S-1206 Series www.ablic.com www.ablicinc.com ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 (c) ABLIC Inc., 2006-2015 The S-1206 Series is a positive voltage regulator with ultra low current consumption, low dropout voltage, high-accuracy output voltage, and 250 mA output current developed based on CMOS technology. I/O capacitors are as small as 0.1 F. S-1206 Series operates at ultra low current consumption of 1.0 A (typ.). The built-in low-on-resistance transistor realizes low dropout voltage and a large output current. A built-in overcurrent protection circuit prevents the load current from exceeding the current capacity of the output transistor. Three packages, SOT-23-3, SOT-89-3, and SNT-6A(H) are available. Compared with voltage regulators using a conventional CMOS technology, more types of capacitors, including small I/O capacitors, can be used with the S-1206 Series. The S-1206 Series features ultra low current consumption and comes in a small package, making them most suitable for portable equipment. Features Output voltage: Input voltage: Output voltage accuracy: Dropout voltage: Current consumption: Output current: Input and output capacitors: Built-in overcurrent protection circuit: Operation temperature range: *2 Lead-free, Sn 100%, halogen-free 1.2 V to 5.2 V, selectable in 0.05 V step 1.7 V to 6.5 V 1.0% (1.2 V to 1.45 V output product: 15 mV) 150 mV typ. (3.0 V output product, IOUT = 100 mA) During operation: 1.0 A typ., 1.5 A max. Possible to output 250 mA (3.0 V output product, VIN VOUT(S) 1.0 V)*1 A ceramic capacitor of 0.1 F or more can be used. Limits overcurrent of output transistor. Ta = 40C to 85C *1. Attention should be paid to the power dissipation of the package when the output current is large. *2. Refer to " Product Name Structure" for details. Applications Constant-voltage power supply for battery-powered device Constant-voltage power supply for cellular phone Constant-voltage power supply for portable equipment Packages SOT-23-3 SOT-89-3 SNT-6A(H) 1 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Block Diagram *1 VIN VOUT Overcurrent protection circuit Reference voltage circuit VSS *1. Parasitic diode Figure 1 2 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Product Name Structure The output voltage value and package types for the S-1206 Series can be selected at the user's request. Refer to "1. Product Name" regarding the contents of product name, "2. Packages" regarding the package drawings and "3. Product Name List" regarding details of the product name. 1. Product Name 1. 1 SOT-23-3, SOT-89-3 S-1206 B xx - xxxx x Environmental code U: Lead-free (Sn 100%), halogen-free G: Lead-free (for details, please contact our sales office) Package name (abbreviation) and packing specifications *1 M3T1 : SOT-23-3, Tape U3T1 : SOT-89-3, Tape Output voltage value 12 to 52 (e.g. When output voltage is 1.2 V, it is expressed as 12.) *1. Refer to the tape drawing. 1. 2 SNT-6A(H) S-1206 B xx - I6T2 U Environmental code U: Lead-free (Sn 100%), halogen-free Package name (abbreviation) and packing specifications*1 I6T2 : SNT-6A(H), Tape Output voltage value 12 to 52 (e.g. When output voltage is 1.2 V, it is expressed as 12.) *1. Refer to the tape drawing. 2. Packages Package Name SOT-23-3 SOT-89-3 SNT-6A(H) Package MP003-C-P-SD UP003-A-P-SD PI006-A-P-SD Drawing Code Tape Reel MP003-C-C-SD MP003-Z-R-SD UP003-A-C-SD UP003-A-R-SD PI006-A-C-SD PI006-A-R-SD Land PI006-A-L-SD 3 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 3. Product Name List Table 1 Output Voltage 1.2 V 15 mV 1.3 V 15 mV 1.4 V 15 mV 1.5 V 1.0% 1.6 V 1.0% 1.7 V 1.0% 1.8 V 1.0% 1.85 V 1.0% 1.9 V 1.0% 2.0 V 1.0% 2.1 V 1.0% 2.2 V 1.0% 2.3 V 1.0% 2.4 V 1.0% 2.5 V 1.0% 2.6 V 1.0% 2.7 V 1.0% 2.8 V 1.0% 2.85 V 1.0% 2.9 V 1.0% 3.0 V 1.0% 3.1 V 1.0% 3.2 V 1.0% 3.3 V 1.0% 3.4 V 1.0% 3.5 V 1.0% 3.6 V 1.0% 3.7 V 1.0% 3.8 V 1.0% 3.9 V 1.0% 4.0 V 1.0% 4.1 V 1.0% 4.2 V 1.0% 4.3 V 1.0% 4.4 V 1.0% 4.5 V 1.0% 4.6 V 1.0% 4.7 V 1.0% 4.8 V 1.0% 4.9 V 1.0% 5.0 V 1.0% 5.1 V 1.0% 5.2 V 1.0% SOT-23-3 S-1206B12-M3T1x S-1206B13-M3T1x S-1206B14-M3T1x S-1206B15-M3T1x S-1206B16-M3T1x S-1206B17-M3T1x S-1206B18-M3T1x S-1206B1J-M3T1x S-1206B19-M3T1x S-1206B20-M3T1x S-1206B21-M3T1x S-1206B22-M3T1x S-1206B23-M3T1x S-1206B24-M3T1x S-1206B25-M3T1x S-1206B26-M3T1x S-1206B27-M3T1x S-1206B28-M3T1x S-1206B2J-M3T1x S-1206B29-M3T1x S-1206B30-M3T1x S-1206B31-M3T1x S-1206B32-M3T1x S-1206B33-M3T1x S-1206B34-M3T1x S-1206B35-M3T1x S-1206B36-M3T1x S-1206B37-M3T1x S-1206B38-M3T1x S-1206B39-M3T1x S-1206B40-M3T1x S-1206B41-M3T1x S-1206B42-M3T1x S-1206B43-M3T1x S-1206B44-M3T1x S-1206B45-M3T1x S-1206B46-M3T1x S-1206B47-M3T1x S-1206B48-M3T1x S-1206B49-M3T1x S-1206B50-M3T1x S-1206B51-M3T1x S-1206B52-M3T1x SOT-89-3 S-1206B12-U3T1x S-1206B13-U3T1x S-1206B14-U3T1x S-1206B15-U3T1x S-1206B16-U3T1x S-1206B17-U3T1x S-1206B18-U3T1x S-1206B1J-U3T1x S-1206B19-U3T1x S-1206B20-U3T1x S-1206B21-U3T1x S-1206B22-U3T1x S-1206B23-U3T1x S-1206B24-U3T1x S-1206B25-U3T1x S-1206B26-U3T1x S-1206B27-U3T1x S-1206B28-U3T1x S-1206B2J-U3T1x S-1206B29-U3T1x S-1206B30-U3T1x S-1206B31-U3T1x S-1206B32-U3T1x S-1206B33-U3T1x S-1206B34-U3T1x S-1206B35-U3T1x S-1206B36-U3T1x S-1206B37-U3T1x S-1206B38-U3T1x S-1206B39-U3T1x S-1206B40-U3T1x S-1206B41-U3T1x S-1206B42-U3T1x S-1206B43-U3T1x S-1206B44-U3T1x S-1206B45-U3T1x S-1206B46-U3T1x S-1206B47-U3T1x S-1206B48-U3T1x S-1206B49-U3T1x S-1206B50-U3T1x S-1206B51-U3T1x S-1206B52-U3T1x SNT-6A(H) S-1206B12-I6T2U S-1206B13-I6T2U S-1206B14-I6T2U S-1206B15-I6T2U S-1206B16-I6T2U S-1206B17-I6T2U S-1206B18-I6T2U S-1206B1J-I6T2U S-1206B19-I6T2U S-1206B20-I6T2U S-1206B21-I6T2U S-1206B22-I6T2U S-1206B23-I6T2U S-1206B24-I6T2U S-1206B25-I6T2U S-1206B26-I6T2U S-1206B27-I6T2U S-1206B28-I6T2U S-1206B2J-I6T2U S-1206B29-I6T2U S-1206B30-I6T2U S-1206B31-I6T2U S-1206B32-I6T2U S-1206B33-I6T2U S-1206B34-I6T2U S-1206B35-I6T2U S-1206B36-I6T2U S-1206B37-I6T2U S-1206B38-I6T2U S-1206B39-I6T2U S-1206B40-I6T2U S-1206B41-I6T2U S-1206B42-I6T2U S-1206B43-I6T2U S-1206B44-I6T2U S-1206B45-I6T2U S-1206B46-I6T2U S-1206B47-I6T2U S-1206B48-I6T2U S-1206B49-I6T2U S-1206B50-I6T2U S-1206B51-I6T2U S-1206B52-I6T2U Remark 1. Please contact our sales office for products with output voltage values other than the above. 2. x: G or U 3. Please select products of environmental code = U for Sn 100%, halogen-free products. 4 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Pin Configurations Table 2 SOT-23-3 Top view 1 2 Pin No. Symbol 1 2 3 VIN VSS VOUT Description Input voltage pin GND pin Output voltage pin 3 Figure 2 Table 3 SOT-89-3 Top view 1 2 Pin No. 1 2 3 Symbol VSS VIN VOUT Description GND pin Input voltage pin Output voltage pin 3 Figure 3 Table 4 SNT-6A(H) Top view Pin No. 1 6 2 5 3 4 Figure 4 Symbol Description 1 VOUT Output voltage pin 2 VIN Input voltage pin 3 VSS GND pin *1 NC 4 No connection 5 VIN Input voltage pin NC*1 6 No connection *1. The NC pin is electrically open. The NC pin can be connected to VIN or VSS. 5 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Absolute Maximum Ratings Table 5 Item Symbol VIN VOUT Input voltage Output voltage SOT-23-3 Power dissipation PD SOT-89-3 SNT-6A(H) Operation ambient temperature Topr Storage temperature Tstg *1. When mounted on board [Mounted board] (1) Board size : 114.3 mm 76.2 mm t1.6 mm (2) Board name : JEDEC STANDARD51-7 Caution (Ta = 25C unless otherwise specified) Absolute Maximum Rating Unit VSS 0.3 to VSS 7 V VSS 0.3 to VIN 0.3 V 430*1 mW *1 1000 mW 500*1 mW 40 to 85 C 40 to 125 C The absolute maximum ratings are rated values exceeding which the product could suffer physical damage. These values must therefore not be exceeded under any conditions. Power Dissipation (PD) [mW] 1200 SOT-89-3 1000 800 600 6 SOT-23-3 400 200 0 Figure 5 SNT-6A(H) 0 150 100 50 Ambient Temperature (Ta) [C] Power Dissipation of Package (When Mounted on Board) ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Electrical Characteristics Table 6 Item Symbol *1 Output voltage VOUT(E) Output current*2 IOUT Dropout voltage*3 Vdrop Line regulation VOUT1 VIN VOUT Conditions Min. VOUT(S) VIN = VOUT(S) 1.0 V, IOUT = 30 mA, 15 mV 1.2 V VOUT(S) < 1.5 V VOUT(S) VIN = VOUT(S) 1.0 V, IOUT = 30 mA, 0.99 1.5 V VOUT(S) 150*5 VIN VOUT(S) 1.0 V, 1.2 V VOUT(S) < 1.5 V 250*5 VIN VOUT(S) 1.0 V, 1.5 V VOUT(S) 0.5 1.2 V VOUT(S) < 1.3 V 1.3 V VOUT(S) < 1.4 V 1.4 V VOUT(S) < 1.5 V 1.5 V VOUT(S) < 1.7 V IOUT = 100 mA 1.7 V VOUT(S) < 1.9 V 1.9 V VOUT(S) < 2.1 V 2.1 V VOUT(S) < 3.0 V 3.0 V VOUT(S) 5.2 V VOUT(S) 0.5 V VIN 6.5 V IOUT = 1 A (Ta = 25C unless otherwise specified) Test Typ. Max. Unit Circuit VOUT(S) VOUT(S) V 1 15 mV VOUT(S) VOUT(S) V 1 1.01 mA 3 mA 3 0.54 0.81 V 1 0.50 0.73 V 1 0.43 0.66 V 1 0.35 0.53 V 1 0.33 0.50 V 1 0.26 0.43 V 1 0.23 0.36 V 1 0.15 0.23 V 1 0.05 0.2 %/V 1 0.05 20 0.2 40 %/V mV 1 1 VIN = VOUT(S) 1.0 V, IOUT = 30 mA, 40C Ta 85C 120 ppm/C 1 ISS1 VIN = VOUT(S) 1.0 V, no load 1.0 1.5 A 2 VIN VIN = VOUT(S) 1.0 V, 1.2 V VOUT < 2.3 V VOUT = 0 V 2.3 V VOUT 5.2 V 1.7 130 100 6.5 V mA mA 3 3 VOUT2 Load regulation Output voltage temperature coefficient*4 Current consumption during operation Input voltage Short-circuit current ISHORT VOUT Ta VOUT IOUT = 30 mA VIN = VOUT(S) 1.0 V, 1 A IOUT 100 mA *1. VOUT(S) : Set output voltage VOUT(E) : Actual output voltage Output voltage when fixing IOUT (= 30 mA) and inputting VOUT(S) 1.0 V *2. The output current at which the output voltage becomes 95% of VOUT(E) after gradually increasing the output current. *3. Vdrop = VIN1 (VOUT3 0.98) VOUT3 is the output voltage when VIN = VOUT(S) 1.0 V and IOUT = 100 mA. VIN1 is the input voltage at which the output voltage becomes 98% of VOUT3 after gradually decreasing the input voltage. *4. A change in the temperature of the output voltage [mV/C] is calculated using the following equation. VOUT V [mV/C]*1 = VOUT(S) [V]*2 Ta OUT [ppm/C]*3 1000 Ta VOUT *1. Change in temperature of output voltage *2. Set output voltage *3. Output voltage temperature coefficient *5. The output current can be at least this value. Due to restrictions on the package power dissipation, this value may not be satisfied. Attention should be paid to the power dissipation of the package when the output current is large. This specification is guaranteed by design. 7 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Test Circuits 1. VIN VOUT V VSS Figure 6 2. A VIN VOUT VSS Figure 7 3. VIN VOUT VSS Figure 8 8 A V A ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Standard Circuit Input CIN VOUT VIN *1 Output CL *2 VSS Single GND GND *1. A capacitor for stabilizing the input. *2. A ceramic capacitor of 0.1 F or more can be used. Figure 9 Caution The above connection diagram and constant will not guarantee successful operation. Perform thorough evaluation using the actual application to set the constant. Condition of Application Input capacitor (CIN): 0.1 F or more Output capacitor (CL): 0.1 F or more Caution Generally a series regulator may cause oscillation, depending on the selection of external parts. Confirm that no oscillation occurs in the application for which the above capacitors are used. Selection of Input and Output Capacitors (CIN, CL) The S-1206 Series requires an output capacitor between the VOUT pin and VSS pin for phase compensation. Operation is stabilized by a ceramic capacitor with an output capacitance of 0.1 F or more in the entire temperature range. When using an OS capacitor, a tantalum capacitor, or an aluminum electrolytic capacitor, the capacitance must be 0.1 F or more. The value of the output overshoot or undershoot transient response varies depending on the value of the output capacitor. The required capacitance of the input capacitor differs depending on the application. The recommended value for an application is CIN 0.1 F, CL 0.1 F; however, when selecting these capacitors, perform sufficient evaluation, including evaluation of temperature characteristics, on the actual device. 9 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Explanation of Terms 1. Low Dropout Voltage Regulator This voltage regulator has the low dropout voltage due to its built-in low on-resistance transistor. 2. Low Equivalent Series Resistance A capacitor whose equivalent series resistance (RESR) is low. The S-1206 Series enables use of a low equivalent series resistance capacitor, such as a ceramic capacitor, for the output-side capacitor (CL). 3. Output Voltage (VOUT) The accuracy of the output voltage is ensured at 1.0% or 15 mV*2 under the specified conditions of fixed input voltage*1, fixed output current, and fixed temperature. *1. Differs depending on the product. *2. When VOUT < 1.5 V : 15 mV, When 1.5 V VOUT : 1.0% Caution If the above conditions change, the output voltage value may vary and exceed the accuracy range of the output voltage. Refer to the " Electrical Characteristics" and " Characteristics (Typical Data)" for details. 4. Line Regulation VOUT1 VIN VOUT Indicates the dependency of the output voltage on the input voltage. That is, the values show how much the output voltage changes due to a change in the input voltage with the output current remaining unchanged. 5. Load Regulation (VOUT2) Indicates the dependency of the output voltage on the output current. That is, the values show how much the output voltage changes due to a change in the output current with the input voltage remaining unchanged. 6. Dropout Voltage (Vdrop) Indicates the difference between input voltage (VIN1) and the output voltage when; decreasing input voltage (VIN) gradually until the output voltage has dropped out to the value of 98% of output voltage (VOUT3), which is at VIN = VOUT(S) 1.0 V. Vdrop = VIN1 (VOUT3 0.98) 10 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 7. Output Voltage Temperature Coefficient VOUT Ta VOUT The shaded area in Figure 10 is the range where VOUT varies in the operation temperature range when the output voltage temperature coefficient is 120 ppm/C. Example of S-1206B30 typ. product VOUT [V] 0.36 mV/C VOUT(E) *1 0.36 mV/C 40 25 85 Ta [C] *1. VOUT(E) is the value of the output voltage measured at Ta = 25C. Figure 10 A change in the temperature of the output voltage [mV/C] is calculated using the following equation. V VOUT [mV/C]*1 = VOUT(S) [V]*2 Ta OUT [ppm/C]*3 1000 Ta VOUT *1. Change in temperature of output voltage *2. Set output voltage *3. Output voltage temperature coefficient 11 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Operation 1. Basic Operation Figure 11 shows the block diagram of the S-1206 Series. The error amplifier compares the reference voltage (Vref) with feedback voltage (Vfb), which is the output voltage resistance-divided by feedback resistors (Rs and Rf). It supplies the gate voltage necessary to maintain the constant output voltage which is not influenced by the input voltage and temperature change, to the output transistor. VIN *1 Current supply Error amplifier Vref VOUT Rf Vfb Reference voltage circuit Rs VSS *1. Parasitic diode Figure 11 2. Output Transistor In the S-1206 Series, a low on-resistance P-channel MOS FET is used as the output transistor. Be sure that VOUT does not exceed VIN 0.3 V to prevent the voltage regulator from being damaged due to reverse current flowing from the VOUT pin through a parasitic diode to the VIN pin, when the potential of VOUT became higher than VIN. 3. Overcurrent Protection Circuit The S-1206 Series includes an overcurrent protection circuit having the characteristics shown in "1. Output Voltage vs. Output Current (Ta = 25C)" in " Characteristics (Typical Data)", in order to protect the output transistor against an excessive output current and short circuiting between the VOUT and VSS pins. The current when the output pin is short-circuited (ISHORT) is internally set at approx. 130 mA (typ.) (1.2 V VOUT < 2.3 V) or approx. 100 mA (typ.) (2.3 V VOUT 5.2 V), and the normal value is restored for the output voltage, if releasing a short circuit once. Caution This overcurrent protection circuit does not work as for thermal protection. If this IC long keeps short circuiting inside, pay attention to the conditions of input voltage and load current so that, under the usage conditions including short circuit, the loss of the IC will not exceed power dissipation of the package. 12 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Precautions Wiring patterns for the VIN pin, the VOUT pin and GND should be designed so that the impedance is low. When mounting an output capacitor between the VOUT pin and the VSS pin (CL) and a capacitor for stabilizing the input between the VIN pin and the VSS pin (CIN), the distance from the capacitors to these pins should be as short as possible. Note that generally the output voltage may increase when a series regulator is used at low load current (10 A or less). Note that generally the output voltage may increase due to the leakage current from an output driver when a series regulator is used at high temperature. Generally a series regulator may cause oscillation, depending on the selection of external parts. The following conditions are recommended for the S-1206 Series. However, be sure to perform sufficient evaluation under the actual usage conditions for selection, including evaluation of temperature characteristics. Refer to "5. Equivalent Series Resistance vs. Output Current Characteristics Example (Ta = 25C)" in " Reference Data" for the equivalent series resistance (RESR) of the output capacitor. Input capacitor (CIN): Output capacitor (CL): 0.1 F or more 0.1 F or more Use an I/O capacitor with good temperature characteristics (conforming to the ceramic capacitor EIA X5R (JIS B) characteristics). The voltage regulator may oscillate when the impedance of the power supply is high and the input capacitance is small or an input capacitor is not connected. If the output capacitance is small, power supply's fluctuation and the characteristics of load fluctuation become worse. Sufficiently evaluate the output voltage's fluctuation with the actual device. Overshoot may occur in the output voltage momentarily if the voltage is rapidly raised at power-on or when the power supply fluctuates. Sufficiently evaluate the output voltage at power-on with the actual device. The application conditions for the input voltage, the output voltage, and the load current should not exceed the package power dissipation. Do not apply an electrostatic discharge to this IC that exceeds the performance ratings of the built-in electrostatic protection circuit. In determining the output current, attention should be paid to the output current value specified in Table 6 in " Electrical Characteristics" and footnote *5 of the table. ABLIC Inc. claims no responsibility for any disputes arising out of or in connection with any infringement by products including this IC of patents owned by a third party. 13 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Characteristics (Typical Data) 1. Output Voltage vs. Output Current (Ta = 25C) VOUT [V] VIN = 2.2 V 3.2 V 6.5 V 0 1.5 V 1.7 V 0 S-1206B30 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 200 300 400 500 600 700 IOUT [mA] 100 3.3 V 4.0 V VOUT [V] S-1206B12 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 100 VIN = 3.5 V 5.0 V 6.5 V 200 300 400 500 600 700 IOUT [mA] S-1206B50 6 VIN = 5.5 V VOUT [V] 5 6.0 V 4 5.3 V 3 6.5 V 2 1 0 0 Remark In determining the output current, attention should be paid to the following. 1. Minimum output current value specified in Table 6 and footnote *5 in " Electrical Characteristics" 2. Power dissipation of package 200 300 400 500 600 700 IOUT [mA] 100 2. Output Voltage vs. Input Voltage (Ta = 25C) VOUT [V] 1.20 S-1206B30 3.1 IOUT = 1 A 3.0 1.15 10 A 1 mA 30 mA 50 mA 100 mA 1.10 1.05 1.00 1.0 S-1206B50 5.1 VOUT [V] 5.0 1.5 2.0 2.5 VIN [V] 4.9 3.0 3.5 10 A 1 mA 30 mA 50 mA 100 mA 4.8 4.7 4.5 4.5 5.0 5.5 VIN [V] IOUT = 1 A 2.9 10 A 1 mA 30 mA 50 mA 100 mA 2.8 2.7 2.6 IOUT = 1 A 4.6 14 VOUT [V] S-1206B12 1.25 6.0 6.5 2.5 2.5 3.0 3.5 4.0 VIN [V] 4.5 5.0 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 3. Dropout Voltage vs. Output Current S-1206B30 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 0 S-1206B50 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 50 Ta = 85C 25C 40C Vdrop [V] Ta = 85C 25C 40C Vdrop [V] S-1206B12 0.80 0.70 0.60 0.50 0.40 0.30 0.20 0.10 0 100 IOUT [mA] 150 200 0 50 100 150 200 IOUT [mA] 250 300 Vdrop [V] Ta = 85C 25C 40C 0 50 100 150 200 IOUT [mA] 250 300 Vdrop [V] 4. Dropout Voltage vs. Set Output Voltage 0.80 0.70 150 mA 0.60 100 mA 0.50 0.40 50 mA 0.30 30 mA 0.20 0.10 10 mA 0 0 1 IOUT = 250 mA 2 3 4 VOUT(S) [V] 5 6 15 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 5. Output Voltage vs. Ambient Temperature 0 25 Ta [C] 50 75 85 S-1206B50 5.10 5.08 5.06 5.04 5.02 5.00 4.98 4.96 4.94 4.92 4.90 40 25 0 25 Ta [C] 50 75 85 S-1206B30 3.10 3.08 3.06 3.04 3.02 3.00 2.98 2.96 2.94 2.92 2.90 40 25 0 75 85 50 25 Ta [C] VOUT [V] VOUT [V] VOUT [V] S-1206B12 1.30 1.28 1.26 1.24 1.22 1.20 1.18 1.16 1.14 1.12 1.10 40 25 6. Current Consumption vs. Input Voltage S-1206B12 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 25C 40C S-1206B50 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 2 3 4 VIN [V] 5 6 7 5 6 7 ISS1 [A] Ta = 85C 25C 40C 0 1 2 4 3 VIN [V] Ta = 85C ISS1 [A] ISS1 [A] Ta = 85C 0 16 S-1206B30 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 25C 40C 0 1 2 3 4 VIN [V] 5 6 7 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 7. Current Consumption vs. Ambient Temperature S-1206B12 1.4 1.2 1.0 0.8 0.6 0.4 0.2 6.5 V 0 25 Ta [C] VIN = 4.0 V 6.5 V ISS1 [A] VIN = 2.2 V ISS1 [A] 0 40 25 S-1206B30 1.4 1.2 1.0 0.8 0.6 0.4 0.2 50 75 85 0 40 25 0 25 Ta [C] 50 75 85 ISS1 [A] S-1206B50 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 40 25 VIN = 6.0 V 6.5 V 0 25 Ta [C] 50 75 85 17 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Reference Data 1. Input Transient Response Characteristics (Ta = 25C) 18 VIN [V] VOUT [V] VIN [V] IOUT = 100 mA, tr = tf = 5.0 s 5.6 5.5 VIN 5.4 5.3 CIN = CL = 0.1 F 5.2 CIN = CL = 1.0 F 5.1 VOUT 7.0 6.5 6.0 5.5 5.0 4.5 4.0 5.0 3.5 4.9 3.0 4.8 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VIN [V] VOUT [V] S-1206B50 IOUT = 1 mA, tr = tf = 5.0 s 7.0 5.6 6.5 5.5 VIN 6.0 5.4 5.5 5.3 CIN = CL = 0.1 F 5.2 5.0 CIN = CL = 1.0 F 5.1 VOUT 4.5 4.0 5.0 3.5 4.9 3.0 4.8 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VIN [V] t [ms] IOUT = 100 mA, tr = tf = 5.0 s 6.0 4.2 5.0 4.0 VIN 4.0 3.8 3.0 3.6 CIN = CL = 0.1 F 3.4 2.0 CIN = CL = 1.0 F 3.2 VOUT 1.0 3.0 0 1.0 2.8 2.0 2.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VOUT [V] VIN [V] VOUT [V] S-1206B30 IOUT = 1 mA, tr = tf = 5.0 s 6.0 4.2 5.0 4.0 VIN 4.0 3.8 3.0 3.6 CIN = CL = 0.1 F 3.4 2.0 CIN = CL = 1.0 F 3.2 VOUT 1.0 3.0 0 1.0 2.8 2.0 2.6 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 IOUT = 100 mA, tr = tf = 5.0 s 1.8 3.5 3.0 1.7 2.5 1.6 VIN 2.0 1.5 CIN = CL = 0.1 F 1.5 1.4 CIN = CL = 1.0 F 1.0 1.3 VOUT 0.5 1.2 1.1 0 0.5 1.0 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VOUT [V] VIN [V] VOUT [V] S-1206B12 IOUT = 1 mA, tr = tf = 5.0 s 1.8 3.5 3.0 1.7 2.5 1.6 VIN 2.0 1.5 1.5 CIN = CL = 0.1 F 1.4 1.0 1.3 VOUT CIN = CL = 1.0 F 0.5 1.2 1.1 0 0.5 1.0 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 2. Load Transient Response Characteristics (Ta = 25C) S-1206B12 VIN = 2.2 V, IOUT = 1 mA 40 mA 2.8 0.8 2.0 CIN = CL = 1.0 F VOUT 2.6 40 4.2 1 3.8 CIN = CL = 1.0 F 4.6 VOUT CIN = CL = 1.0 F CIN = CL = 0.1 F 4.2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 40 6.2 1 5.8 VOUT [V] 5.0 VOUT CIN = CL = 1.0 F VIN = 6.0 V, IOUT = 50 mA 100 mA 6.6 IOUT [mA] VOUT [V] 5.4 IOUT 3.0 50 CIN = CL = 0.1 F 2.2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] S-1206B50 VIN = 6.0 V, IOUT = 1 mA 40 mA 6.6 5.8 3.4 100 IOUT 2.6 CIN = CL = 0.1 F 2.2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 6.2 CIN = CL = 0.1 F VIN = 4.0 V, IOUT = 50 mA 100 mA 4.6 VOUT [V] 3.0 CIN = CL = 1.0 F t [ms] IOUT [mA] VOUT [V] 3.4 IOUT VOUT 50 0.4 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 S-1206B30 VIN = 4.0 V, IOUT = 1 mA 40 mA 4.6 3.8 1.2 0.8 CIN = CL = 0.1 F 0.4 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 4.2 1.6 100 IOUT IOUT [mA] VOUT 2.4 1 IOUT [mA] 1.2 40 5.4 5.0 100 IOUT VOUT 50 CIN = CL = 1.0 F IOUT [mA] 1.6 IOUT VOUT [V] 2.0 IOUT [mA] VOUT [V] 2.4 VIN = 2.2 V, IOUT = 50 mA 100 mA 2.8 4.6 CIN = CL = 0.1 F 4.2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 19 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 3. Input Voltage Transient Response Characteristics (Ta = 25C) 0 1.5 VOUT CIN = CL = 1.0 F 4 6 2 0.5 VOUT CIN = CL = 0.1 F CIN = CL = 1.0 F 4 6 8 0.5 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VIN = 4.0 V, IOUT = 100 mA 10 6 6 8 4 8 4 6 2 6 2 4 2 0 VIN VOUT CIN = CL = 1.0 F 0 2 CIN = CL = 0.1 F 4 VIN [V] VOUT [V] S-1206B30 VIN = 4.0 V, IOUT = 1 mA 10 0 1.0 0 8 0.5 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 2 VIN 4 2 0 VIN VOUT CIN = CL = 1.0 F CIN = CL = 0.1 F 0 2 4 VIN = 6.0 V, IOUT = 100 mA 14 8 12 6 10 4 8 VIN 2 6 0 2 4 4 2 VOUT CIN = CL = 1.0 F 6 0 CIN = CL = 0.1 F 8 2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VOUT [V] S-1206B50 VIN = 6.0 V, IOUT = 1 mA 14 8 12 6 10 4 8 VIN 2 6 0 2 4 CIN = CL = 1.0 F 4 2 VOUT 6 CIN = CL = 0.1 F 0 8 2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VIN [V] 6 2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] VOUT [V] 6 2 0.4 0.2 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 t [ms] 20 VIN [V] 2.0 2 1.0 0.5 2 0 VIN [V] CIN = CL = 0.1 F 4 VIN [V] VIN VOUT [V] 1.5 VOUT [V] VOUT [V] 2.0 VIN = 2.2 V, IOUT = 100 mA 2.5 4 VIN [V] S-1206B12 VIN = 2.2 V, IOUT = 1 mA 2.5 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 4. Ripple Rejection (Ta = 25C) S-1206B12 S-1206B30 100 80 IOUT = 30 mA 60 40 20 0 10 100 1k 10k Frequency [Hz] VIN = 4.0 V, CL = 0.1 F Ripple Rejection [dB] Ripple Rejection [dB] VIN = 2.2 V, CL = 0.1 F 100k 1M 100 80 IOUT = 30 mA 60 40 20 0 10 100 1k 10k Frequency [Hz] 100k 1M S-1206B50 Ripple Rejection [dB] VIN = 6.0 V, CL = 0.1 F 100 80 IOUT = 30 mA 60 40 20 0 10 100 1k 10k Frequency [Hz] 100k 1M 5. Equivalent Series Resistance vs. Output Current Characteristics Example (Ta = 25C) CL : Murata Manufacturing Co., Ltd. GRM115R71C104K (0.1 F) CIN = CL = 0.1 F 100 RESR [] VIN CIN Stable S-1206 Series CL 0 0.001 250 VSS RESR IOUT [mA] 21 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series Marking Specifications 1. SOT-23-3 Top view (1) to (3) : (4) : 1 Product abbreviation (refer to Product Name vs. Product Code) Lot number (1) (2) (3) (4) 2 3 Product Name vs. Product Code Product Name S-1206B12-M3T1x S-1206B13-M3T1x S-1206B14-M3T1x S-1206B15-M3T1x S-1206B16-M3T1x S-1206B17-M3T1x S-1206B18-M3T1x S-1206B1J-M3T1x S-1206B19-M3T1x S-1206B20-M3T1x S-1206B21-M3T1x S-1206B22-M3T1x S-1206B23-M3T1x S-1206B24-M3T1x S-1206B25-M3T1x S-1206B26-M3T1x S-1206B27-M3T1x S-1206B28-M3T1x S-1206B2J-M3T1x S-1206B29-M3T1x S-1206B30-M3T1x S-1206B31-M3T1x Product Code (1) (2) (3) S A A S A B S A C S A D S A E S A F S A G S A H S A I S A J S A K S A L S A M S A N S A O S A P S A Q S A R S A S S A T S A U S A V Product Name S-1206B32-M3T1x S-1206B33-M3T1x S-1206B34-M3T1x S-1206B35-M3T1x S-1206B36-M3T1x S-1206B37-M3T1x S-1206B38-M3T1x S-1206B39-M3T1x S-1206B40-M3T1x S-1206B41-M3T1x S-1206B42-M3T1x S-1206B43-M3T1x S-1206B44-M3T1x S-1206B45-M3T1x S-1206B46-M3T1x S-1206B47-M3T1x S-1206B48-M3T1x S-1206B49-M3T1x S-1206B50-M3T1x S-1206B51-M3T1x S-1206B52-M3T1x Product Code (1) (2) (3) S A W S A X S A Y S A Z S B A S B B S B C S B D S B E S B F S B G S B H S B I S B J S B K S B L S B M S B N S B O S B P S B Q Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 22 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 2. SOT-89-3 1 (1) to (3) : (4) to (6) : (4) (5) (6) (1) (2) (3) Top view 2 Product abbreviation (refer to Product Name vs. Product Code) Lot number 3 Product Name vs. Product Code Product Name S-1206B12-U3T1x S-1206B13-U3T1x S-1206B14-U3T1x S-1206B15-U3T1x S-1206B16-U3T1x S-1206B17-U3T1x S-1206B18-U3T1x S-1206B1J-U3T1x S-1206B19-U3T1x S-1206B20-U3T1x S-1206B21-U3T1x S-1206B22-U3T1x S-1206B23-U3T1x S-1206B24-U3T1x S-1206B25-U3T1x S-1206B26-U3T1x S-1206B27-U3T1x S-1206B28-U3T1x S-1206B2J-U3T1x S-1206B29-U3T1x S-1206B30-U3T1x S-1206B31-U3T1x Product Code (1) (2) (3) S A A S A B S A C S A D S A E S A F S A G S A H S A I S A J S A K S A L S A M S A N S A O S A P S A Q S A R S A S S A T S A U S A V Product Name S-1206B32-U3T1x S-1206B33-U3T1x S-1206B34-U3T1x S-1206B35-U3T1x S-1206B36-U3T1x S-1206B37-U3T1x S-1206B38-U3T1x S-1206B39-U3T1x S-1206B40-U3T1x S-1206B41-U3T1x S-1206B42-U3T1x S-1206B43-U3T1x S-1206B44-U3T1x S-1206B45-U3T1x S-1206B46-U3T1x S-1206B47-U3T1x S-1206B48-U3T1x S-1206B49-U3T1x S-1206B50-U3T1x S-1206B51-U3T1x S-1206B52-U3T1x Product Code (1) (2) (3) S A W S A X S A Y S A Z S B A S B B S B C S B D S B E S B F S B G S B H S B I S B J S B K S B L S B M S B N S B O S B P S B Q Remark 1. x: G or U 2. Please select products of environmental code = U for Sn 100%, halogen-free products. 23 ULTRA LOW CURRENT CONSUMPTION AND LOW DROPOUT CMOS VOLTAGE REGULATOR Rev.3.2_02 S-1206 Series 3. SNT-6A(H) Top view 6 5 4 (1) to (3) : (4) to (6) : Product abbreviation (refer to Product Name vs. Product Code) Lot number (1) (2) (3) (4) (5) (6) 1 2 3 Product Name vs. Product Code S-1206B12-I6T2U S-1206B13-I6T2U S-1206B14-I6T2U S-1206B15-I6T2U S-1206B16-I6T2U S-1206B17-I6T2U S-1206B18-I6T2U S-1206B1J-I6T2U S-1206B19-I6T2U S-1206B20-I6T2U S-1206B21-I6T2U S-1206B22-I6T2U S-1206B23-I6T2U S-1206B24-I6T2U S-1206B25-I6T2U S-1206B26-I6T2U S-1206B27-I6T2U S-1206B28-I6T2U S-1206B2J-I6T2U S-1206B29-I6T2U S-1206B30-I6T2U Product Code (1) (2) (3) S A A S A B S A C S A D S A E S A F S A G S A H S A I S A J S A K S A L S A M S A N S A O S A P S A Q S A R S A S S A T S A U S-1206B31-I6T2U S Product Name 24 A V Product Name S-1206B32-I6T2U S-1206B33-I6T2U S-1206B34-I6T2U S-1206B35-I6T2U S-1206B36-I6T2U S-1206B37-I6T2U S-1206B38-I6T2U S-1206B39-I6T2U S-1206B40-I6T2U S-1206B41-I6T2U S-1206B42-I6T2U S-1206B43-I6T2U S-1206B44-I6T2U S-1206B45-I6T2U S-1206B46-I6T2U S-1206B47-I6T2U S-1206B48-I6T2U S-1206B49-I6T2U S-1206B50-I6T2U S-1206B51-I6T2U S-1206B52-I6T2U Product Code (1) (2) (3) S A W S A X S A Y S A Z S B A S B B S B C S B D S B E S B F S B G S B H S B I S B J S B K S B L S B M S B N S B O S B P S B Q 2.90.2 1 2 3 +0.1 0.16 -0.06 0.950.1 1.90.2 0.40.1 No. MP003-C-P-SD-1.1 TITLE SOT233-C-PKG Dimensions No. MP003-C-P-SD-1.1 ANGLE UNIT mm ABLIC Inc. +0.1 o1.5 -0 4.00.1 2.00.1 +0.25 o1.0 -0 0.230.1 4.00.1 1.40.2 3.20.2 1 2 3 Feed direction No. MP003-C-C-SD-2.0 TITLE SOT233-C-Carrier Tape No. MP003-C-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.20.5 Enlarged drawing in the central part o130.2 No. MP003-Z-R-SD-1.0 SOT233-C-Reel TITLE MP003-Z-R-SD-1.0 No. QTY. ANGLE UNIT mm ABLIC Inc. 3,000 4.50.1 1.50.1 1.60.2 45 1 2 3 1.50.1 1.50.1 0.40.05 0.40.1 0.40.1 0.450.1 No. UP003-A-P-SD-2.0 TITLE SOT893-A-PKG Dimensions No. UP003-A-P-SD-2.0 ANGLE UNIT mm ABLIC Inc. 4.00.1(10 pitches : 40.00.2) +0.1 o1.5 -0 2.00.05 o1.5 +0.1 -0 0.30.05 8.00.1 2.00.1 4.750.1 Feed direction No. UP003-A-C-SD-2.0 TITLE SOT893-A-Carrier Tape No. UP003-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 16.5max. 13.00.3 Enlarged drawing in the central part (60) (60) No. UP003-A-R-SD-1.1 TITLE SOT893-A-Reel No. UP003-A-R-SD-1.1 ANGLE UNIT QTY. mm ABLIC Inc. 1,000 1.570.03 6 5 1 2 4 +0.05 0.08 -0.02 3 0.5 0.480.02 0.20.05 No. PI006-A-P-SD-2.1 TITLE SNT-6A(H)-A-PKG Dimensions No. PI006-A-P-SD-2.1 ANGLE UNIT mm ABLIC Inc. +0.1 o1.5 -0 4.00.1 2.00.05 0.250.05 +0.1 1.850.05 o0.5 -0 4.00.1 0.650.05 3 2 1 4 5 6 Feed direction No. PI006-A-C-SD-2.0 TITLE SNT-6A(H)-A-Carrier Tape No. PI006-A-C-SD-2.0 ANGLE UNIT mm ABLIC Inc. 12.5max. 9.00.3 Enlarged drawing in the central part o130.2 (60) (60) No. PI006-A-R-SD-1.0 TITLE SNT-6A(H)-A-Reel No. PI006-A-R-SD-1.0 ANGLE UNIT QTY. mm ABLIC Inc. 5,000 0.52 1.36 2 0.52 0.2 0.3 1. 2. 1 (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) 1. 2. 3. 4. 0.03 mm SNT 1. Pay attention to the land pattern width (0.25 mm min. / 0.30 mm typ.). 2. Do not widen the land pattern to the center of the package (1.30 mm to 1.40 mm). Caution 1. Do not do silkscreen printing and solder printing under the mold resin of the package. 2. The thickness of the solder resist on the wire pattern under the package should be 0.03 mm or less from the land pattern surface. 3. Match the mask aperture size and aperture position with the land pattern. 4. Refer to "SNT Package User's Guide" for details. 1. 2. (0.25 mm min. / 0.30 mm typ.) (1.30 mm ~ 1.40 mm) No. PI006-A-L-SD-4.1 TITLE SNT-6A(H)-A -Land Recommendation No. PI006-A-L-SD-4.1 ANGLE UNIT mm ABLIC Inc. Disclaimers (Handling Precautions) 1. All the information described herein (product data, specifications, figures, tables, programs, algorithms and application circuit examples, etc.) is current as of publishing date of this document and is subject to change without notice. 2. The circuit examples and the usages described herein are for reference only, and do not guarantee the success of any specific mass-production design. ABLIC Inc. is not responsible for damages caused by the reasons other than the products described herein (hereinafter "the products") or infringement of third-party intellectual property right and any other right due to the use of the information described herein. 3. ABLIC Inc. is not responsible for damages caused by the incorrect information described herein. 4. Be careful to use the products within their specified ranges. Pay special attention to the absolute maximum ratings, operation voltage range and electrical characteristics, etc. ABLIC Inc. is not responsible for damages caused by failures and / or accidents, etc. that occur due to the use of the products outside their specified ranges. 5. When using the products, confirm their applications, and the laws and regulations of the region or country where they are used and verify suitability, safety and other factors for the intended use. 6. When exporting the products, comply with the Foreign Exchange and Foreign Trade Act and all other export-related laws, and follow the required procedures. 7. The products must not be used or provided (exported) for the purposes of the development of weapons of mass destruction or military use. ABLIC Inc. is not responsible for any provision (export) to those whose purpose is to develop, manufacture, use or store nuclear, biological or chemical weapons, missiles, or other military use. 8. The products are not designed to be used as part of any device or equipment that may affect the human body, human life, or assets (such as medical equipment, disaster prevention systems, security systems, combustion control systems, infrastructure control systems, vehicle equipment, traffic systems, in-vehicle equipment, aviation equipment, aerospace equipment, and nuclear-related equipment), excluding when specified for in-vehicle use or other uses. Do not apply the products to the above listed devices and equipments without prior written permission by ABLIC Inc. Especially, the products cannot be used for life support devices, devices implanted in the human body and devices that directly affect human life, etc. Prior consultation with our sales office is required when considering the above uses. ABLIC Inc. is not responsible for damages caused by unauthorized or unspecified use of our products. 9. Semiconductor products may fail or malfunction with some probability. The user of the products should therefore take responsibility to give thorough consideration to safety design including redundancy, fire spread prevention measures, and malfunction prevention to prevent accidents causing injury or death, fires and social damage, etc. that may ensue from the products' failure or malfunction. The entire system must be sufficiently evaluated and applied on customer's own responsibility. 10. The products are not designed to be radiation-proof. The necessary radiation measures should be taken in the product design by the customer depending on the intended use. 11. The products do not affect human health under normal use. However, they contain chemical substances and heavy metals and should therefore not be put in the mouth. The fracture surfaces of wafers and chips may be sharp. Be careful when handling these with the bare hands to prevent injuries, etc. 12. When disposing of the products, comply with the laws and ordinances of the country or region where they are used. 13. The information described herein contains copyright information and know-how of ABLIC Inc. The information described herein does not convey any license under any intellectual property rights or any other rights belonging to ABLIC Inc. or a third party. Reproduction or copying of the information from this document or any part of this document described herein for the purpose of disclosing it to a third-party without the express permission of ABLIC Inc. is strictly prohibited. 14. For more details on the information described herein, contact our sales office. 2.2-2018.06 www.ablic.com Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: ABLIC: S-1206B12-I6T2G S-1206B13-I6T2G S-1206B14-I6T2G S-1206B15-I6T2G S-1206B16-I6T2G S-1206B17-I6T2G S-1206B18-I6T2G S-1206B19-I6T2G S-1206B1J-I6T2G S-1206B20-I6T2G S-1206B21-I6T2G S-1206B22-I6T2G S1206B23-I6T2G S-1206B24-I6T2G S-1206B25-I6T2G S-1206B26-I6T2G S-1206B27-I6T2G S-1206B28-I6T2G S1206B29-I6T2G S-1206B2J-I6T2G S-1206B30-I6T2G S-1206B31-I6T2G S-1206B32-I6T2G S-1206B33-I6T2G S1206B34-I6T2G S-1206B35-I6T2G S-1206B36-I6T2G S-1206B37-I6T2G S-1206B38-I6T2G S-1206B39-I6T2G S1206B40-I6T2G S-1206B41-I6T2G S-1206B42-I6T2G S-1206B43-I6T2G S-1206B44-I6T2G S-1206B45-I6T2G S1206B46-I6T2G S-1206B47-I6T2G S-1206B48-I6T2G S-1206B49-I6T2G S-1206B50-I6T2G S-1206B51-I6T2G S1206B52-I6T2G S-812C34AY-B2-U S-812C35AY-B2-U S-812C36AY-B2-U S-817B11AY-B2-U S-817B12AY-B2-U S-817B13AY-B2-U S-817B14AY-B2-U S-817B15AY-B2-U S-817B16AY-B2-U S-812C21AY-B2-U S-812C22AY-B2-U S-812C23AY-B2-U S-812C24AY-B2-U S-812C25AY-B2-U S-812C26AY-B2-U S-812C27AY-B2-U S-812C29AY-B2U S-812C32AY-B2-U S-812C33AY-B2-U S-812C37AY-B2-U S-812C38AY-B2-U S-812C39AY-B2-U S-812C40AYB2-U S-812C41AY-B2-U S-812C42AY-B2-U S-812C43AY-B2-U S-812C44AY-B2-U S-812C45AY-B2-U S812C46AY-B2-U S-812C47AY-B2-U S-812C48AY-B2-U S-812C49AY-B2-U S-812C51AY-B2-U S-812C52AY-B2-U S-812C53AY-B2-U S-812C54AY-B2-U S-812C55AY-B2-U S-812C56AY-B2-U S-812C57AY-B2-U S-812C58AY-B2U S-812C59AY-B2-U S-812C60AY-B2-U S-817B17AY-B2-U S-817B18AY-B2-U S-817B19AY-B2-U S-817B20AYB2-U S-817B21AY-B2-U S-817B22AY-B2-U S-817B23AY-B2-U S-817B24AY-B2-U S-817B25AY-B2-U S817B27AY-B2-U S-817B28AY-B2-U S-817B29AY-B2-U S-817B30AY-B2-U S-817B31AY-B2-U S-817B32AY-B2-U