T To Customer P/N UDE P/N BS-R250210 Description RJ45 1X1 Tab Up SMT 10/100 Base-T Contact Area : 50" Gold LED L G LED:L-Green;R-Yellow R Y ll Spec No. BS-0210 Approved Checked Update Date 2011/8/19 Prepared BS-R250210 Spec No. : BS-0210 1. MECHANICAL DIMENSION 1.1 Product Dimension 2011/8/19 General Tolerance : -1- X.X : 0.38 X XX : 0 25 X.XX 0.25 www.ude-corp.com BS-R250210 Spec No. : BS-0210 1.2 Recommened PCB Layout Component Side of Board p All dimension tolerance are 0.05mm unless otherwise specified 2011/8/19 -2- www.ude-corp.com BS-R250210 Spec No. : BS-0210 1.3 Standard RJ45 Plug Specification - All dimensions follow : FCC subpart F, 68,500, Figure (C)(2)(i) & (C)(2)(ii) & (C)(3)(i) IEC 60603-7 - All plugs must be meeting the requirements of plug Go & No-Go No Go gauge. Gauge follow : FCC subpart F, 68,500, Figure (C)(4)(i) & (C)(5)(i) - There must be no damage to Housing and Locking Lctch. - There must be no nicks and cuts in cable. - Durability : 750 cycles generally 2011/8/19 -3- www.ude-corp.com BS-R250210 Spec No. : BS-0210 2. REQUIREMENTS 2.1 Design g and Construction Product shall be of design, construction and physical dimensions specified on applicable. 2.2 Material 2.2.1 Terminal Parts (Underplating : 30"min. Nickel overall) 2.2.1.1 RJ Terminal : PH. Bronze, Thickness=0.30mm Finish : Contact Area : 50" Gold 2.2.1.2 Input Terminal : Brass, Thickness=0.25mm Solder Tail : 100" min. Mt. Tin 2.2.2 Plastic Parts <UL94V-0> 2.2.2.1 Housing : High Temperature Thermoplastic, Black 2.2.2.2 Case : High Temperature Thermoplastic, Black 2.2.2.3 Cover: High Temperature Thermoplastic, Black 2.2.3 Shield Parts 2.2.3.1 Shield : Stainless, Thickness=0.20mm Finish : Soldering Area : Gold Flash 2011/8/19 -4- www.ude-corp.com BS-R250210 Spec No. : BS-0210 2.3 Operating and Storage Temperature Operating : -40C to +85C p g Temperature p Storage Temperature : -40C to +85C 2.4 RJ45 specifications Insulation Resistance 500M min. Insertion force with the latch depressed 22N max Removal force with the latch depressed 44N max Locking Force of Plug Latch : 50N min. @ 60+/-5 sec Durability : 2500 cycles 2.5 Performance and Test Description Product is designed to meet electrical, mechanical and environmental performance requirements specified in below table. All tests are performed at ambient environmental conditions per MIL-STD-1344A and EIA-364 unless otherwise specified. 2.6 Packaging and Packing All parts shall be packaged and packed to protect against physical damagecorrosion and deterioration during shipment and storage. 2011/8/19 -5- www.ude-corp.com BS-R250210 Spec No. : BS-0210 3. ELECTRICAL CHARACTERISTICS 3.1 Schematic RJ45 OUTPUT C1 TX+ INPUT TD+ R1 TD R2 C2 TX 1:1 75 TCT R3 75 C5 RCT R4 RD+ R5 C4 1:1 C3 RX+ C6 RX RD R6 75 NC R7 75 C7 2KV, 1000pF GND R8 C8 Shield L2 L3 Yellow Green L4 Emitting Color p (nm) Green 565 Yellow 585 2011/8/19 L1 Vf @If=20mA 1.7 ~2.6 V 1.7 ~2.6 V -6- Ir @Vr=5V 10A max. 10A max. www.ude-corp.com BS-R250210 Spec No. : BS-0210 3.2 Transmitter filter & Receiver filter Type yp : Balance low pass p 100 impedance p Insertion loss : 1~100 MHz -1.0dB max. Return loss : 1~10 MHz -20dB min. load 100 30MHz -16dB min. load 100 60~80MHz -12dB min. load 100 3.3 Common Mode Rejection : 3.4 Cross Talk : 1~50 MHz -30dB min. 50~130 MHz -20dB min. 1~10 MHz -40dB min. 30~60 MHz -35dB min. 60~100 MHz -30dB min. 3.5 Inductance @ 100KHz, 0.1V, 8mA DC BIAS Input(R1-R2), Input(R5-R6) : 350H min. 3.6 Hi-Pot Test Input(R1-R2) To Output(C1-C2) : 1500Vac 60s or 2250Vdc 60s Input(R5-R6) To Output(C3-C6) : 1500Vac 60s or 2250Vdc 60s 2011/8/19 -7- www.ude-corp.com BS-R250210 Spec No. : BS-0210 4. IR REFLOW TEMPERATURE PROFILE 2011/8/19 -8- www.ude-corp.com