230624188874 - Vishay Presicion Group

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260

148 Revision: 02-Dec-09

HVR25, HVR37

Vishay BCcomponents

High Ohmic/High Voltage Metal Film Leaded Resistors

A homogenous film of metal alloy is deposited on a high

grade ceramic body. After a helical groove has been cut in

the resistive layer, tinned electrolytic copper wires are

welded to the end-caps. The resistors are coated with a blue,

non-flammable lacquer, which provides electrical,

mechanical, and climatic protection.

FEATURES

•Metal film technology

•High pulse loading (up to 10 kV) capability

•Small size (0207/0411)

•Compatible with lead (Pb)-free and lead containing

soldering processes

•Compliant to RoHS directive 2002/95/EC

APPLICATIONS

•Power supplies

•Electronic ballast

•White goods

•Television

TECHNICAL SPECIFICATIONS

DESCRIPTION HVR25 HVR37

Resistance Range 100 kΩto

10 MΩ

100 kΩto

10 MΩ

100 kΩto

10 MΩ

100 kΩto

10 MΩ

Resistance Tolerance ± 5 %

E24 series

± 1 %

E24/E96 series

± 5 %

E24 series

± 1 %

E24/E96 series

Temperature Coefficient ± 200 ppm/K

Climatic Category

(LCT/UCT/Days) 55/155/56

Rated Dissipation, P70 0.25 W 0.5 W

Maximum Permissible Voltage Umax.

DC 1600 V 3500 V

RMS 1150 V 2500 V

Basic Specification IEC 60115-1

Stability After:

Load (1000 h, P70)± (5 %R +0.1Ω) ± (1.5 % R +0.1Ω)± (5 %R +0.1Ω) ± (1.5 % R +0.1Ω)

Long Term Damp Heat Test (56 Days) ± (1.5 % R +0.1Ω) ± (1.5 % R +0.1Ω) ± (1.5 % R +0.1Ω) ± (1.5 % R +0.1Ω)

Soldering (10 s, 260 °C) ± (1 % R +0.1Ω)± (1 %R +0.1Ω)± (1 %R +0.1Ω)± (1 %R +0.1Ω)

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com

Revision: 02-Dec-09 149

HVR25, HVR37

High Ohmic/High Voltage

Metal Film Leaded Resistors Vishay BCcomponents

Notes

(1) The PART NUMBER is shown to facilitate the introduction of the unified part numbering system

(2) Please refer to table PACKAGING, see next page

DIMENSIONS

PART NUMBER AND PRODUCT DESCRIPTION (1)

PART NUMBER: HVR2500001503JA100

MODEL/SIZE VARIANT TCR/MATERIAL VALUE TOLERANCE PACKAGING (2) SPECIAL

HVR2500

HVR3700

0 = Neutral 0 = Standard 3 digit value

1 digit multiplier

MULTIPLIER

3 = *103

4 = *104

5 = *105

F = ± 1 %

J = ± 5 %

Up to 2 digits

00 = Standard

PRODUCT DESCRIPTION: HVR25 5 % A1 150K

HVR25 5 % A1 150K

MODEL TOLERANCE PACKAGING (2) RESISTANCE VALUE

HVR25

HVR37

± 1 %

± 5 %

150K = 150 kΩ

4M64 = 4.64 MΩ

PACKAGING

MODEL TAPING

AMMO PACK REEL

PIECES CODE PIECES CODE

HVR25

Axial, 52 mm

5000 A5 5000 R5

1000 A1

Radial 4000 N4

HVR37 Axial, 52 mm 1000 A1 5000 R5

Ø D

Ø d

DIMENSIONS - Resistor types, mass and relevant physical dimensions

TYPE L1 max.

(mm)

L2 max.

(mm)

Dmax.

(mm)

Ø d

(mm)

MASS

(mg)

HVR25 6.5 7.5 2.5 0.58 ± 0.05 52.5 ± 1.5 220

HVR37 10 12 4 0.78 ± 0.05 52.5 ± 1.5 500

25RVH00001503JA100

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260

150 Revision: 02-Dec-09

HVR25, HVR37

Vishay BCcomponents High Ohmic/High Voltage

Metal Film Leaded Resistors

PRODUCTS WITH RADIAL LEADS (HVR25)

Note

• Please refer document number 28721 “Packaging” for more detail

MARKING

The nominal resistance and tolerance are marked on the resistor using four or five colored bands in accordance with IEC 60062,

marking codes for resistors and capacitors. Standard values of nominal resistance are taken from the E24 and E24/E96 series

for resistors with a tolerance of ± 5 % or ± 1 % respectively. The values of the E24/E96 series are in accordance with IEC 60063.

Yellow and grey are used instead of gold and silver because metal particles in the lacquer could affect high-voltage properties.

DIMENSIONS - Radial Taping

SYMBOL PARAMETER VALUE TOLERANCE UNIT

P Pitch of components 12.7 ± 1.0 mm

P0Feed-hole pitch 12.7 ± 0.2 mm

P1Feed-hole centre to lead at topside at the tape 3.85 ± 0.5 mm

P2Feed-hole center to body center 6.35 ± 1.0 mm

F Lead-to-lead distance 4.8 + 0.7/- 0 mm

W Tape width 18.0 ± 0.5 mm

W0Minimum hold down tape width 5.5 - mm

H1Component height 29 Max. mm

H0Lead wire clinch height 16.5 ± 0.5 mm

H Height of component from tape center 19.5 ± 1 mm

D0Feed-hole diameter 4.0 ± 0.2 mm

L Maximum length of snipped lead 11.0 - mm

L1Minimum lead wire (tape portion) shortest lead 2.5 - mm

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com

Revision: 02-Dec-09 151

HVR25, HVR37

High Ohmic/High Voltage

Metal Film Leaded Resistors Vishay BCcomponents

FUNCTIONAL PERFORMANCE

PULSE LOADING CAPABILITY

Note

• Maximum allowed peak pulse voltage in accordance with IEC 60065, 14.1.a; 50 discharges from a 1 nF capacitor charged to Umax.;

12 discharges/min

Maximum dissipation (Pmax.) in percentage of rated power as a function of ambient temperature (Tamb)

HVR25

ΔR = ± (4.0 % R + 0.1 Ω)

HVR37

For 5 % tolerance ΔR = ± (4.0 % R + 0.1 Ω)

For 1 % tolerance ΔR = ± (2.0 % R + 0.1 Ω)

100

- 55 0 70 155

Ambient temperature amb

Power Dissipation

Derating - Standard Operation

10-2 10-1 100101102

(MΩ)

max.

(kV)

10-2 10-1 100101102

(MΩ)

max.

(kV)

www.vishay.com For technical questions, contact: filmresistorsleaded@vishay.com Document Number: 30260

152 Revision: 02-Dec-09

HVR25, HVR37

Vishay BCcomponents High Ohmic/High Voltage

Metal Film Leaded Resistors

TESTS AND REQUIREMENTS

Essentially all tests are carried out in accordance with IEC 60115-1, category 55/155/56 (rated temperature range

- 55 °C to + 155 °C; damp heat, long term, 56 days) and along the lines of IEC 60068-2-xx test method. The tests are carried out

under standard atmospheric conditions according to IEC 60068-1, 5.3 unless otherwise specified. In some instances deviations

from IEC recommendations were necessary for our method of specifying.

PERFORMANCE

IEC

60115-1

CLAUSE

IEC

60068-2-xx

TEST

METHOD

TEST PROCEDURE

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR)

HVR25 HVR37

4.8 - Temperature

coefficient

Between

- 55 °C and + 155 °C ± 200 ppm/K

4.25.1 - Endurance at 70 °C

1000 h;

loaded with P70 or Umax.;

1.5 h ON; 0.5 h OFF

for 5 % tolerance ± (5 % R + 0.1 Ω)

for 1 % tolerance ± (1.5 % R + 0.1 Ω)

4.24 78 (Cab) Damp heat,

steady state

56 days; 40 °C;

90 % to 95 % RH

loaded with 0.01 P70

for 5 % tolerance ± (5 % R + 0.1 Ω)

for 1 % tolerance ± (1.5 % R + 0.1 Ω)

4.23 Climatic sequence

± (1.5 % R + 0.1 Ω)

4.23.2 2 (Ba) Dry heat 16 h, 155 °C

4.23.3 30 (Db) Damp heat,

cyclic

24 h; 25 °C to 55 °C

90 % to 100 % RH; 1 cycle

4.23.4 1 (Aa) Cold 2 h, - 55 °C

4.23.6 30 (Db)

Damp heat,

(accelerated)

remaining cycles

5 days; 25 °C to 55 °C

90 to 100 % RH

4.19 14 (Na) Rapid change of

temperature

30 min at LCT;

30 min at UCT;

LCT = - 55 °C;

UCT = 155 °C;

5 cycles

No visual damage

± (1 % R + 0.1 Ω)

4.13 - Short time overload

Room temperature;

dissipation 6.25 x P70

(voltage not more than 2 x limiting

voltage,

10 000 Vmax.);

10 cycles 5 s ON and 45 s OFF

for 5 % tolerance ± (2 % R + 0.1 Ω)

for 1 % tolerance ± (1 % R + 0.1 Ω)

4.12 - Noise IEC 60195 Max. 5 µV/V Max. 2.5 µV/V

4.16 Robustness of

terminations:

No damage

± (1 % R + 0.1 Ω)

4.16.2 21 (Ua1) Tensile all samples Load 10 N; 10 s

4.16.3 21 (Ub) Bending half number

of samples Load 5 N; 4 x 90°

4.16.4 21 (Uc) Torsion other half of

samples 3 x 360° in opposite direction

Document Number: 30260 For technical questions, contact: filmresistorsleaded@vishay.com www.vishay.com

Revision: 02-Dec-09 153

HVR25, HVR37

High Ohmic/High Voltage

Metal Film Leaded Resistors Vishay BCcomponents

12NC INFORMATION FOR HISTORICAL CODING REFERENCE ONLY

•The resistors have a 12 digit ordering code starting with

2306

•The next 4 or 5 digits indicate the resistor type and

packaging

•For 5 % tolerance the last 3 digits indicate the resistance

value:

- The first 2 digits indicate the resistance value

- The last digit indicates the resistance decade in

accordance with table

•For 1 % tolerance the last 4 digits indicate the resistance

value:

- The first 3 digits indicate the resistance value

- The last digit indicates the resistance decade in

accordance with table

Last Digit of 12NC Indicating Resistance Decade

12NC Example

HVR25, 150 kΩ, ± 5 %, ammopack 1000 pieces is

2306 241 13154

4.22 6 (Fc) Vibration

Frequency 10 Hz to 500 Hz;

displacement

1.5 mm or acceleration 10 g;

3 directions;

total 6 h (3 x 2 h)

± (1.0 % R + 0.1 Ω)

4.17 20 (Ta) Solderability

(after ageing)

2 s; 235 °C: Solder bath method;

SnPb40

3 s; 245 °C: Solder bath method;

SnAg3Cu0.5

Good tinning

(≥ 95 % covered);

no visible damage

4.18 20 (Tb) Resistance to

soldering heat

Thermal shock: 10 s; 260 °C;

3 mm from body ± (1 % R + 0.1 Ω)

4.29 45 (XA) Component solvent

resistance Isopropyl alcohol No visible damage

4.6.11 - Insulation resistance

U = 500 VDC

during 1 min,

V-block method

Rins min. 104 MΩ

4.7 - Voltage proof on

insulation

URMS = 700 V

during 1 min,

V-block method

No flashover or breakdown

PERFORMANCE

IEC

60115-1

CLAUSE

IEC

60068-2-xx

TEST

METHOD

TEST PROCEDURE

REQUIREMENTS

PERMISSIBLE CHANGE (ΔR)

HVR25 HVR37

RESISTANCE

DECADE (5 %)

RESISTANCE

DECADE (1 %) LAST DIGIT

100 kΩ to 910 kΩ100 kΩ to 976 kΩ4

1 MΩ to 9.1 MΩ1 MΩ to 9.76 MΩ5

= 10 MΩ= 10 MΩ6

12NC - Resistor type and packaging

DESCRIPTION

2306 ... .....

BANDOLIER IN AMMOPACK BANDOLIER

ON REEL

TYPE TAPE WIDTH TOLERANCE RADIAL TAPED 1000 UNITS 5000 UNITS 5000 UNITS

4000 UNITS

HVR25 52.5 ± 5 % 241 36... 241 13... 241 53... 241 23....

± 1 % 241 0.... 241 8.... 241 7.... 241 6....

HVR37 52.5 ± 5 % - 242 13... - 242 23...

± 1 % - 242 8.... - 242 6....

Document Number: 91000 www.vishay.com

Revision: 18-Jul-08 1

Disclaimer

Legal Disclaimer Notice

Vishay

All product specifications and data are subject to change without notice.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf

(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein

or in any other disclosure relating to any product.

Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any

information provided herein to the maximum extent permitted by law. The product specifications do not expand or

otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed

therein, which apply to these products.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this

document or by any conduct of Vishay.

The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless

otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such

applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting

from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding

products designed for such applications.

Product names and markings noted herein may be trademarks of their respective owners.