SPECIFICATION CONTROL DRAWING
TE Connectivity
300 Constitution Drive,
Menlo Park, CA. 94025, U.S.A.
Raychem
TITLE:
SOLDERSLEEVE DEVICE
SHIELD TERMINATION WITH BRAID
UNLESS OTHERWISE SPECIFIED DIMENSIONS ARE IN MILLIMETERS.
INCHES DIMENSIONS ARE BETWEEN BRACKETS. DOCUMENT NO.: SO63-X-9030
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
TE Connectivity reserves the right to amend this
drawing at any time. Users should evaluate the
suitability of the product for their application.
PROD. REV.:
SEE TABLE
DOC ISSUE:
7
DATE:
15-Apr-11
DRAWN BY:
M. FORONDA
CAGE CODE:
06090
REPLACES:
D982095
DCR NUMBER:
D000100
SCALE:
None
SIZE:
A
SHEET:
1 of 1
Print Date: 9-May-11 If this document is printed it becomes uncontrolled. Check for the latest revision.
© 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved
Product Revisions Component Dimensions Shall Accommodate
Cable With Dimensions
Product
Name
Ident.
Code
L1.75
(L0.07)
øB
min
øC
min
H
min
øE
max
øF
min
øD
max
SO63-1-9030 C SO631R 16.5
(0.650)
1.9
(0.075)
2.65
(0.105)
8.25
(0.325)
2.65
(0.105)
0.90
(0.035)
1.9
(0.075)
SO63-2-9030 C SO632R 16.5
(0.650)
2.65
(0.105)
3.68
(0.145)
8.25
(0.325)
3.68
(0.145)
1.40
(0.055)
2.65
(0.105)
SO63-3-9030 C SO633R 16.5
(0.650)
4.30
(0.170)
5.08
(0.200)
8.25
(0.325)
5.08
(0.200)
2.15
(0.085)
4.3
(0.170)
SO63-4-9030 C SO634R 19.1
(0.750)
5.95
(0.235)
6.45
(0.255)
8.25
(0.325)
6.45
(0.255)
3.30
(0.130)
5.95
(0.235)
SO63-5-9030 C SO635R 19.1
(0.750)
7.0
(0.275)
7.6
(0.300)
8.25
(0.325)
7.6
(0.300)
4.30
(0.170)
7.0
(0.275)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, radiation cross-linked modified polyvinylidene fluoride. Transparent blue.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI J-STD-006.
FLUX: TYPE ROL1 per ANSI J-STD-004.
THERMAL INDICATOR: Fusible ring with melt temp of 221C.
3. MELTABLE RINGS: Environment resistant thermoplastic. Color: blue.
4. BRAID STRAP: Tin plated copper alloy PD-135 strands. CMA 1000.
APPLICATION
1. These parts are designed to provide an environment protected shield termination on cables, rated for 125C minimum, meeting
the dimensional criteria listed and having tin or silver plated shields and insulation compatible with the insert material.
For compatible insulations, see MIL-S-83519/2 or consult Raychem.
2. When installed per Raychem process standard RCPS-100-70, assemblies will meet those requirements of Raychem
Specification RT-1404 and MIL-S-83519/2 which do not require electrical testing while parts are immersed in water.
3. Temperature range: -55C to +150C.
4. Parts shall be marked with identification code per table.
For best results, prepare
the cable as shown:
SOLDERSLEEVE is a trademark of TE Connectivity.
