ADP 56WA/WB Series Single Output, 56 Watt, Universal AC-DC Power Supplies New Release!! 3100 Tower Boulevard The ADP 56WA and WB Series are light, compact, and efficient power supplies. These supplies are ideal for a wide range of limited space applications for notebook computers, printers and instrumentation. The ADP Series quietly delivers continuous power, while complying with international safety standards. The ADP Series are enclosed in a molded sealed plastic case. Features * Sanken's patented SMZ(Soft-switched Multi-resonant, Zero-current switching) topology 5th Floor University Tower * High Efficiency, 84% Nominal * Ultra Miniature Size, 114.5mm x 49.5mm x 27mm (158cc) * Universal Input 90 to 265Vac * Meets Worldwide Safety Standards * Tight Voltage Regulation * Over-Current Protected * Two types available: 2 pin Inlet and 2 pin Barrel Output (WA) Durham, NC 27707 3 pin Inlet and 2 pin Barrel Output (WB) * Meets FCC, VCCI Class 2 and CISPR Level "B" EMI Requirements Rated Output Voltage Rated Output Current OverCurrent Protection OverVoltage Protection Ripple Noise Efficiency ADP56WA16.0 16 V 3.5 A 0~3.5 A 15.5~17 V 250mVpp 84% ADP56WB16.0 16 V 3.5 A 0~3.5 A 15.5~17 V 250mVpp 84% Phone: (888)-888-4914 Fax: (919)402-8540 Email: allegro@intrex.net ADP 56WA/WB Series SPECIFICATIONS INPUT VIBRATION Input Voltage Universal, 90 to 265 V Frequency 5~100Hz Input Frequency 47 to 63Hz Amplitude 25mm MAX Input Current 1.4A or less Acceleration 0.5G Inrush Current 100A or less at cold start Sweep Time 1 min AC Turn-on Time 3 sec. or less at 90 V Direction X, Y, Z Vibration Time 10 min OUTPUT SHOCK Output Power 56W Storage Over-Current Protection Yes, Constant current from 1.5 meter high to an oak Over-Voltage Protection Yes, 22V or less board Leakage Current 250A max (240V,50Hz) Thermal Protection Yes, Shut down Sine wave: 10ms Reset Time after Shutdown 20 sec. or less at 264V Direction of force: X,Y,Z Output Rise-up Time 90 msec. or less Apply 10 Times in 1 sec. interval Operation EMI Regulations Passes lifting the unit and dropping it Shock acceleration: 2.0G VCCI Class-II FCC Class-B (115 V) ENVIRONMENTAL Operating Temperature 5~40C CISPR22 Class-B (230 V) Storage Temperature -31~+60C Cooling Free air convection UL No.1950 2nd Edition, UL1310 Storage Humidity 8~80% CSA C22.2 No. 950 Operation Humidity 8~80% IEC-No. 950 Safety Standards Dentori, Kou-Syu Hi-Pot Test P-S 3 kv 1sec. (10 mA or less) Insulation Resistance P-S DC 500 V. 50 MW or more