Angular range
Linearity 1±1% absolute (±0.5% check availability).
Programmable from 15 to 360 degrees (without dead band).
1 Others check availability.
Output Analog (Ratiometric), PWM, Serial Protocol.
Switch output Yes, programmable.
Angular Resolution
(depends on electrical angle and rotational speed) Serial Protocol (SPI): up to 14 bits.
Operating temperature -40ºC to +85ºC (-13ºF to + 158ºF)
Analog & PWM: up to 12 bits.
Supply voltage 1
Supply current
5V ±10%
Typ 8.5mA for single version
Typ 17mA for redundant version
Magnetic rotary angle and position sensor-control.
Piher Sensors & Controls SA
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Key features
Simple & Robust Magnetic
Design.
Multiturn.
Programmable switch output.
Programmable Linear Transfer
Characteristic:
(some positive slopes & one
negative slope can be
programmed in the same transfer
characteristic;
up to 4 programmable points; see
last page)
Self-Diagnostic features
Over voltage protection and
reverse voltage protection.
Also upon request:
True full redundant version.
Applications
Mechatronics
Electromechanical
Sensors
Controls
up to -40ºC to +125ºC
Rotational life
(depends on application and mounting) up to 50.000.000 cycles.
IP50
Operating temperature 1
Sealing 1
Mechanical specifications
Electrical specifications
Non-Contacting long life
angle/position sensor.
Absolute rotary position sensor
Pedal position Sensor.
Turn counter.
Throttle/EGR valve and gear
position sensor.
Height & suspension sensor.
Non-contacting potentiometer.
Float-level sensor.
Motor-shaft position sensor.
Precision robotics, material
handling, industrial equipment,
HVAC monitoring & control, etc.
The MTS-360 provides a true breakthrough in contactless sensor technology by combining a through-shaft design with
360º absolute position feedback in an ultra miniature size. The result is the smallest fully featured rotary sensor on the
market with reliability up to 50 million cycles.
With its tiny size of only 6mm x 17mm x 18mm (HxWxL), engineers can now integrate a fully featured rotary sensor directly
on their PCB without the packaging issues that typically accompany encoders or other absolute position devices. The
exceptionally low profile fits easily in places that were previously too small for pre-packaged rotary sensors.
This ultra-miniature MTS-360 Rotary Position Sensor is ideal in optical imaging stabilization and precision biomedical
devices, optical zoom devices, consumer electronics, instrumentation, HVAC systems, automotive
control systems, marine controls, fork lift trucks, farm equipment, cranes, low speed motor feedback, valve position
sensors and robotic and automation feedback system.
Contactless sensor.
MTS-360
Contactless sensor.
MTS-360
Piher Sensors & Controls SA
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Magnetic rotary angle and position sensor-control.
How to order.
Mechatronics
Electromechanical
Sensors
Controls
Simple output (SPI)
v
360º
SW On
SW Off
Positive slope
v
360º
SW On
SW Off
Negative slope
_
Temp. range
E = -40 to +85ºC
K= -40 to +125ºC
_
Type
1 = simple
_ _ _ _ _
Output
function
C0000
C0001
(see note 3)
_ _
Voltage
supply
05
_
S = SPI
Output1
Electrical
rotation
angle
ERA015
ERA016
....
ERA360
Other product configurations will be studied case by case.
MTS360
Series
_ _ _ _ _ _
_
Type
1 = simple
(see note 4)
PWM Frecuency (Hz.)1
F100
...
F999
_ _ _ __ _ _ _ _ _
Electrical
rotation
angle
ERA015
ERA016
....
ERA360
_
A = Analogic
P = PWM
Output1
(see note 1)
_ _ _ _ _
Output
function
C0000
C0001
(see note 3)
_ _
Voltage
supply
05
_
Temp. range
E = -40 to +85ºC
K= -40 to +125ºC
MTS360
Series
_ _
AA = Analogic
PP = PWM
Outputs
_
Type
2 = redundant
PWM Frecuency (Hz.)1
F100
...
F999
_ _ _ __ _
Voltage
supply
05
_
Temp. range
E = -40 to +85ºC
K= -40 to +125ºC
_ _ _ _ _
Output
function
C0002
C0003
(see note 3)
_ _ _ _ _ _
Electrical
rotation
angle
ERA015
ERA016
....
ERA360
(see note 4)
PWM Frecuency (Hz.)2
F100
...
F999
_ _ _ _
(see note 4)
(see note 1)
MTS360
Series
Redundant output (analogic / PWM)
Simple output (analogic / PWM)
Redundant output (SPI)
_ _
SS = SPI
Outputs
_
Type
2 = redundant
_ _
Voltage
supply
05
_
Temp. range
E = -40 to +85ºC
K= -40 to +125ºC
_ _ _ _ _
Output
function
C0002
C0003
(see note 3)
_ _ _ _ _ _
Electrical
rotation
angle
MTS360
Series
ERA015
ERA016
....
ERA360
Notes
(1) The analog output is a ratiometric output, proportional to input supply voltage.
(2) Leave empty if no applicable.
Switch function diagram:
(3) Other output functions available check availability.In the How To Order reference, enter CXXXX meanwhile the new output function reference is not defined.
(4) Leave empty if no applicable. Default frequency is 200 Hz
Contactless sensor.
MTS-360
6
3.05
17.6
1.2
4.05
18
Piher Sensors & Controls SA
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Magnetic rotary angle and position sensor-control.
Options.
Mechatronics
Electromechanical
Sensors
Controls
Dimensions.
Special outputs slopes and protocols.
Full redundant version with switches.
Energy harvesting versions.
Fast versions.
Connectors.
IP sealing.
Shaft interfaces.
Contact the factory for other options.
Recommended shaft.
1.8
1.6
7.5 7.5
2.3 2
2
8.5
1.15
5
2.2
11.6
8
1.15
3
4
+0
-0.05
+0
-0.05
+0
-0.05
Rotor is shown at zero position.
Sensor is delivered at random
position.
Contactless sensor.
MTS-360
1 2 3 4
8 7 6 5
Piher Sensors & Controls SA
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
Magnetic rotary angle and position sensor-control.
Mounting instructions.
Mechatronics
Electromechanical
Sensors
Controls
Connections scheme.
Electronic semiconductor products are sensitive to Electro Static Discharge (ESD).
Always observe Electro Static Discharge control procedures whenever handling semiconductor products.
Simple analog output version connection scheme.
* Melting point temp. depends on solder properties
Between 60-120 s
30-45 s
Max. temp 250ºCs
200ºC*
Preheat temp. 150ºC*
Room temp.
Heat used to
melt solder
paste
Recommended reflow profile.
1
2
3
4
5
6
7
8
Pin Description
Supply voltage
Supply voltage
Switch output*
Switch output*
Signal output**
Signal output**
Ground
Ground
The recommended reflow profile is provided as a guideline. Optimal profile may differ due to oven type, assembly layout or other design or process variables.
Customers should verify actual device performance in their specific application and reflow process. Please contact Piher if you require additional support.
* If the feature is not used in the application, please connect to ground
** Piher can supply the recommended wiring diagram
Contactless sensor.
MTS-360
Note: All Piher products can be adapted to meet customer´s requirements.
Due to continuous process improvement, specifications are subject to change without notice.
Please always use the datasheets published at our website www.piher.net for the most up-to-date information.
Magnetic rotary angle and position sensor-control.
Mechatronics
Electromechanical
Sensors
Controls
Piher Sensors & Controls SA
Our product competencies and services:
Potentiometers | Position / angle sensors | Rotary switches | Incremental encoders
Printed circuit resistors | Mechatronics | Value added assemblies
piher.sales@meggitt.com
www.piher.net
www.meggitt.com
Contact
Disclaimer
The product information in this catalogue is for reference purposes. Please consult for the most up to date and accurate design information.
Piher Sensors & Controls S.A., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Piher), disclaim any and all liability for
any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product described herein.
Piher disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent
permitted by law. The product specifications do not expand or otherwise modify Pihers terms and conditions of sale, including but not limited to the warranty expressed
therein, which apply to these products.
No licence, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Piher.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or
selling Piher products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Piher for any damages arising
or resulting from such use or sale. Please contact authorised Piher personnel to obtain written terms and conditions regarding products designed for such applications.
Product names and markings noted herein may be trademarks of their respective owners.
Information contained in and/or attached to this catalogue may be subject to export control regulations of the European Community, USA, or other countries. Each
recipient of this document is responsible to ensure that usage and/or transfer of any information contained in this document complies with all relevant export control
regulations. If you are in any doubt about the export control restrictions that apply to this information, please contact the sender immediately. For any Piher International
Corp. Exports, Note: All products / technologies are EAR99 Classified commodities. Exports from the United States are in accordance with the Export Administration
Regulations. Diversion contrary to US law is prohibited.
Output.
v080716
ISO 14001
BUREAU VERITAS
Certification Pb
A
c
c
o
r
d
i
n
g
t
o
E
L
V
(
2
0
0
0
/
5
3
/
E
C
)
/
R
o
H
S
2
(
2
0
1
1
/
6
5
/
E
U
)
C0002 (redundancy)
C0003 (redundancy)
0º 90º 180º 270º 360º
100%
90%
50%
10%
0%
%
CW
0º 90º 180º 270º 360º
100%
90%
45%
10%
0%
%
CW
20%
C0000
C0001
0º 90º 180º 270º 360º
100%
90%
50%
10%
0%
%
CW
0º 90º 180º 270º 360º
100%
90%
50%
10%
0%
%
CW
