MF-RM005/240-0 - Bourns - Datasheet.Live

Environmental Characteristics

Operating Temperature .................................... -20 °C to +85 °C

Humidity Aging................................................. +85 °C, 85 % R.H. 1000 hours .........................±20 % typical resistance change

Passive Aging .................................................. +85 °C, 1000 hours ...........................................±20 % typical resistance change

Vibration .......................................................... MIL-STD-883C, Method 2007.1,.......................No change

Condition A

Solvent Resistance .......................................... MIL-STD-202, Method 215 ...............................No change

Test Procedures And Requirements For Model MF-RM Series

Item Test Conditions Accept/Reject Criteria

Visual/Mechanical ............................................ Verify dimensions and material .........................Per MF physical description

Resistance ....................................................... In still air @ 23 °C .............................................Rmin ≤ R ≤ R1max

Time to Trip ...................................................... 240 Vac, speciﬁ ed current ................................T ≤ max. time to trip

Hold Current .................................................... At Ihold ..............................................................No trip

Trip Cycle Life .................................................. 240 Vac, Imax, 100 cycles ................................No arcing or burning

Trip Endurance ................................................ a) 240 Vac, Imax, 24 hours ..............................No arcing or burning

b) 265 Vac, Imax, 30 mins.

Solderability ..................................................... MIL-STD-202, Method 208 ...............................95 % min. coverage

UL File Number .....................E174545 ........... http://www.ul.com/ Follow link to Certiﬁ cations, then UL File No., enter E174545

TÜV Certiﬁ cate Number ........50232433 ......... http://www.tuvdotcom.com/certiﬁ cates/50232433?locale=en&page_number=3

Electrical Characteristics

Model

Typical Current

Trip Limit Vmax Imax Initial

Resistance

One Hour

Post-Trip

Resistance

Max.

Time to Trip

Tripped

Power

Dissipation

Ihold

at 23 °C

Itrip

at 23 °C

Operating

Voltage

Interrupt

Voltage

Interrupt

Current

RMin.

at 23 °C

R1 Max.

at 23 °C at 23 °C PD Typ.

at 23 °C

(A) (A) (Vac) (Vac) (A) (Ohms) (Ohms) (A) (Sec.) (W)

MF-RM005/240 0.05 0.12 240 265 1.0 18.50 65.00 0.25 10.0 0.9

MF-RM008/240 0.08 0.19 240 265 1.2 7.40 26.00 0.40 10.0 0.9

MF-RM012/240 0.12 0.30 240 265 1.2 3.00 12.00 0.60 15.0 1.0

MF-RM016/240 0.16 0.37 240 265 2.0 2.50 7.80 0.80 15.0 1.4

MF-RM025/240 0.25 0.56 240 265 3.5 1.30 3.80 1.25 18.5 1.5

MF-RM033/240 0.33 0.74 240 265 4.5 0.77 2.60 1.65 21.0 1.7

MF-RM040/240 0.40 0.90 240 265 5.5 0.60 1.90 2.00 24.0 2.0

MF-RM055/240 0.55 1.25 240 265 7.0 0.45 1.45 2.75 26.0 3.4

Features

■ Radial leaded devices

■ Cured, ﬂ ame retardant epoxy polymer

insulating material meets UL 94V-0

requirements

■ Bulk packaging, tape and reel available

■ Resettable circuit protection

■ Agency recognition:

■ RoHS compliant* and halogen free**

Applications

■ Food blenders, coffee machines

■ HVAC

■ Electric fans, blowers

■ AC adaptors

MF-RM Series - PTC Resettable Fuses

* RoHS Directive 2002/95/EC Jan. 27, 2003 including annex and RoHS Recast 2011/65/EU June 8, 2011.

** Bourns follows the prevailing deﬁ nition of “halogen free” in the industry. Bourns considers a product to be “halogen free” if (a) the Bromine (Br) content is 900 ppm or less;

(b) the Chlorine (Cl) content is 900 ppm or less; and (c) the total Bromine (Br) and Chlorine (Cl) content is 1500 ppm or less.

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

*RoHS COMPLIANT

**HALOGEN FREE

MF-RX Series - PTC Resettable Fuses

Product Dimensions

Advantages

■ Resettable feature with overtemperature and overcurrent protection

can save expensive components from having to be replaced after

tripping, e.g., transformers with built in thermal fuses

■ Faster than bimetallic switch designs that take on average

approximately 30 seconds to cool down and reset

■ Generally lower electromagnetic interference than bimetallic switches

Beneﬁ ts

■ Reduced repair and replacement costs

■ Reduced nuisance tripping

■ Combined overcurrent and overtemperature protector in one device

Model A B C D E Physical Characteristics

Max. Max. Nom. Tol. ± Min. Max. Style Lead Dia. Material

MF-RM005/240 8.3 12.9 5.1 0.7 7.6 3.8

1 0.51

Sn/Cu

(0.327) (0.508) (0.201) (0.028) (0.299) (0.150) (0.020)

MF-RM008/240 8.3 12.9 5.1 0.7 7.6 3.8

1 0.51

Sn/Cu

(0.327) (0.508) (0.201) (0.028) (0.299) (0.150) (0.020)

MF-RM012/240 8.3 12.9 5.1 0.7 7.6 3.8

1 0.51

Sn/Cu

(0.327) (0.508) (0.201) (0.028) (0.299) (0.150) (0.020)

MF-RM016/240 9.9 13.8 5.1 0.7 7.6 3.8

1 0.51

Sn/Cu

(0.390) (0.543) (0.201) (0.028) (0.299) (0.150) (0.020)

MF-RM025/240 10.0 20.0 5.1 0.7 7.6 3.8

2 0.65

Sn/Cu

(0.394) (0.787) (0.201) (0.028) (0.299) (0.150) (0.026)

MF-RM033/240 11.4 20.0 5.1 0.7 7.6 3.8

2 0.65

Sn/Cu

(0.449) (0.787) (0.201) (0.028) (0.299) (0.150) (0.026)

MF-RM040/240 11.5 20.9 5.1 0.7 7.6 3.8

2 0.65

Sn/Cu

(0.453) (0.823) (0.201) (0.028) (0.299) (0.150) (0.026)

MF-RM055/240 14.0 22.4 5.1 0.7 7.6 4.1

2 0.81

Sn/Cu

(0.551) (0.882) (0.201) (0.028) (0.299) (0.161) (0.032)

Packaging options:

BULK: 500 pcs. per bag.

TAPE & REEL: 2000 pcs. per reel (MF-RM005/240~MF-RM040/240); 1000 pcs. per reel (MF-RM055/240)

LEAD

DIA. C

LEAD

DIA. C

Typical Part Marking

Represents total content. Layout may vary.

RM055

0220S

MANUFACTURER'S

TRADEMARK

PART

IDENTIFICATION

DATE CODE

(FIRST DIGIT =

LAST DIGIT OF YEAR;

NEXT THREE DIGITS =

DAY OF YEAR)

COUNTRY OF

MANUFACTURE

(T = TAIWAN

S = CHINA)

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data

sheet can and do vary in different applications and

actual device performance may vary over time.

Users should verify actual device performance in their

speciﬁ c applications.

MF-RM Series - PTC Resettable Fuses

Thermal Derating Chart - Ihold (Amps)

Model Ambient Operating Temperature

-20 ºC 0 ºC 23 ºC 40 ºC 50 ºC 60 ºC 70 ºC 85 ºC

MF-RM005/240 0.08 0.06 0.05 0.04 0.04 0.03 0.03 0.02

MF-RM008/240 0.12 0.10 0.08 0.07 0.06 0.05 0.04 0.03

MF-RM012/240 0.18 0.15 0.12 0.10 0.09 0.07 0.06 0.04

MF-RM016/240 0.24 0.20 0.16 0.13 0.11 0.10 0.08 0.05

MF-RM025/240 0.38 0.32 0.25 0.21 0.18 0.15 0.13 0.09

MF-RM033/240 0.50 0.42 0.33 0.27 0.23 0.20 0.17 0.11

MF-RM040/240 0.61 0.51 0.40 0.33 0.28 0.24 0.20 0.14

MF-RM055/240 0.80 0.68 0.55 0.46 0.40 0.35 0.29 0.22

0.51 (24AWG)

0.65 (22AWG)

0.81 (20AWG)

Style 1 Style 2

DIMENSIONS: MM

(INCHES)

MF-RM SERIES, REV. D, 11/14

How to Order

MF - RM 005 / 240 - 2

Multifuse®

Product Designator

Series

RM = Radial Leaded

Component

Hold Current, Ihold

005-055 (0.05 Amps - 0.55 Amps)

Operating Voltage, Vmax

240 = 240 Vac

Packaging Options

- 0 = Bulk Packaging

- 2 = Tape and Reel

*Packaged per EIA486-B

Typical Time to Trip at 23 ˚C

100

0.1

Fault Current (Amps)

Time to Trip (Seconds)

110

A = MF-RM005/240

B = MF-RM008/240

C = MF-RM012/240

D = MF-RM016/240

E = MF-RM025/240

F = MF-RM033/240

G = MF-RM040/240

H = MF-RM055/240

ABCDEF G H

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

MF-RM Series - PTC Resettable Fuses

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Carrier tape width W W 18 -0.5/+1.0

(.709) (-0.02/+.039)

Hold down tape width W0 W4 11

min.

(.433)

Hold down tape No protrusion

Top distance between tape edges W2 W

6 3

max.

(.118)

Sprocket hole position W1 W

5 9 -0.5/+0.75

(.354) (-0.02/+0.03)

Sprocket hole diameter D0 D

0 4 ±0.2

(.157) (±.079)

Abscissa to plane (MF-RM005/240~MF-RM016/240) H H 18.5 ±3.0

(.728) (±.118)

Abscissa to plane (MF-RM025/240~MF-RM055/240) H0 H

0 16 ±0.5

(.63) (±.02)

Abscissa to top (MF-RM005/240~MF-RM016/240) H1 H

1 32.2

max.

(1.268)

Abscissa to top (MF-RM025/240~MF-RM055/240) H1 H

1 45.0

max.

(1.772)

Overall width w/lead protrusion (MF-RM005/240~MF-RM016/240) C1 43.2

max.

(1.701)

Overall width w/lead protrusion (MF-RM025/240~MF-RM055/240) C1 56.0

max.

(2.205)

Overall width w/o lead protrusion (MF-RM005/240~MF-RM016/240) C2 42.5

max.

(1.673)

Overall width w/o lead protrusion (MF-RM025/240~MF-RM055/240) C2 56.0

max.

(2.205)

Lead protrusion I1 L

1 1.0

max.

(.039)

Protrusion of cutout L L 11

max.

(.433)

Protrusion beyond hold-down tape I2 I

2 Not speciﬁ ed

Sprocket hole pitch P0 P

0 12.7 ±0.3

(.500) (±.012)

Pitch tolerance 20 consecutive ±1

(±.039)

Device pitch (MF-RM005/240-MF-RM040/240) 12.7 ±0.3

(.500) (±.012)

Device pitch (MF-RM055/240) 25.4 ±0.6

(1.00) (±.024)

Tape thickness t t 0.9

max.

(.035)

Tape thickness with splice (MF-RM005/240~MF-RM040/240) t1 1.5

max.

(.059)

Tape thickness with splice (MF-RM055/240) t1 2.3

max.

(.091)

Splice sprocket hole alignment

0 ±0.3

(±.012)

Body lateral deviation Δh Δh 0

±1

(±.039)

Body tape plane deviation Δp Δp 0

±0.3

(±.012)

Lead seating plane deviation ΔP1 P

1 3.81 ±0.7

(.015) (±.028)

Lead spacing F F 5.08 +0.8/-0.5

(.200) (+.031/-.020)

MF-RM Series Tape and Reel Speciﬁ cations

Devices taped using EIA468–B/IEC60286-2 standards. See table below and Figures 1 and 2 for details.

DIMENSIONS: MM

(INCHES)

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

User direction of feed

Cross section A - B

Reference plane

H0W1

IEC EIA Dimensions

Dimension Description Mark Mark Dimensions Tolerance

Reel width (MF-RM005/240~MF-RM040/240) w w2 56.0

max.

(2.20)

Reel width (MF-RM055/240) w w2 63.5

max.

(2.50)

Reel diameter d a 370.0

max.

(14.57)

Space between ﬂ anges (MF-RM005/240~MF-RM040/240) h w1 48.0

max.

(1.89)

Space between ﬂ anges (MF-RM055/240) h w1 55.0

max.

(2.17)

Arbor hole diameter f c 26.0 ±12.0

(1.02) (±.472)

Core diameter h n 91.0

max.

(3.58)

Box 64 372 372

max.

(2.5) (14.6) (14.6)

Consecutive missing places 3 max.

Empty places per reel 0.1 % max.

MF-RM Series Tape and Reel Speciﬁ cations

Taped Component Dimensions - Figure 1

Reel Dimensions - Figure 2

Reel

Upper side

Tape

Lower side

User

direction

feed

DIMENSIONS: MM

(INCHES)

Speciﬁ cations are subject to change without notice.

The device characteristics and parameters in this data sheet can and do vary in different applications and actual device performance may vary over time.

Users should verify actual device performance in their speciﬁ c applications.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Bourns:

MF-RM005/240-0 MF-RM005/240-2 MF-RM008/240-0 MF-RM008/240-2 MF-RM012/240-0 MF-RM012/240-2 MF-

RM016/240-0 MF-RM016/240-2 MF-RM025/240-0 MF-RM025/240-2 MF-RM033/240-0 MF-RM033/240-2 MF-

RM040/240-0 MF-RM040/240-2 MF-RM055/240-0 MF-RM055/240-2