MODEL M SERIES Thick Film Low Profile SIP Conformal Coated Resistor Networks ELECTRICAL Standard Resistance Range, Ohms Standard Resistance Tolerance, at 25C 22 to 1Meg 2% (G Tol.) Optional: 1% (F Tol.), 5% (J Tol.) -55C to +125C 200ppm/C 50ppm/C 100Vdc or PR 10,000 Megohms Operating Temperature Range Temperature Coefficient of Resistance Temperature Coefficient of Resistance Tracking Maximum Operating Voltage Insulation Resistance, Minimum ENVIRONMENTAL Thermal Shock plus Power Conditioning Short Time Overload Terminal Strength Moisture Resistance Mechanical Shock Vibration Shock Low Temperature Storage High Temperature Exposure Load Life, 1,000 Hours Resistance to Solder Heat (Per MIL-STD-202, Method 210, Cond.B) Dielectric Withstanding Voltage Marking Permanency Lead Solderability Flammability Storage Temperature Range R 0.50% R 0.25% R 0.25% R 0.50% R 0.25% R 0.25% R 0.25% R 0.50% R 1.00% R 0.25% 100V for 1 minute per MIL-STD-202, Method 215 per MIL-STD-202, Method 208 UL-94V-O Rated -55C to +150C Specifications subject to change without notice. 4-49 Model M Series 4 MECHANICAL Lead Material Substrate Material Resistor Material Body Material Solder Coated Steel Alloy Alumina Cermet Conformal Epoxy Resin STANDARD RESISTANCE VALUES, OHMS POWER DISSIPATION, WATTS AT 70C -3 Circuit (Isolated Resistors) & -1 Circuits (Bussed Resistors) Ohms Code Ohms Code Ohms Code 22 220 820 821 33K 333 27 270 1K 102 39K 393 33 330 1.2K 122 47K 473 39 390 1.5K 152 51K 513 47 470 1.8K 182 56K 563 51 510 2K 202 68K 683 56 560 2.2K 222 82K 823 68 680 2.7K 272 100K 104 82 820 3.3K 332 120K 124 100 101 3.9K 392 150K 154 120 121 4.7K 472 180K 184 150 151 5.1K 512 200K 204 180 181 5.6K 562 220K 224 200 201 6.8K 682 270K 274 220 221 8.2K 822 330K 334 270 271 10K 103 390K 394 330 331 12K 123 470K 474 390 391 15K 153 510K 514 470 471 18K 183 560K 564 510 511 20K 203 680K 684 560 561 22K 223 820K 824 680 681 27K 273 1Meg 105 ---- Resistor (Per Circuit) ---- Model Package M6 M8 M10 .6 .8 1.0 -1 -3 -5 .125 .125 .125 .200 .200 .200 .125 .125 .125 Circuit (D (Dual Terminators)) ual Terminators -5-5Circuit Ohms Code Ohms Code Ohms Code R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 R1/R2 3K/6.2K 302/622 180/390 181/391 330/390 331/391 220/270 221/271 330/470 331/471 220/330 221/331 330/680 331/681 4-50 Model M Series OUTLINE DIMENSIONS (Inch/mm) .095 Max. 2.41 .195 Max. 4.95 "L" Max. .140.020 3.560.51 .100.005 2.540.13 Pitch NonAccumulative .012.003 0.310.08 Centered on Package .020.004 0.510.10 # of Leads 4 5 6 7 8 9 10 11 12 13 14 Dim. "L" Max. .40 10.16 .50 12.70 .60 15.24 .70 17.78 .80 20.32 .90 22.86 1.00 25.40 1.10 27.94 1.20 30.48 1.30 33.02 1.40 35.56 4 SCHEMATICS -1 Circuit Bussed Resistors -3 Circuit Isolated Resistors 1 2 3 4 n 1 2 3 4 -5 Circuit Dual Terminator n 1 2 3 4 n TYPICAL PART MARKING Logo M 8 3 103 Lead #1 Indicator Date Code: (Optional Location) Resistance Code Model Series Circuit Type: -1 = Bussed -3 = Isolated -5 = Dual Terminator Number of Leads: 4 to 14 Note: Model # and number of leads not marked on 4 and 5 lead packages. 4-51 Model M Series PACKAGING Standard: Bulk: Option: Quantity 200 Units Tape in Ammo Box All Units oriented with lead #1 to the left of direction of feed. Tape: Width = 18mm Pitch = 12.7mm = 1,000 Units Ammo Box: Capacity Option: = Magazines Dimensions conform to EIA & JEDEC standards. All units oriented with lead #1 to the same side. Magazine: Material = Antistatic Plastic ORDERING INFORMATION M 8 5 331 / 471 J XX Packaging Option: AP = Ammo Pack M1 or M2 Tube* Model Series Number of Leads: 4 thru 14 Tolerance Code: F = 1% G = 2% (Standard) J = 5% Circuit Type: -3 = Isolated -1 = Bussed -5 = Dual Terminator Resistance Code: First 2 digits are significant (3 digits for 1%). Last digit denotes number of trailing zeros. R2 Resistance Code (Add for -5 circuit only) * Refer to Packaging for Automation Section (Page A-4) for M1 & M2 tube capacity and dimensions APPLICABLE DOCUMENTS MIL-R-83401 -- Resistor Networks, Fixed, Film, General Specifications MIL-STD-105 -- Sampling Procedures and Tables for Inspection by Attributes MIL-STD-202 -- Test Methods for Electronic and Electrical Component Parts 4-52 Model M Series