Click on Series name for product info on aimtec.com Series AM2DM-NZ 2 Watt | DC-DC Converter FEATURES: * * * * 7 pin SIP package High efficiency up to 84% Reinforced insulation Leakage current < 2A * * * * * Operating temperature -40C to + 85C Isolation voltage: 4200VAC or 6000VDC Ultra-low Isolation capacitance of 5pF IEC/EN/UL60601-1 1xMOPP/2xMOOP Models Single output Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (F) Isolation (VAC) Isolation (VDC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 5 12 15 5 12 15 5 12 15 400 167 133 400 167 133 400 167 133 1000 470 470 1000 470 470 1000 470 470 4200 4200 4200 4200 4200 4200 4200 4200 4200 6000 6000 6000 6000 6000 6000 6000 6000 6000 77 79 79 77 80 82 79 82 84 Input Voltage (V) Output Voltage (V) Output Current max (mA) Max. Capacitive Load (F) Isolation (VAC) Isolation (VDC) Efficiency (%) 4.5-5.5 4.5-5.5 4.5-5.5 4.5-5.5 10.8-13.2 10.8-13.2 10.8-13.2 10.8-13.2 21.6-26.4 21.6-26.4 21.6-26.4 21.6-26.4 5 9 12 15 5 9 12 15 5 9 12 15 200 111 83 67 200 111 83 67 200 111 83 67 470 470 220 220 470 470 220 220 470 470 220 220 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 4200 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 78 78 78 80 78 82 82 80 79 81 82 81 Model AM2DM-0505SH60-NZ AM2DM-0512SH60-NZ AM2DM-0515SH60-NZ AM2DM-1205SH60-NZ AM2DM-1212SH60-NZ AM2DM-1215SH60-NZ AM2DM-2405SH60-NZ AM2DM-2412SH60-NZ AM2DM-2415SH60-NZ Models Dual output Model AM2DM-0505DH60-NZ AM2DM-0509DH60-NZ AM2DM-0512DH60-NZ AM2DM-0515DH60-NZ AM2DM-1205DH60-NZ AM2DM-1209DH60-NZ AM2DM-1212DH60-NZ AM2DM-1215DH60-NZ AM2DM-2405DH60-NZ AM2DM-2409DH60-NZ AM2DM-2412DH60-NZ AM2DM-2415DH60-NZ Input Specifications Parameters Voltage range Absolute Max Input Voltage (1s) Nominal Typical 5 12 24 5V 12V 24V 4.5-5.5 10.8-13.2 21.6-26.4 Filter Input reflected ripple current Input Current (no load/full load) www.aimtec.com F 051e R7 Maximum Units VDC -0.7 - 9 -0.7 - 18 -0.7 - 30 VDC Capacitor 5 12 24 200 35/274 15/114 10/56 Tel: +1 514 620 2722 1 of 4 mA p-p mA Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM2DM-NZ 2 Watt | DC-DC Converter Isolation Specifications Parameters Conditions Tested I/O voltage Typical Rated Units 4200 6000 2 VAC VDC MOhm pF A Maximum Units 60sec Resistance Capacitance Leakage current > 1000 5 250VAC, 50/60Hz Output Specifications Parameters Conditions Voltage accuracy Short Circuit protection Line voltage regulation Typical See tolerance graph Momentary (3 sec.) For 1.0% of Vin 10~100% load, 5V 10~100% load, Others Full load At 20MHz Bandwidth Load voltage regulation Temperature coefficient Ripple & Noise 1.2 20 15 0.02 100 % of Vout % 150 %/oC mV p-p Maximum Units General Specifications Parameters Conditions Typical Switching frequency 100% load 100 KHz oC Max Case temperature 100 oC Operating temperature With no derating -40 to +85 oC Storage temperature -55 to +125 Cooling Free air convection Humidity 95 % Case material Black flame-retardant and heat-resistant plastic (UL94V-0) Weight 4.2 g Dimensions (L x W x H) 0.77 x 0.39 x 0.49 inch 19.50 x 9.80 x 12.5 mm MTBF >3,500,000 hrs (MIL-HDBK -217F, Ground Benign, t=+25oC) NOTE: All specifications in this datasheet are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified Safety Specifications Parameters Approvals UL60601-1 EN55022 Class B (see recommended circuit) IEC61000-4-2, Perf. Criteria B (ESD Contact +/- 8KV) Standards Pin Out Specifications Pin Single Dual 1 2 5 6 7 + V Input - V Input - V Output No pin + V Output + V Input - V Input - V Output Common + V Output www.aimtec.com F 051e R7 Tel: +1 514 620 2722 2 of 4 Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM2DM-NZ 2 Watt | DC-DC Converter Dimensions 6000 DVC 19.50 (0.77) 9.8 (0.39) PRINTED FACE 12.50 (0.49) 12.5 (0.49) 0.50 (0.02) 4.10 (0.16) 2.54 (0.10) 15.24 (0.60) 0.50 (0.02) Dimensions are in mm (inch) Pin Pitch Tolerance: 0.10 mm (0.004 inch) Case Tolerance: 0.25 mm (0.01 inch) 9.8 (0.39) 0.3(0.01) 3.20 (0.05) 0.50 (0.02) Typical Characteristics 5V output models Temperature Others Derating Graph Tolerance Envelope Graph Tolerance Envelope Graph + 15% Free Air Convection Typical Load Line 85C +10% 100 +5% 80 Safe Operating Area +2.5% +2.5% -2.5% -2.5% 40 -7.5% 20 0 -40 -20 0 20 40 60 80 100 Ambient Temperature C 10% www.aimtec.com F 051e R7 50% Output Current (%) 100% Output Voltage 60 Output Voltage Nominal Voltage Output Power (%) + 5% Typical Load Line 10% Tel: +1 514 620 2722 3 of 4 -7.5% 50% Output Current(%) 100% Toll free: + 1 888 9 AIMTEC (926 6832) North America only Series AM2DM-NZ 2 Watt | DC-DC Converter Typical application circuit Single External capacitor - Single output Vin+ Vo+ Cout Cin Vin (VDC) Cin (F) Vout (VDC) Cout (F) 5 12 24 10 4.7 2.2 5 12 15 10 2.2 1 VinVo- Dual Vin+ External capacitor - Dual output Vo+ Cout Com Cin Vin (VDC) Cin (F) Vout (VDC) Cout (F) 5 12 24 10 4.7 2.2 5 9 12/15 4.7 2.2 1 Cout Vin- Vo- EMI Recommended Circuit (Class B) LDM 6.8H C1 4.7F/ 50V C2 4.7F/ 50V +V output +V input DC/DC Converter -V input Cout Load -V output NOTE: Cout value is the same as referenced in the Application Circuit. For 24V input voltage models the recommended LDM value is 15H. NOTE: 1. Datasheets are updated as needed and as such, specifications are subject to change without notice. Once printed or downloaded, datasheets are no longer controlled by Aimtec; refer to www.aimtec.com for the most current product specifications. 2. Product labels shown, including safety agency certifications on labels, may vary based on the date manufactured. 3. Mechanical drawings and specifications are for reference only. 4. All specifications are measured at an ambient temperature of 25C, humidity<75%, nominal input voltage and at rated output load unless otherwise specified. 5. Aimtec may not have conducted destructive testing or chemical analysis on all internal components and chemicals at the time of publishing this document. CAS numbers and other limited information are considered proprietary and may not be available for release. 6. This product is not designed for use in critical life support systems, equipment used in hazardous environments, nuclear control systems or other such applications which necessitate specific safety and regulatory standards other the ones listed in this datasheet. 7. Warranty is in accordance with Aimtec's standard Terms of Sale available at www.aimtec.com. www.aimtec.com F 051e R7 Tel: +1 514 620 2722 4 of 4 Toll free: + 1 888 9 AIMTEC (926 6832) North America only