B2-42 APEMwww.apem.com
B2
10400 series
Professional pushbutton switches - threaded bushing Ø 10 (.393)
Distinctive features and specifications
❑CECC approved
MATERIALS
• Case : diallylphthalate (DAP)
• Actuator : brass, chrome plated
• Bushing : brass, nickel plated
• Housing : brass, nickel plated
• Contacts :
- silver
- gold plated silver
• Terminal seal : epoxy
ELECTRICAL SPECIFICATIONS
• Max. current/voltage rating with resistive load : 3A 24VDC
• Minimum load : 100µA 10mV
• Initial contact resistance : 10 mΩmax.
• Insulation resistance : 1.000 MΩmin. at 500VDC
• Dielectric strength :
1.000 Veff. 50 Hz min. between terminals of the same pole
2.000 Veff. 50 Hz min. between terminals and frame
2.000 Veff. 50 Hz min. between terminals of adjacent poles
• Electrical life : 50.000 cycles
GENERAL SPECIFICATIONS
• Torque : 1,50 Nm (1.106 Ft.lb)
max. applied to nut
• Operating temperature :
-40°C to +85°C
• Max. panel thickness :
3,5 mm (.138)
APPROVAL
Availability : consult factory for details of approved models.
Marking : to order switches marked CECC, add “CECC” to model number.
CECC 96401-001
Sealing boots are available to protect the switches against dust and water. They are presented in section H.
Mounting accessories : standard hardware supplied with all models : 1 knurled nut, 1 hex nut, 1 locking ring and 1
lockwasher. They are presented in section I.
Packaging unit : 25 pieces.
Dimensions : first dimensions are in mm while inches are shown as bracketed numbers.
ABOUT THIS SERIES
Complete part numbers are shown on the following page.
The company reserves the right to change specifications without notice.
09-Serie 10400-A_13-Serie 10400-A 04/11/14 14:46 Page42