IMS-5
Vishay Dale
Inductors, Commercial, Molded Shielded, Axial Leaded
www.vishay.com For technical questions, contact: magnetics@vishay.com Document Number: 34048
24 Revision: 14-Sep-09
FEATURES
•Wide inductance range in small package
•Flame retardant coating
•Electromagnetic shield-finest shield available
•Epoxy molded construction provides superior
moisture protection
•Precision performance, excellent reliability, sturdy
construction
•Compliant to RoHS directive 2002/95/EC
ELECTRICAL SPECIFICATIONS
Inductance Tolerance: ± 10 % standard, ± 5 % available
Insulation Resistance: 1000 MΩ minimum per
MIL-STD-202, method 302, test condition B
Dielectric Withstanding Voltage: 1000 VAC per
MIL-STD-202, method 301 (sea level)
Percent Coupling: 3 % maximum per MIL-PRF-15305
Operating Temperature: - 55 °C to + 105 °C
MECHANICAL SPECIFICATIONS
Terminals: 5 pounds pull per MIL-STD-202, method 211,
test condition A
Weight: IMS-5 = 0.85 g maximum
MATERIAL SPECIFICATIONS
Encapsulant: Epoxy
Standard Terminals: #22 AWG tinned copper
Notes
(1) Measured with full length lead
(2) Rated DC Current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient
(3) Incremental Current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value
INDUCTANCE RANGE AND MILITARY STANDARD
INDUCTANCE RANGE MATERIAL
FROM TO CORE SHIELD
0.10 µH 0.82 µH Phenolic Powd. Iron
1.0 µH 12 µH Powd. Iron Powd. Iron
15 µH 8200 µH Ferrite Ferrite
ENVIRONMENTAL PERFORMANCE
TEST CONDITIONS SPECIFICATIONS
Barometric
Pressure Test Condition C MIL-STD-202, Method 105
Thermal Shock Test Condition A-1 MIL-STD-202, Method 107
Flammability - MIL-STD-202, Method 111
Overload - MIL-PRF-15305
Low Temperature
Storage - MIL-PRF-15305
Resistance to
Soldering Heat Test Condition A MIL-STD-202, Method 210
Resistance to
Solvents - MIL-STD-202, Method 215
DIMENSIONS in inches [millimeters]
1.44 ± 0.188
[36.57 ± 4.78]
0.025 ± 0.002
[0.635 ± 0.051] 0.410 ± 0.020
[10.41 ± 0.508]
0.162 ± 0.010
[4.11 ± 0.254]
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(µH) TOL. Q
MIN.
TEST FREQ.
L AND Q (MHz)
SELF-RESONANT
FREQ MIN. (MHz) (1) DCR AT 25 °C
MAX. (Ω)
RATED DC
CURRENT (mA) (2) INCREMENTAL
CURRENT (mA) (3)
0.10 ± 10 % 50 25.0 250.0 0.025 1790 -
0.12 ± 10 % 51 25.0 250.0 0.034 1530 -
0.15 ± 10 % 51 25.0 250.0 0.037 1470 -
0.18 ± 10 % 50 25.0 250.0 0.047 1300 -
0.22 ± 10 % 49 25.0 250.0 0.067 1100 -
0.27 ± 10 % 47 25.0 250.0 0.11 855 -
0.33 ± 10 % 46 25.0 250.0 0.13 780 -
0.39 ± 10 % 44 25.0 250.0 0.18 670 -
0.47 ± 10 % 44 25.0 235.0 0.25 565 -
0.56 ± 10 % 43 25.0 210.0 0.33 490 -
0.68 ± 10 % 42 25.0 190.0 0.45 420 -
0.82 ± 10 % 40 25.0 180.0 0.59 370 -
1.0 ± 10 % 44 25.0 140.0 0.07 1070 -
1.2 ± 10 % 44 7.9 130.0 0.10 895 -
1.5 ± 10 % 44 7.9 115.0 0.12 815 -
1.8 ± 10 % 44 7.9 105.0 0.14 775 -
2.2 ± 10 % 44 7.9 100.0 0.19 650 -
2.7 ± 10 % 44 7.9 92.0 0.28 535 -
3.3 ± 10 % 44 7.9 85.0 0.35 480 -
Document Number: 34048 For technical questions, contact: magnetics@vishay.com www.vishay.com
Revision: 14-Sep-09 25
IMS-5
Inductors, Commercial, Molded Shielded, Axial
Leaded Vishay Dale
Notes
(1) Measured with full length lead
(2) Rated DC Current: Based on maximum temperature rise not to exceed 15 °C at + 90 °C ambient
(3) Incremental Current: The minimum typical current at which the inductance will be decreased by 5 % from its initial zero DC value
STANDARD ELECTRICAL SPECIFICATIONS
IND.
(µH) TOL. Q
MIN.
TEST FREQ.
L AND Q (MHz)
SELF-RESONANT
FREQ MIN. (MHz) (1) DCR AT 25 °C
MAX. (Ω)
RATED DC
CURRENT (mA) (2) INCREMENTAL
CURRENT (mA) (3)
3.9 ± 10 % 44 7.9 75.0 0.40 450 -
4.7 ± 10 % 44 7.9 70.0 0.55 380 -
5.6 ± 10 % 44 7.9 65.0 0.72 335 -
6.8 ± 10 % 50 7.9 55.0 1.02 280 -
8.2 ± 10 % 50 7.9 50.0 1.32 250 -
10 ± 10 % 50 7.9 46.0 1.62 220 -
12 ± 10 % 55 2.5 44.0 2.00 200 -
15 ± 10 % 45 2.5 49.0 0.80 315 250.0
18 ± 10 % 45 2.5 45.0 0.89 300 235.0
22 ± 10 % 45 2.5 41.0 0.96 290 220.0
27 ± 10 % 45 2.5 38.0 1.19 260 200.0
33 ± 10 % 45 2.5 34.0 1.37 240 190.0
39 ± 10 % 50 2.5 29.0 1.93 205 180.0
47 ± 10 % 50 2.5 27.0 2.11 195 175.0
56 ± 10 % 50 2.5 25.0 2.23 190 160.0
68 ± 10 % 50 2.5 21.0 2.70 170 150.0
82 ± 10 % 50 2.5 10.5 2.44 180 140.0
100 ± 10 % 50 2.5 10.0 3.12 160 120.0
120 ± 10 % 55 0.79 9.7 3.6 150 95.0
150 ± 10 % 55 0.79 8.5 4.1 140 90.0
180 ± 10 % 55 0.79 8.0 4.4 135 85.0
220 ± 10 % 55 0.79 7.5 5.0 125 80.0
270 ± 10 % 55 0.79 7.0 5.8 115 70.0
330 ± 10 % 55 0.79 6.5 6.4 110 65.0
390 ± 10 % 60 0.79 6.2 7.4 105 60.0
470 ± 10 % 60 0.79 5.7 9.5 92 58.0
560 ± 10 % 60 0.79 4.7 10.5 90 55.0
680 ± 10 % 60 0.79 4.5 11.8 80 50.0
820 ± 10 % 60 0.79 4.2 13.0 80 45.0
1000 ± 10 % 60 0.79 3.8 17.5 70 40.0
1200 ± 10 % 45 0.25 1.5 22.1 60 35.0
1500 ± 10 % 45 0.25 1.2 26.5 55 33.0
1800 ± 10 % 45 0.25 1.0 29.9 50 30.0
2200 ± 10 % 45 0.25 0.97 33.8 50 27.0
2700 ± 10 % 45 0.25 0.92 47.3 40 25.0
3300 ± 10 % 45 0.25 0.84 53.0 40 22.0
3900 ± 10 % 45 0.25 0.80 73.8 35 20.0
4700 ± 10 % 45 0.25 0.74 81.6 31 19.0
5600 ± 10 % 44 0.25 0.73 98.9 28 17.0
6800 ± 10 % 40 0.25 0.66 111.0 27 16.0
8200 ± 10 % 40 0.25 0.54 119.0 26 15.0
DESCRIPTION
IMS-5 10 µH ± 10 % ER e2
MODEL INDUCTANCE VALUE INDUCTANCE TOLERANCE PACKAGE CODE JEDEC LEAD (Pb)-FREE STANDARD
GLOBAL PART NUMBER INFORMATION
MODEL PACKING CODE INDUCTANCE VALUE TOL.
I M S 0 E R 1 0 0 K5
Document Number: 91000 www.vishay.com
Revision: 18-Jul-08 1
Disclaimer
Legal Disclaimer Notice
Vishay
All product specifications and data are subject to change without notice.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf
(collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein
or in any other disclosure relating to any product.
Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any
information provided herein to the maximum extent permitted by law. The product specifications do not expand or
otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed
therein, which apply to these products.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this
document or by any conduct of Vishay.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless
otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such
applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting
from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding
products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
