© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4004 06/10
Overview
KEMET is approved to DSCC (Defense Supply Center, Columbus)
drawing no. 03028 for surface mount EIA 0603 case size multi-
layer ceramic capacitors (MLCCs) in BR and BX dielectrics.
DSCC MLCC control drawings are managed by the Defense
Logistics Agency (DLA) and represent devices with case
sizes, voltage ratings, and capacitance offerings not currently
referenced in a valid military specifi cation. Approved devices
must meet the stringent requirements, specifi cations and
standards outlined by DSCC.
EIA SIZE
CODE
METRIC
SIZE CODE
L
LENGTH^
W
WIDTH^
B
BANDWIDTH
T
THICKNESS
Maximum
0603 1608 1.60 (.063) ± 0.15 (.006) 0.81 (.032) ± 0.15 (.006) 0.36 (.014) ± 0.15 (.006) 0.91 (.036)
^For symbol “U” termination add .20 inches (0.51mm) to the positive length tolerance and .015 inches (0.38mm) to the positive width and thickness tolerances.
Dimensions - Millimeters (Inches)
Outline Drawing
Surface Mount Multilayer Ceramic Chip Capacitors
DSCC Approved 03028 (BR/BX Dielectrics)
Benefi ts
• EIA 0603 case size
• Defense Supply Center, Columbus approved
• Federal Stock Control Number, Cage Code 31433
• Meets US Department of Defense (USDoD) specifi cations
per MIL-PRF-55681
• Meets USDoD standards per MIL-STD-202 & MIL-STD-1285
• High reliability
• Surface mount device
• Non-polar
Applications
Typical applications include decoupling, bypass, fi ltering, blocking
and energy storage for use in military and aerospace applications.
B
Electrodes
Conductive Metallization
Nickel Plate
70Sn/30Pb
C
N
DSCC drawing no. 03028 was developed in response to the
growing need and demand within the defense and aerospace
industries for EIA 0603 case size MLCCs not currently offered
in MIL-PRF-55681. KEMET’s DSCC approved capacitors
meet the requirements, specifi cations and standards outlined
in drawing no. 03028 as well as all referenced provisions per
MIL-PRF-55681.
Ordering Information
03028 BX 104 Y J Z C 7189
DSCC Drawing
Number Dielectric Capacitance
Code (pF) Voltage Capacitance
Tolerance
End
Metallization^
Group C
Testing Option
Packaging/Grade
(C-Spec)*
03028 (0603 case size) BR 2 Sig. Digits + W = 6.3V J = ±5% U = SnPb (4% min) Blank = No group C testing Blank = Waffl e Pack
BX Number of X = 10V K = ±10% Z = SnPb (4% min) C = Full group C 7189 = 7” Reel
Zeros Y = 16V M = ±20% L = 2,000 hour life test only
Z = 25V M = 1,000 hour life test only
A = 50V H = Low voltage humidity only
B = 100V
C = 200V
^ “U” = Base metallization-barrier metal-solder coated (tin/lead alloy, with a min of 4% lead). Melting point is +200ºC or less. Metallization thickness is ≥ 60μ-inches.
^ “Z” = Base metallization-barrier metal-tinned (tin/lead alloy, with a min of 4% lead).
* Additional reeling or packaging options may be available. Contact KEMET for details.
Additional termination options may be available. Contact KEMET for details.
DSCC Approved 03028 (BR/BX Dielectrics)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4005 06/10
Electrical Parameters/Characteristics: BR Dielectric
Qualifi cation/Certifi cation
Qualifi cation Inspection per MIL-PRF-55681
Inspection Test method paragraph
Group I
Voltage conditioning 4.8.3
DWV 4.8.9
IR (elevated temperature) 4.8.6
Capacitance 4.8.4
Dissipation factor 4.8.5
IR 4.8.6
DWV 4.8.9
Visual and mechanical examination 4.8.2
Group II
Solderability 4.8.10
Group III
Voltage-temperature limits 4.8.11
Thermal shock and immersion 4.8.12
Group IV
Resistance to soldering heat 4.8.13
Moisture resistance 4.8.14
Group V
Life (at elevated ambient temperature) 4.8.16
Group VIII
Humidity, steady state, low voltage 4.8.15
Operating Temperature Range -55°C to +125°C
Capacitance Change with Reference to +25°C and 0 Vdc Applied: ±15%
Capacitance Change with Reference to +25°C and 100% Rated Vdc Applied: +15%, -40%
Aging Rate (Max % Cap Loss/Decade Hour) 1%
Dielectric Withstanding Voltage 250%
Dissipation Factor (DF%) Maximum Limits @ 25ºC 5% (10V), 3.5% (16V & 25V) and 2.5% (50V to 200V)
Insulation Resistance (IR) Limit @ 25°C
Insulation Resistance (IR) Limit @ 125°C
1000 megohm microfarads (minimum) or 100GΩ
100 megohm microfarads (minimum) or 10GΩ
To obtain the IR limit, divide MΩ-μF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and Dissipation Factor (DF) measured under the following conditions:
1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance >1000pF
Electrical Parameters/Characteristics: BX Dielectric
Operating Temperature Range -55°C to +125°C
Capacitance Change with Reference to +25°C and 0 Vdc Applied: ±15%
Capacitance Change with Reference to +25°C and 100% Rated Vdc Applied: +15%, -25%
Aging Rate (Max % Cap Loss/Decade Hour) 1%
Dielectric Withstanding Voltage 250%
Dissipation Factor (DF%) Maximum Limits @ 25ºC 5% (10V), 3.5% (16V & 25V) and 2.5% (50V to 200V)
Insulation Resistance (IR) Limit @ 25°C
Insulation Resistance (IR) Limit @ 125°C
1000 megohm microfarads (minimum) or 100GΩ
100 megohm microfarads (minimum) or 10GΩ
To obtain the IR limit, divide MΩ-μF value by the capacitance and compare to GΩ limit. Select the lower of the two limits.
Capacitance and Dissipation Factor (DF) measured under the following conditions:
1kHz ± 50Hz and 1.0 ± 0.2 Vrms if capacitance >1000pF
DSCC Approved 03028 (BR/BX Dielectrics)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4005 06/10
Freq (Hz)
Magnitude Ohms
1041051061071081091010
10-2
10-1
100
101
102
103
104
ESR
Z
-40
-30
-20
-10
0
10
-55 -35 -15 5 25 45 65 85 105 125
ΔC/C (%)
Temperature (°C)
0 VDC
200 VDC
ESR
Z
1041051061071081091010
10-2
10-1
100
101
102
103
104
Freq (Hz)
Magnitude Ohms
Z & ESR - 0603, 0.1μF, 16V, BX
-40
-30
-20
-10
0
10
-55 -35 -15 5 25 45 65 85 105 125
ΔC/C (%)
Temperature (°C)
0 VDC
16 VDC
TCVC - 0603, 0.1μF, 16V, BX
Electrical Characteristics
Z & ESR - 0603, 1000pF, 200V, BR TCVC - 0603, 1000pF, 200V, BR
ESR
Z
Freq (Hz)
Magnitude Ohms
1041051061071081091010
10-2
10-1
100
101
102
103
104
-40
-30
-20
-10
0
10
-55 -35 -15 5 25 45 65 85 105 125
Δ
C/C (%)
Temperature (°C)
0 VDC
25 VDC
Z & ESR - 0603, 0.047μF, 25V, BR TCVC - 0603, 0.047μF, 25V, BR
DSCC Approved 03028 (BR/BX Dielectrics)
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 (864) 963-6300 • www.kemet.com F4005 06/10
Packaging Quantities
Soldering Process
All parts incorporate the standard KEMET barrier layer of pure nickel with a tin-lead (SnPb) fi nish. Both “U” and “Z” termination fi nishes
contain a minimum of 4% lead.
Marking
Marking is not available for DSCC approved EIA 0603 case size capacitors. These chips will be supplied unmarked.
CHIP SIZE (EIA) TAPE SIZE BULK QUANTITY 7” REEL QUANTITY
WAFFLE PACKAGING (Default) PAPER TAPE
0603 8mm 100 4,000
Please refer to the “Ordering Information” section of this document for packaging ordering information.
Capacitance
pF Cap
Code
DSCC DRAWING NO. 03028
DIELECTRIC BR BX
Voltage
6.3V
10V
16V
25V
50V
100V
200V
6.3V
10V
16V
25V
50V
100V
200V
Voltage Code W X Y Z A B C W X Y Z A B C
Cap Tolerance EIA 0603 CASE SIZE
100 101 J K M •••••••••••••
120 121 J K M •••••••••••••
150 151 J K M •••••••••••••
180 181 J K M •••••••••••••
220 221 J K M •••••••••••••
270 271 J K M •••••••••••••
330 331 J K M •••••••••••••
390 391 J K M •••••••••••••
470 471 J K M •••••••••••••
560 561 J K M •••••••••••••
680 681 J K M •••••••••••••
820 821 J K M •••••••••••••
1,000 102 J K M •••••••••••••
1,200 122 J K M •••••• •••••
1,500 152 J K M •••••• •••••
1,800 182 J K M •••••• •••••
2,200 222 J K M •••••• •••••
2,700 272 J K M •••••• •••••
3,300 332 J K M •••••• •••••
3,900 392 J K M •••••• •••••
4,700 472 J K M •••••• •••••
5,600 562 J K M ••••• ••••
6,800 682 J K M ••••• ••••
8,200 822 J K M ••••• ••••
10,000 103 J K M ••••• ••••
12,000 123 J K M ••••• ••••
15,000 153 J K M ••••• ••••
18,000 183 J K M ••••• ••••
22,000 223 J K M ••••• ••••
27,000 273 J K M •••• •••
33,000 333 J K M •••• •••
39,000 393 J K M •••••••
47,000 473 J K M •••••••
56,000 563 J K M ••• •••
68,000 683 J K M ••• •••
82,000 823 J K M ••• •••
100,000 104 J K M ••• •••
120,000 124 J K M
150,000 154 J K M
180,000 184 J K M
220,000 224 J K M
