SPECIFICATION CONTROL DRAWING Product Revisions Component Dimensions Product Name SO63-1-9030 C Ident. Code SO631R SO63-2-9030 C SO632R SO63-3-9030 C SO633R SO63-4-9030 C SO634R SO63-5-9030 C SO635R L1.75 (L0.07) 16.5 (0.650) 16.5 (0.650) 16.5 (0.650) 19.1 (0.750) 19.1 (0.750) oB min 1.9 (0.075) 2.65 (0.105) 4.30 (0.170) 5.95 (0.235) 7.0 (0.275) oC min 2.65 (0.105) 3.68 (0.145) 5.08 (0.200) 6.45 (0.255) 7.6 (0.300) H min 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) 8.25 (0.325) Shall Accommodate Cable With Dimensions oE oF oD max min max 2.65 0.90 1.9 (0.105) (0.035) (0.075) 3.68 1.40 2.65 (0.145) (0.055) (0.105) 5.08 2.15 4.3 (0.200) (0.085) (0.170) 6.45 3.30 5.95 (0.255) (0.130) (0.235) 7.6 4.30 7.0 (0.300) (0.170) (0.275) MATERIALS 1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue. 2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR: SOLDER: TYPE Sn63 per ANSI J-STD-006. FLUX: TYPE ROL1 per ANSI J-STD-004. THERMAL INDICATOR: Fusible ring with melt temp of 221C. 3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue. 4. BRAID STRAP: Tin plated copper alloy PD-135 strands. CMA 1000. APPLICATION 1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material. For compatible insulations, see MIL-S-83519/2 or consult Raychem. 2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water. 3. Temperature range: -55C to +150C. 4. Parts shall be marked with identification code per table. For best results, prepare the cable as shown: SOLDERSLEEVE is a trademark of TE Connectivity. TE Connectivity 300 Constitution Drive, Menlo Park, CA. 94025, U.S.A. TITLE: Raychem UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS. INCHES DIMENSIONS ARE BETWEEN BRACKETS. TOLERANCES: ANGLES: N/A TE Connectivity reserves the right to amend this 0.00 N/A drawing at any time. Users should evaluate the 0.0 N/A ROUGHNESS IN suitability of the product for their application. 0 N/A MICRON DRAWN BY: CAGE CODE: REPLACES: DCR NUMBER: M. FORONDA 06090 D982095 D000100 SOLDERSLEEVE DEVICE SHIELD TERMINATION WITH BRAID DOCUMENT NO.: PROD. REV.: SO63-X-9030 DOC ISSUE: SEE TABLE SCALE: None Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision. (c) 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved 7 SIZE: DATE: 15-Apr-11 SHEET: A 1 of 1