55 55 55 117.5 40 88 88 139 2.5 2.5 2.5 2.5 2.5 2.5 2.5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 100 100 330 330 330 330 470 100 100 100 100 100 150 150 150 150 150 150 330 330 330 330 33 33 33 33 47 47 68 68 100 100 100 100 100 100 150 B/3528-21 B/3528-21 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 V/7343-20 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 T598B107M2R5ATE055 T598B107M2R5ATE070 T591V337M2R5ATE012 T591V337M2R5ATE025 T591D337M2R5ATE015 T591D337M2R5ATE018 T598D477M2R5ATE009 T598B107M004ATE045 T598B107M004ATE055 T598B107M004ATE070 T591B107M004ATE045 T591B107M004ATE055 T598B157M004ATE045 T598B157M004ATE055 T598B157M004ATE070 T591B157M004ATE045 T591B157M004ATE055 T591B157M004ATE070 T598V337M004ATE025 T598V337M004ATE045 T591V337M004ATE025 T591V337M004ATE045 T598B336M006ATE070 T598B336M006ATE080 T591B336M006ATE070 T591B336M006ATE080 T598B476M006ATE070 T591B476M006ATE070 T598B686M006ATE070 T591B686M006ATE070 T598B107M006ATE045 T598B107M006ATE055 T598B107M006ATE070 T591B107M006ATE045 T591B107M006ATE055 T591B107M006ATE070 T598B157M006ATE045 25 25 82.5 82.5 82.5 82.5 117.5 40 40 40 40 40 60 60 60 60 60 60 132 132 132 132 20.8 20.8 20.8 20.8 29.6 29.6 43 43 63 63 63 63 63 63 94.5 VDC at 105C F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 55 70 25 9 12 15 9 70 18 25 35 1,520 1,347 2,260 4,558 3,947 3,531 5,000 1,347 3,223 2,735 1,900 3 3 3 3 3 3 3 3 3 3 3 105 105 105 105 105 105 105 105 105 105 105 55 70 12 25 15 18 9 45 55 70 45 55 45 55 70 45 55 70 25 45 25 45 70 80 70 80 70 70 70 70 45 55 70 45 55 70 45 1,520 1,347 3,947 2,735 3,873 3,536 5,000 1,680 1,520 1,347 1,680 1,520 1,680 1,520 1,347 1,680 1,520 1,347 2,735 2,039 2,735 2,039 1,347 1,260 1,347 1,260 1,347 1,347 1,347 1,347 1,680 1,520 1,347 1,680 1,520 1,347 1,680 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 * * mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified ESR A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max 105C 8 8 8 10 10 10 10 10 10 10 8 125C 8 8 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 10 10 10 10 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF Maximum Allowable Ripple Current ESR * * * * * * * * * * * * * * * * * (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150C and T591 = limited to 500 hours at 85C/85% RH load. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 8 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 - Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105C F KEMET/EIA 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 150 150 150 150 150 150 150 150 150 150 150 150 150 220 220 220 220 220 220 220 220 220 220 220 220 330 330 330 330 330 330 33 33 33 33 47 47 100 100 100 100 100 100 100 100 100 100 150 150 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 VDC at 105C F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max T598B157M006ATE055 T598B157M006ATE070 T591B157M006ATE045 T591B157M006ATE055 T591B157M006ATE070 T598V157M006ATE025 T598V157M006ATE045 T591V157M006ATE025 T591V157M006ATE045 T598D157M006ATE025 T598D157M006ATE045 T591D157M006ATE025 T591D157M006ATE045 T591B227M006ATE045 T591B227M006ATE070 T598D227M006ATE025 T598D227M006ATE040 T598D227M006ATE080 T591D227M006ATE025 T591D227M006ATE040 T591D227M006ATE080 T598V227M006ATE025 T598V227M006ATE045 T591V227M006ATE025 T591V227M006ATE045 T598D337M006ATE025 T598D337M006ATE040 T598D337M006ATE080 T591D337M006ATE025 T591D337M006ATE040 T591D337M006ATE080 T598B336M010ATE070 T598B336M010ATE080 T591B336M010ATE070 T591B336M010ATE080 T598B476M010ATE070 T591B476M010ATE070 T598D107M010ATE025 T598D107M010ATE040 T598D107M010ATE080 T591D107M010ATE025 T591D107M010ATE040 T591D107M010ATE080 T598V107M010ATE025 T598V107M010ATE045 T591V107M010ATE025 T591V107M010ATE045 T598D157M010ATE025 T598D157M010ATE045 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 94.5 139 139 139 139 139 139 139 139 139 139 139 139 208 208 208 208 208 208 33 33 33 33 47 47 100 100 100 100 100 100 100 100 100 100 150 150 125C 8 8 8 8 8 10 10 10 10 10 10 10 10 8 8 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 10 10 10 55 70 45 55 70 25 45 25 45 25 45 25 45 45 70 25 40 80 25 40 80 25 45 25 45 25 40 80 25 40 80 70 80 70 80 70 70 25 40 80 25 40 80 25 45 25 45 25 45 A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 1,520 1,347 1,680 1,520 1,347 2,735 2,039 2,735 2,039 3,000 2,236 3,000 2,236 1,680 1,347 3,000 2,372 1,677 3,000 2,372 1,677 2,735 2,039 2,735 2,039 3,000 2,372 1,677 3,000 2,372 1,677 1,347 1,260 1,347 1,260 1,347 1,347 3,000 2,372 1,677 3,000 2,372 1,677 2,735 2,039 2,735 2,039 3,000 2,236 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 * * mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified * * * * * * * * * * * * * * * * * * * * * * (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150C and T591 = limited to 500 hours at 85C/85% RH load. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 9 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 - Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105C F KEMET/EIA 10 10 10 10 10 10 10 10 10 10 10 10 16 16 16 16 16 16 20 20 20 25 25 25 25 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 35 50 50 50 50 50 150 150 150 150 150 150 220 220 220 220 220 220 47 47 100 100 150 150 47 68 68 22 33 33 47 2.2 2.2 2.2 2.2 3.3 3.3 3.3 3.3 4.7 4.7 10 10 10 10 15 22 33 33 33 1.5 1.5 2.2 2.2 2.2 D/7343-31 D/7343-31 V/7343-20 V/7343-20 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 V/7343-20 V/7343-20 D/7343-31 D/7343-31 D/7343-31 D/7343-31 X/7343-43 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 VDC at 105C F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF ESR A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max T591D157M010ATE025 T591D157M010ATE045 T598V157M010ATE025 T598V157M010ATE045 T591V157M010ATE025 T591V157M010ATE045 T598D227M010ATE025 T598D227M010ATE040 T598D227M010ATE080 T591D227M010ATE025 T591D227M010ATE040 T591D227M010ATE080 T598D476M016ATE070 T591D476M016ATE070 T598D107M016ATE050 T591D107M016ATE050 T598D157M016ATE065 T591D157M016ATE065 T591D476M020ATE050 T591D686M020ATE040 T591D686M020ATE050 T591D226M025ATE060 T598D336M025ATE060 T591D336M025ATE060 T598D476M025ATE060 T598B225M035ATE150 T591B225M035ATE150 T598B225M035ATE200 T591B225M035ATE200 T598B335M035ATE150 T591B335M035ATE150 T598B335M035ATE200 T591B335M035ATE200 T598B475M035ATE200 T591B475M035ATE200 T598D106M035ATE120 T591D106M035ATE120 T598V106M035ATE120 T591V106M035ATE120 T598D156M035ATE065 T598D226M035ATE065 T598D336M035ATE065 T591D336M035ATE065 T598X336M035ATE065 T598B155(1)050ATE200 T591B155(1)050ATE200 T598B225M050ATE150 T598B225M050ATE200 T591B225M050ATE150 150 150 150 150 150 150 220 220 220 220 220 220 75.2 75.2 160 160 240 240 94 136 136 55 82.5 82.5 117.5 7.7 7.7 7.7 7.7 11.6 11.6 11.6 11.6 16.5 16.5 35 35 35 35 52.5 77 115.5 115.5 115.5 7.5 7.5 11 11 11 125C 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8 8 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 10 8 8 8 8 8 25 45 25 45 25 45 25 40 80 25 40 80 70 70 50 50 65 65 50 40 50 60 60 60 60 150 150 200 200 150 150 200 200 200 200 120 120 120 120 65 65 65 65 65 200 200 150 200 150 A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF ESR Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 3,000 2,236 2,735 2,236 2,735 2,236 3,000 2,372 1,677 3,000 2,372 1,677 1,793 1,793 2,121 2,121 1,900 1,900 2,121 2,372 2,121 1,936 1,936 1,936 1,936 920 920 797 797 920 920 797 797 797 797 1,369 1,369 1,248 1,248 1,900 1,900 1,900 1,900 1,949 797 797 920 797 920 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 125 mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified * * * * * * * * * * * * * * * * * * * * * * * * (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150C and T591 = limited to 500 hours at 85C/85% RH load. Refer to Ordering Information for additional detail. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 10 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 1 - Ratings & Part Number Reference cont. Rated Voltage Rated Cap Case Code/ Case Size VDC at 105C F KEMET/EIA 50 50 50 2.2 10 10 B/3528-21 D/7343-31 D/7343-31 T591B225M050ATE200 T598D106M050ATE090 T591D106M050ATE090 4 4 4 4 4 4 4 4 6.3 6.3 6.3 6.3 6.3 6.3 10 10 10 35 33 33 47 47 68 68 150 150 33 33 47 47 150 150 33 33 33 33 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 B/3528-21 D/7343-31 D/7343-31 B/3528-21 B/3528-21 B/3528-21 X/7343-43 T599B336M004ATE070 T599B336M004ATE090 T599B476M004ATE070 T599B476M004ATE090 T599B686M004ATE070 T599B686M004ATE090 T599D157M004ATE025 T599D157M004ATE045 T599B336M006ATE070 T599B336M006ATE090 T599B476M006ATE070 T599B476M006ATE090 T599D157M006ATE025 T599D157M006ATE045 T599B336M010ATE070 T599B336M010ATE090 T599B336M010ATE150 T599X336M035ATE065 2.5 6.3 6.3 6.3 6.3 6.3 10 100 22 33 33 47 47 22 S/3216-12 P/2012-10 S/3216-12 S/3216-12 S/3216-12 S/3216-12 S/3216-12 T597S107M2R5APE100 T597P226M006APE200 T597S336M006APE100 T597S336M006APE200 T597S476M006APE100 T597S476M006APE200 T597S226M010APE200 VDC at 105C F KEMET/EIA Rated Voltage Rated Cap Case Code/ Case Size KEMET Part Number DC Leakage DF MSL Maximum Operating Temp AEC-Q200 Qualified (rms) mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 200 90 90 797 1,581 1,581 3 3 3 125 125 125 * 70 90 70 90 70 90 25 45 70 90 70 90 25 45 70 90 150 65 1,347 1,188 1,347 1,188 1,347 1,188 3,000 2,236 1,347 1,188 1,347 1,188 3,000 2,236 1,347 1,188 920 1949 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 3 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 150 * * * * * * * * * * * * * * * * * * 100 200 100 200 100 200 200 770 354 770 570 770 570 570 3 3 3 3 3 3 3 125 125 125 125 125 125 125 * * * * * * * mA at +45C 100 kHz Reflow Temp 260C C T598/T599 Only1 Maximum Allowable Ripple Current MSL Maximum Operating Temp AEC-Q200 Qualified ESR A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max 125C 8 10 10 150C 13.2 8 13.2 8 18.8 8 18.8 8 27.2 8 27.2 8 60 10 60 10 20.8 8 20.8 8 29.6 8 29.6 8 94.5 10 94.5 10 33 8 33 8 33 8 115.5 10 Facedown Construction 75 10 41.6 10 62.4 10 62.4 10 88.8 10 88.8 10 66 10 11 50 50 A at +25C % at +25C m at +25C Max/5 Minutes 120 Hz Max 100 kHz Max KEMET Part Number DC Leakage DF Maximum Allowable Ripple Current ESR (1) To complete KEMET part number, insert M for 20% or K for 10%. Designates capacitance tolerance. 1 T598 = AEC-Q200 qualified. T599 AEC-Q200 qualified 150C and T591 = limited to 500 hours at 85C/85% RH load. Refer to Ordering Information for additional detail. Part Numbers marked in blue font are "Under Development." Engineering samples available upon request. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 11 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Derating Guidelines 125C 150C 100% 100% 95% Rated Voltage 95% Recommended Application Voltage VR 10 V 80% 75% 70% Recommended Application Voltage VR 16 V 65% 67% 60% 60% 55% 50% % Rated Voltage % Rated Voltage 85% Rated Voltage 90% 90% 54% -55 25 45 85 105 125 Temperature (C) 85% Recommended Application Voltage VR 10 V 80% 75% Recommended Application Voltage VR 16 V 70% 67% 65% 60% 60% 55% 50% 54% -55 25 45 85 105 125 150 Temperature (C) Recommended Application Voltage KO-CAPs are solid state capacitors that demonstrate no wearout mechanism when operated within their recommended guidelines. While the KO-CAP can be operated at full rated voltage, most circuit designers seek a minimum level of assurance in long term reliability, which should be demonstrated with data. A voltage derating can provide the desired level of demonstrated reliability based on industry accepted acceleration models. Since most applications do require long term reliability, KEMET recommends that designers consider a voltage derating, according the graph above, for the maximum steady state voltage. Voltage Rating Maximum Recommended Steady State Voltage -55C to 105C 105C to 125C (T598) 105C to 150C (T599) 2.5 V VR 10 V 90% of VR 60% of VR 60% of VR VR 16 V 80% of VR 54% of VR 54% of VR VR = Rated voltage (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 12 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Ripple Current/Ripple Voltage Permissible AC ripple voltage and current are related to equivalent series resistance (ESR) and the power dissipation capabilities of the device. Permissible AC ripple voltage which may be applied is limited by two criteria: 1. The positive peak AC voltage plus the DC bias voltage, if any, must not exceed the DC voltage rating of the capacitor. 2. The negative peak AC voltage in combination with bias voltage, if any, must not exceed the allowable limits specified for reverse voltage. See the Reverse Voltage section for allowable limits. The maximum power dissipation by case size can be determined using the table at right. The maximum power dissipation rating stated in the table must be reduced with increasing environmental operating temperatures. Refer to the table below for temperature compensation requirements. Case Code EIA Case Code Maximum Power Dissipation (Pmax) mWatts at 45C with +30C Rise B D P S V X 3528-21 7343-31 2012-10 3216-12 7343-20 7343-43 127 225 25 60 187 247 Using the Pmax of the device, the maximum allowable rms ripple current or voltage may be determined. I(max) = Pmax/R E(max) = Z Pmax/R I = rms ripple current (amperes) E = rms ripple voltage (volts) Pmax = maximum power dissipation (watts) R = ESR at specified frequency (ohms) Z = Impedance at specified frequency (ohms) Temperature Compensation Multipliers for Maximum Ripple Current T 45C 45C < T 85C 85C < T 105C T 125C 1.00 0.70 0.25 0.25 T = Environmental temperature T 150C 0.20 The maximum power dissipation rating must be reduced with increasing environmental operating temperatures. Refer to the Temperature Compensation Multiplier table for details. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 13 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Surge Voltage Surge voltage is the maximum voltage (peak value) which may be applied to the capacitor. The surge voltage must not be applied for periodic charging and discharging in course of normal operation and cannot be part of the application voltage. Surge voltage capability is demonstrated by application of 1,000 cycles at operating temperature. The parts are charged through a 33 Ohm resistor for 30 seconds and then discharged though a 33 Ohm resistor for each cycle. Rated Voltage (V) Surge Voltage (V) Category Voltage (V) -55C to 105C Category Surge Voltage (V) Category Voltage (V) up to 125C Category Surge Voltage (V) up to 150C* 2.5 6.3 10 16 20 3.3 8.2 13 20.8 26 1.7 4.2 6.7 10.7 13.4 2.2 5.5 8.7 13.9 17.4 1.7 4.2 6.7 10.7 13.4 2.2 5.5 8.7 13.9 17.4 25 35 50 32.5 45.5 65 16.8 23.5 33.5 21.8 30.5 43.6 16.8 23.5 33.5 21.8 30.5 43.6 *T599 Only Reverse Voltage Polymer electrolytic capacitors are polar devices and may be permanently damaged or destroyed if connected in the wrong polarity. These devices will withstand a small degree of transient voltage reversal for short periods as shown in the below table. Temperature Permissible Transient Reverse Voltage 25C 55C 85C 105C 125C* 150C** 15% of rated voltage 10% of rated voltage 5% of rated voltage 3% of rated voltage 1% of rated voltage 1% of rated voltage *For series rated to 125C ** For series rated to 150C (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 14 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Table 2 - Land Dimensions/Courtyard T591 / T598 / T599 Metric Size Code KEMET Density Level A: Maximum (Most) Land Protrusion (mm) Density Level B: Median (Nominal) Land Protrusion (mm) Density Level C: Minimum (Least) Land Protrusion (mm) Case EIA W L S V1 V2 W L S V1 V2 W L S V1 V2 B D V X 3528-21 7343-31 7343-21 7343-43 2.35 2.55 2.55 2.55 2.21 2.77 2.77 2.77 0.92 3.67 3.67 3.67 6.32 10.22 10.22 10.22 4.00 5.60 5.60 5.60 2.23 2.43 2.43 2.43 1.80 2.37 2.37 2.37 1.12 3.87 3.87 3.87 5.22 9.12 9.12 9.12 3.50 5.10 5.10 5.10 2.13 2.33 2.33 2.33 1.42 1.99 1.99 1.99 1.28 4.03 4.03 4.03 4.36 8.26 8.26 8.26 3.24 4.84 4.84 4.84 Density Level A: For low-density product applications. Recommended for wave solder applications and provides a wider process window for reflow solder processes. Density Level B: For products with a moderate level of component density. Provides a robust solder attachment condition for reflow solder processes. Density Level C: For high component density product applications. Before adapting the minimum land pattern variations the user should perform qualification testing based on the conditions outlined in IPC standard 7351 (IPC-7351). 1 Height of these chips may create problems in wave soldering. 2 Land pattern geometry is too small for silkscreen outline. V1 L L W V2 W S Grid Placement Courtyard T597 KEMET Metric Size Code Dimensions (mm) Minimum - Maximum Case EIA G Z X Y I S P 3216-10 3216-12 2012-10 1.00 - 1.65 1.00 - 1.65 0.40 - 1.05 3.25 - 3.80 3.25 - 3.80 2.05 - 2.60 1.1 - 1.30 1.1 - 1.30 0.80 - 1.00 0.8 - 1.40 0.8 - 1.40 0.5 - 1.1 X X Y G Z Y (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 15 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Soldering Process Please note that although the X/7343-43 case size can withstand wave soldering, the tall profile (4.3 mm maximum) dictates care in wave process development. Hand soldering should be performed with care due to the difficulty in process control. If performed, care should be taken to avoid contact of the soldering iron to the molded case. The iron should be used to heat the solder pad, applying solder between the pad and the termination, until reflow occurs. Once reflow occurs, the iron should be removed immediately. "Wiping" the edges of a chip and heating the top surface is not recommended. Profile Feature SnPb Assembly Pb-Free Assembly Preheat/Soak Temperature Minimum (TSmin) 100C 150C Temperature Maximum (TSmax) 150C 200C Time (ts) from Tsmin to Tsmax) 60 - 120 seconds 60 - 120 seconds Ramp-up Rate (TL to TP) 3C/second maximum 3C/second maximum Liquidous Temperature (TL) 183C 217C Time Above Liquidous (tL) 60 - 150 seconds 220C* 235C** 60 - 150 seconds 250C* 260C** 20 seconds maximum 30 seconds maximum 6C/second maximum 6C/second maximum 6 minutes maximum 8 minutes maximum Peak Temperature (TP) Time within 5C of Maximum Peak Temperature (tP) Ramp-down Rate (TP to TL) Time 25C to Peak Temperature Note: All temperatures refer to the center of the package, measured on the package body surface that is facing up during assembly reflow. * For Case Size height > 2.5 mm ** For Case Size height 2.5 mm TP TL Temperature KEMET's families of surface mount capacitors are compatible with wave (single or dual), convection, IR, or vapor phase reflow techniques. Preheating of these components is recommended to avoid extreme thermal stress. KEMET's recommended profile conditions for convection and IR reflow reflect the profile conditions of the IPC/J-STD-020D standard for moisture sensitivity testing. The devices can safely withstand a maximum of three reflow passes at these conditions. tP Maximum Ramp-up Rate = 3C/second Maximum Ramp-down Rate = 6C/second tL Tsmax Tsmin 25 ts 25C to Peak Time Storage All KO-CAP capacitors are shipped in moisture barrier bags (MBBs) with desiccant and humidity indicator card (HIC). These parts are classified as moisture sensitivity level 3 (MSL3) per IPC/JEDEC J-STD-020 and packaged per IPC/JEDEC J-STD-033, MSL3 specifies a floor time of 168 H at 30C maximum temperature and 60% relative humidity. Unused capacitors should be sealed in a MBB with fresh desiccant. Calculated shelf life in sealed bag: - 12 months from bag seal date in a storage environment of < 40C and humidity < 90% RH - 24 months from bag seal date in a storage environment of < 30C and humidity < 70% RH If baking is required, refer to IPC/JEDEC J-STD-033 for bake procedure. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 16 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Construction T591 / T598 / T599 Polarity Stripe (+) Molded Epoxy Case Detailed Cross Section Silver Paint (Fourth Layer) Polarity Bevel (+) Wire Leadframe (- Cathode) Wire Weld (to attach wire) Carbon (Third Layer) Silver Adhesive Leadframe (+ Anode) Molded Epoxy Case Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum T597 Polarity Stripe (+) Detailed Cross Section Carbon (Third Layer) Silver Paint (Fourth Layer) Molded Epoxy Case Wire Wire Spacer Leadframe (- Cathode) Silver Adhesive Weld (to attach wire) Polymer (Second Layer) Ta2O5 Dielectric (First Layer) Tantalum Leadframe (+ Anode) (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 17 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Capacitor Marking T591/ T598 / T599 Date Code * Polarity Indicator (+) Picofarad Code KEMET ID Rated Voltage 1 digit = Last number of year 6 = 2016 7 = 2017 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = Week of the year 01 = 1st week of the year to 52 = 52nd week of the year st Date Code* * 822 = 14th week of 2018 T597 Voltage Code e j A 2.5 V 6.3 V 10 V Automotive Grade ID Date Code* Voltage and Capacitance Code Capacitance Code J7 N7 S7 A8 22 33 47 100 Date Code * * 008 = 6th week of 2020 (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com 1st digit = Last number of year 8 = 2018 9 = 2019 0 = 2020 2nd and 3rd digit = Week of the year 01 = 1st week of the year to 52 = 52nd week of the year T2073_T59X * 3/6/2020 18 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Tape & Reel Packaging Information KEMET's molded chip capacitor families are packaged in 8 and 12 mm plastic tape on 7" and 13" reels in accordance with EIA Standard 481: Embossed Carrier Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape-fed automatic pick-and-place systems. Right hand orientation only (+) Embossed carrier (-) Embossment Top tape thickness 0.10 mm (0.004") maximum thickness 180 mm (7.0") or 330 mm (13.") 8 mm (0.315") or 12 mm (0.472") Table 3 - Packaging Quantity Case Code KEMET P R I S A T M B U L C Q W Z V D Y X J H O EIA 2012-10 2012-12 3216-10 3216-12 3216-18 3528-12 3528-15 3528-21 6032-15 6032-19 6032-28 7343-12 7343-15 7343-17 7343-19 7343-31 7343-40 7343-43 7360-15 7360-20 7360-43 Tape Width (mm) 7" Reel* 13" Reel* 8 8 8 8 8 8 8 8 12 12 12 12 12 12 12 12 12 12 12 12 12 3,000 2,500 3,000 3,000 2,000 3,000 2,500 2,000 1,000 1,000 500 1,000 1,000 1,000 1,000 500 500 500 1,000 1,000 250 N/A 10,000 N/A N/A N/A 10,000 8,000 8,000 5,000 3,000 3,000 3,000 3,000 3,000 3,000 2,500 2,000 2,000 3,000 3,000 1,000 * No C-Spec required for 7" reel packaging. C-7280 required for 13" reel packaging. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 19 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 1 - Embossed (Plastic) Carrier Tape Dimensions P2 T T2 OD0 P0 (10 pitches cumulative tolerance on tape 0.2 mm) A0 E1 F K0 B1 E2 B0 S1 W P1 T1 Center Lines of Cavity B1 is for tape feeder reference only, including draft concentric about B0. Embossment For cavity size, see Note 1, Table 4 OD1 Cover Tape User Direction of Unreeling Table 4 - Embossed (Plastic) Carrier Tape Dimensions Metricwillgovern Constant Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm D1 Minimum Note 1 D0 1.5+0.10/-0.0 (0.059+0.004/-0.0) 1.0 (0.039) 1.5 (0.059) E1 P0 RReference S1 Minimum T1 T Maximum Note 2 Note 3 Maximum P2 1.75 0.10 4.0 0.10 2.0 0.05 (0.069 0.004) (0.157 0.004) (0.079 0.002) 25.0 (0.984) 30 (1.181) 0.600 (0.024) 0.600 (0.024) 0.100 (0.004) Variable Dimensions -- Millimeters (Inches) Tape Size Pitch B1 Maximum Note 4 8 mm Single(4mm) 4.35 (0.171) 6.25 (0.246) 12 mm Single(4mm) andDouble (8 mm) 8.2 (0.323) 10.25 (0.404) E2 Minimum F P1 3.5 0.05 2.0 0.05 or 4.0 0.10 (0.138 0.002) (0.079 0.002 or 0.157 0.004) 2.0 0.05 (0.079 0.002) or 5.5 0.05 4.0 0.10 (0.157 0.004) or (0.217 0.002) 8.0 0.10 (0.315 0.004) T2 Maximum WMaximum A0, B0 & K0 2.5 (0.098) 8.3 (0.327) 4.6 (0.181) 12.3 (0.484) Note 5 1. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 2. The tape, with or without components, shall pass around R without damage (see Figure 4). 3. If S1 < 1.0 mm, there may not be enough area for cover tape to be properly applied (see EIA Standard 481-D, paragraph 4.3, section b). 4. B1 dimension is a reference dimension for tape feeder clearance only. 5. The cavity defined by A0, B0 and K0 shall surround the component with sufficient clearance that: (a) the component does not protrude above the top surface of the carrier tape. (b) the component can be removed from the cavity in a vertical direction without mechanical restriction, after the top cover tape has been removed. (c) rotation of the component is limited to 20 maximum for 8 and 12 mm tapes (see Figure 2). (d) lateral movement of the component is restricted to 0.5 mm maximum for 8 mm and 12 mm wide tape (see Figure 3). (e) see Addendum in EIA Standard 481-D for standards relating to more precise taping requirements. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 20 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Packaging Information Performance Notes 1. Cover tape break force:1.0kgminimum. 2. Cover tape peel strength: Thetotalpeelstrengthofthecovertapefromthecarriertapeshallbe: Tape Width Peel Strength 8 mm 0.1to1.0newton(10to100gf) 12 mm 0.1to1.3newton(10to130gf) Thedirectionofthepullshallbeoppositethedirectionofthecarriertapetravel.Thepullangleofthecarriertapeshallbe 165to180fromtheplaneofthecarriertape.Duringpeeling,thecarrierand/orcovertapeshallbepulledatavelocityof 300 10 mm/minute. 3. Labeling:Barcodelabeling(standardorcustom)shallbeonthesideofthereeloppositethesprocketholes.Refer to EIA Standards 556 and 624. Figure 2 - Maximum Component Rotation T Maximum Component Rotation Top View Maximum Component Rotation Side View Typical Pocket Centerline Tape Width (mm) 8, 12 Bo Maximum Rotation ( 20 T) s Tape Maximum Width (mm) Rotation ( 8, 12 20 Typical Component Centerline S) Ao Figure 3 - Maximum Lateral Movement Figure 4 - Bending Radius 8 mm & 12 mm Tape 0.5 mm maximum 0.5 mm maximum Embossed Carrier Punched Carrier R (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com Bending Radius R T2073_T59X * 3/6/2020 21 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 5 - Reel Dimensions Full Radius, See Note W3 (Includes flange distortion at outer edge) Access Hole at Slot Location (O 40 mm minimum) W2 D A (See Note) N C (Arbor hole diameter) B (see Note) (Measured at hub) W1 (Measured at hub) If present, tape slot in core for tape start: 2.5 mm minimum width x 10.0 mm minimum depth Note: Drive spokes optional; if used, dimensions B and D shall apply. Table 5 - Reel Dimensions Metricwillgovern Constant Dimensions -- Millimeters (Inches) Tape Size A B Minimum C D Minimum 8 mm 178 0.20 (7.008 0.008) or 330 0.20 (13.000 0.008) 1.5 (0.059) 13.0+0.5/-0.2 (0.521+0.02/-0.008) 20.2 (0.795) 12 mm Variable Dimensions -- Millimeters (Inches) Tape Size 8 mm 12 mm N Minimum W1 W2 Maximum W3 50 (1.969) 8.4+1.5/-0.0 (0.331+0.059/-0.0) 12.4+2.0/-0.0 (0.488+0.078/-0.0) 14.4 (0.567) 18.4 (0.724) Shall accommodate tape widthwithoutinterference (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 22 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC Figure 6 - Tape Leader & Trailer Dimensions Embossed Carrier Punched Carrier 8 mm & 12 mm only END Carrier Tape Round Sprocket Holes START Top Cover Tape Elongated Sprocket Holes (32 mm tape and wider) Trailer 160 mm minimum Components 100 mm minimum Leader 400 mm minimum Top Cover Tape Figure 7 - Maximum Camber Elongated Sprocket Holes (32 mm & wider tapes) Carrier Tape Round Sprocket Holes 1 mm maximum, either direction Straight Edge 250 mm (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 23 KEMET Organic Capacitor (KO-CAP (R)) - Automotive Grade T591, T598, T597, and T599 High Humidity and High Temperature Automotive Grade Polymer Electrolytic, 2.5 - 50 VDC KEMET Electronics Corporation Sales Offices Foracompletelistofourglobalsalesoffices,pleasevisitwww.kemet.com/sales. Disclaimer Allproductspecifications,statements,informationanddata(collectively,the"Information")inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied. StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation's("KEMET")knowledgeoftypicaloperatingconditionsforsuch applications,butarenotintendedtoconstitute-andKEMETspecificallydisclaims-anywarrantyconcerningsuitabilityforaspecificcustomerapplicationoruse. TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any technicaladviceinferredfromthisInformationorotherwiseprovidedbyKEMETwithreferencetotheuseofKEMET'sproductsisgivengratis,andKEMETassumes noobligationorliabilityfortheadvicegivenorresultsobtained. AlthoughKEMETdesignsandmanufacturesitsproductstothemoststringentqualityandsafetystandards,giventhecurrentstateoftheart,isolatedcomponent failuresmaystilloccur.Accordingly,customerapplicationswhichrequireahighdegreeofreliabilityorsafetyshouldemploysuitabledesignsorothersafeguards (suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury orpropertydamage. Althoughallproduct-relatedwarnings,cautionsandnotesmustbeobserved,thecustomershouldnotassumethatallsafetymeasuresareindictedorthatother measuresmaynotberequired. KEMET is a registered trademark of KEMET Electronics Corporation. (c) KEMET Electronics Corporation * KEMET Tower * One East Broward Boulevard Fort Lauderdale, FL 33301 USA * 954-766-2800 * www.kemet.com T2073_T59X * 3/6/2020 24