G5V-2-H1 12DC - OMRON ELECTRONIC COMPONENTS

105

G5V-2 PCB Relay

Miniature Relay for Signal Circuits

■Wide switching power of 10 µA to 2 A.

■High dielectric strength coil-contacts:1,000 VAC;

open contacts: 750 VAC.

■Conforms to FCC Part 68 requirements.

■Ag + Au clad bifurcated crossbar contacts and

fully sealed for high contact reliability.

■New 150-mW relays with high-sensitivity.

Ordering Information

Model Number Legend

Specifications

■Coil Ratings

Standard Models

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.

2. Operating characteristics are measured at a coil temperature of 23°C.

3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

RoHS Compliant Refer to pages 16 to 17 for details.

RC FCC

Classification Contact form Contact type Contact material Enclosure ratings Model

Standard DPDT Bifurcated crossbar Ag + Au-Alloy Fully sealed G5V-2

High-sensitivity G5V-2-H1

Rated coil voltage

Note: When ordering, add the rated coil voltage to the model number.

Example: G5V-2 12 VDC

1. Contact Form

2: DPDT

2. Classification

H1: High-sensitivity

3. Rated Coil Voltage

3, 5, 6, 9, 12, 24, 48 VDC

G5V - - VDC

132

Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC

Rated current 166.7 mA 100 mA 83.3 mA 55.6 mA 41.7 mA 20.8 mA 12 mA

Coil resistance 18 Ω50 Ω72 Ω162 Ω288 Ω1,152 Ω4,000 Ω

Coil inductance

(H) (ref. value)

Armature OFF 0.04 0.09 0.16 0.31 0.47 1.98 7.23

Armature ON 0.05 0.11 0.19 0.49 0.74 2.63 10.00

Must operate voltage 75% max. of rated voltage

Must release voltage 5% min. of rated voltage

Max. voltage 120% of rated voltage at 23°C

Power consumption Approx. 500 mW Approx.

580 mW

106

G5V-2G5V-2

High Sensitivity Models

Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%.

2. Operating characteristics are measured at a coil temperature of 23°C.

3. The maximum voltage is the highest voltage that can be imposed on the relay coil.

■Contact Ratings

Note: P level: λ60 = 0.1 x 10–6/operation

This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value

may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual op-

erating conditions.

■Characteristics

Note: The above values are initial values.

Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method.

2. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking

the dielectric strength.

Rated voltage 3 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC 48 VDC

Rated current 50 mA 30 mA 25 mA 16.7 mA 12.5 mA 8.33 mA 6.25 mA

Coil resistance 60 Ω166.7 Ω240 Ω540 Ω960 Ω2,880 Ω7,680 Ω

Coil inductance

(H) (ref. value)

Armature ON 0.18 0.46 0.70 1.67 2.90 6.72 20.1

Armature OFF 0.57 0.71 0.97 2.33 3.99 9.27 26.7

Must operate voltage 75% max. of rated voltage

Must release voltage 5% min. of rated voltage

Max. voltage 180% of rated voltage at 23°C 150% of rated

voltage at

23°C

Power consumption Approx. 150 mW Approx.

200 mW Approx.

300 mW

Item Standard models High sensitivity models

Load Resistive load (cosφ = 1)

Rated load 0.5 A at 125 VAC; 2 A at 30 VDC 0.5 A at 125 VAC; 1 A at 24 VDC

Contact material Ag + Au-clad

Rated carry current 2 A

Max. switching voltage 125 VAC, 125 VDC

Max. switching current 2 A 1 A

Max. switching power 62.5 VA, 60 W 62.5 VA, 24 W

Failure rate (reference value)

(See note.) 0.01 mA at 10 mVDC

Item Standard models High sensitivity models

Contact resistance (See note 1.) 50 mΩ max. 100 mΩ max.

Operate time 7 ms max.

Release time 3 ms max.

Max. operating frequency Mechanical: 36,000 operations/hr

Electrical: 1,800 operations/hr (under rated load)

Insulation resistance (See note 2.) 1,000 MΩ min. (at 500 VDC)

Dielectric strength 1,000 VAC, 50/60 Hz for 1 min between coil

and contacts

1,000 VAC, 50/60 Hz for 1 min between con-

tacts of different polarity

750 VAC, 50/60 Hz for 1 min between contacts

of same polarity

1,000 VAC, 50/60 Hz for 1 min between coil

and contacts

1,000 VAC, 50/60 Hz for 1 min between con-

tacts of different polarity

500 VAC, 50/60 Hz for 1 min between contacts

of same polarity

Impulse withstand voltage 1,500 V (10 x 160 µs) between coil and contacts (conforms to FCC Part 68)

Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)

Malfunction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)

Shock resistance Destruction: 1,000 m/s2 (approx. 100G)

Malfunction: 200 m/s2 (approx. 20G)

Destruction: 1,000 m/s2 (approx. 100G)

Malfunction: 100 m/s2 (approx. 10G)

Endurance Mechanical: 15,000,000 operations min. (at 36,000 operations/hr)

Electrical: 100,000 operations min. (at 1,800 operations/hr)

Ambient temperature Operating: −25°C to 65°C (with no icing) Operating: −25°C to 70°C (with no icing)

Ambient humidity Operating: 5% to 85%

Weight Approx. 5 g

107

G5V-2G5V-2

■Approved Standards

UL478, UL1950, UL508 (File No. E41515)/CSA C22.2 No.0, No.14 (File No. LR31928)

Engineering Data

Contact form Coil ratings Contact ratings

G5V-2 G5V-2-H1

DPDT 3 to 48 VDC 0.6 A, 125 VAC (general use)

0.6 A, 110 VDC (resistive load)

2 A, 30 VDC (resistive load)

0.5 A, 125 VAC (general use)

0.2 A, 110 VDC (resistive load)

1 A, 24 VDC (resistive load)

Maximum Switching Power

G5V-2 Ambient Temperature vs.

Maximum Coil Voltage

G5V-2

Endurance

G5V-2

Switching current (A)

Switching voltage (V) Switching current (A)

Endurance (x10 operations)

Ambient temperature (°)

Maximum coil voltage (%)

Coil rated voltage

3 to 24 VDC

48 VDC

30-VDC

resistive

load

125-VAC resistive

load

123

AC resistive load

resistive

load

G5V-2-H1 G5V-2-H1G5V-2-H1

Switching current (A)

Switching voltage (V) Switching current (A)

Life expectancy (x10 operations)

Ambient temperature (°)

Maximum coil voltage (%)

AC resistive

load

DC resistive load

0.7

0.5

0.3

0.2

0.1

24-VDC resistive load

125-VAC resistive load

1000

500

300

100

3 to 24 VDC

48 VDC

200

180

160

140

120

100

Note: The maximum coil voltage refers to the

maxi-mum value in a varying range of

operating power voltage, not a continuous

voltage.

Note: The maximum coil voltage refers to the

maxi-mum value in a varying range of

operating power voltage, not a continuous

volta

108

G5V-2G5V-2

Dimensions

Note: 1. All units are in millimeters unless otherwise indicated.

2. Orientation marks are indicated as follows:

Precautions

Long-term Continuously ON Contacts

Using the Relay in a circuit where the Relay will be ON continu-

ously for long periods (without switching) can lead to unstable

contacts because the heat generated by the coil itself will affect

the insulation, causing a film to develop on the contact surfaces.

Be sure to use a fail-safe circuit design that provides protection

against contact failure or coil burnout.

Relay Handling

When washing the product after soldering the Relay to a PCB,

use a water-based solvent or alcohol-based solvent, and keep the

solvent temperature to less than 40°C. Do not put the Relay in a

cold cleaning bath immediately after soldering.

Terminal Arrangement/

Internal Connections

(Bottom View)

Mounting Holes

(Bottom View)

Tolerance: ±0.1

20.5 max.

20.3 typ.

10.1 max.

9.9 typ.

11.5 max.

11.4 typ.

0.5

3.5

7.62

0.30.5

7.62 5.08 5.08

(1.3)

7.62

(1.3)

Eight, 1-dia. holes

(1.2)

ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.

To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.

Cat. No. K046-E1-03