Document Number: 30102 For technical questions, contact: ww2aresistors@vishay.com www.vishay.com
Revision: 17-Feb-11 1
Wirewound Resistors,
Precision Power, Surface Mount
WSC, WSN
Vishay Dale
FEATURES
All welded construction
Molded encapsulation
Wraparound terminations
Excellent stability at different environmental
conditions
High power ratings (up to 3 W)
Superior surge capability
Available in non-inductive styles with Ayrton-
Perry winding (WSN in lieu of WSC, maximum
resistance is one-half WSC range)
AEC-Q200 qualified available (1)
Compliant to RoHS Directive 2002/95/EC
Note
(1) Flame retardance test may not be applicable to
some resistor technologies.
Notes
Part marking: 1/2 W - DALE, value; 1 W - model, value, tolerance, date code; 2 W and 3 W - DALE, model, value, tolerance, date code.
(2)
0.1 % and 0.25 % is available on the WSC2515 for 0.499
to 2.5 k
range.
(3)
As of 1/1/2010, the WSC0001 and WSC0002 are molded with thermoplastic in lieu of epoxy. Reference PCN-DR-002-2009 and PCN-DR-003-2009
Note
(4) WSC2515 only
STANDARD ELECTRICAL SPECIFICATIONS
GLOBAL
MODEL
HISTORICAL
MODEL
SIZE
POWER RATING P70 °C
W
RESISTANCE RANGE
TOLERANCE
± %
WEIGHT (typical)
g/1000 pieces
ENCAPSULATION
WSC01/2 WSC-1/2 2012 0.5 0.1 to 4.99
0.5, 1, 5
90 Epoxy
WSC0001 WSC-1 2515 1 0.1 to 2.77K
0.5, 1, 5
165 Thermoplastic (3)
WSC2515 WSC2515 2515 1 0.1 to 2.5K
0.1, 0.25, 0.5, 1, 5
(2)
165 Thermoplastic
WSC0002 WSC-2 4527 2 0.1 to 4.92K
0.5, 1, 5
760 Thermoplastic (3)
WSC4527 WSC4527 4527 2 0.1 to 4.92K
0.5, 1, 5
760 Thermoplastic
WSC6927 WSC6927 6927 3 0.1 to 8K
0.5, 1, 5
1675 Thermoplastic
TECHNICAL SPECIFICATIONS
PARAMETER UNIT WSC01/2 WSC0001 WSC2515 WSC0002
WSC4527/WSC6927
Temperature
Coefficient ppm/°C
± 50 = 1.0
to 4.99

± 90 = 0.1
to 0.99
± 20 = 26.51
and above;
± 50 = 1.0
to 26.5
;
± 90 = 0.1
to 0.99
± 20 = 26.51
and above;
± 50 = 1.0
to 26.5
;
± 90 = 0.31
to 0.99

± 150 = 0.1
to 0.3
± 20 = 10.0
and above;
± 50 = 1.0
to 9.9
;
± 90 = 0.1
to 0.99
± 20 = 10
and above;
± 50 = 1.0
to 9.9
;
± 90 = 0.31
to 0.99

± 150 = 0.1
to 0.3
Dielectric
Withstanding Voltage V
AC
> 500
Insulation Resistance
> 10
9
Operating
Temperature Range °C - 65 to + 175 - 65 to + 275
Maximum Working
Voltage V
(P x R)1/2
GLOBAL PART NUMBER INFORMATION
Global Part Numbering example: WSC2515R7000FEA
GLOBAL MODEL SIZE VALUE TOLERANCE PACKAGING SPECIAL
WSC
WSN 01/2
0001
2515
0002
4527
6927
R = Decimal
K = Thousand
R7000 = 0.70
1K500 = 1.5 k
B = ± 0.1 % (4)
C = ± 0.25 % (4)
D = ± 0.5 %
F = ± 1.0 %
G = ± 2.0 %
H = ± 3.0 %
J = ± 5.0 %
K = ± 10 %
EA = Lead (Pb)-free, tape/reel
EK = Lead (Pb)-free, bulk
TA = Tin/lead, tape/reel (R86)
BA = Tin/lead, bulk (B43)
(Dash number)
(Up to 2 digits)
From 1 to 99
as applicable
Historical Part Numbering example: WSC-1 0.7 1 % R86
WSC-1 0.7 1 % R86
HISTORICAL MODEL RESISTANCE VALUE TOLERANCE PACKAGING
* Pb containing terminations are not RoHS compliant, exemptions may apply
** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902
2515R7000FEASCW
www.vishay.com For technical questions, contact: ww2aresistors@vishay.com Document Number: 30102
2Revision: 17-Feb-11
WSC, WSN
Vishay Dale Wirewound Resistors,
Precision Power, Surface Mount
DIMENSIONS in inches (millimeters)
TEMPERATURE RISE DERATING
Note
(1) As of 1/1/2010, WSC0001 and WSC0002 will be molded with thermoplastic and have the higher 275 °C temperature derating.
Note
Embossed Carrier Tape per EIA-481.
GLOBAL
MODEL
DIMENSIONS SOLDER PAD DIMENSIONS
L H T W W1AB L
WSC01/2 0.200 ± 0.020
(5.08 ± 0.508)
0.096 ± 0.015
(2.44 ± 0.381)
0.040 ± 0.010
(1.02 ± 0.254)
0.125 ± 0.005
(3.18 ± 0.127)
0.050 ± 0.010
(1.27 ± 0.254) 0.085 (2.16) 0.070 (1.78) 0.080 (2.03)
WSC0001 0.250 ± 0.020
(6.35 ± 0.508)
0.110 ± 0.015
(2.79 ± 0.381)
0.045 ± 0.010
(1.14 ± 0.254)
0.150 ± 0.005
(3.81 ± 0.127)
0.098 ± 0.005
(2.49 ± 0.127) 0.090 (2.29) 0.115 (2.92) 0.115 (2.92)
WSC2515 0.250 ± 0.020
(6.35 ± 0.508)
0.110 ± 0.015
(2.79 ± 0.381)
0.045 ± 0.010
(1.14 ± 0.254)
0.150 ± 0.005
(3.81 ± 0.127)
0.098 ± 0.005
(2.49 ± 0.127) 0.090 (2.29) 0.115 (2.92) 0.120 (3.05)
WSC0002 0.455 ± 0.020
(11.56 ± 0.508)
0.167 ± 0.010
(4.24 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
0.275 ± 0.005
(6.98 ± 0.127)
0.215 ± 0.005
(5.46 ± 0.127) 0.155 (3.94) 0.230 (5.84) 0.205 (5.21)
WSC4527 0.455 ± 0.020
(11.56 ± 0.508)
0.167 ± 0.010
(4.24 ± 0.254)
0.100 ± 0.010
(2.54 ± 0.254)
0.275 ± 0.005
(6.98 ± 0.127)
0.215 ± 0.005
(5.46 ± 0.127) 0.155 (3.94) 0.230 (5.84) 0.205 (5.21)
WSC6927 0.690 ± 0.032
(17.53 ± 0.813)
0.280 ± 0.015
(7.11 ± 0.381)
0.100 ± 0.010
(2.54 ± 0.254)
0.275 ± 0.005
(6.98 ± 0.127)
0.215 ± 0.015
(5.46 ± 0.381) 0.155 (3.94) 0.235 (5.97) 0.470 (11.94)
W
L
T
W1
H
l
a
b
0 0.5 1.0 1.5 2.0 2.5 3.0
Power in W
200
150
100
50
0
WSC0001
WSC2515
WSC01/2
WSC6927
WSC0002
WSC4527
Temperature Rise in °C
- 65 - 25 25 75 125 175 225 275
Ambient Temperature in °C
120
100
80
60
40
20
0
70
WSC01/2
Rated Power in %
WSC0001 (1)
WSC0002 (1)
WSC2515
WSC4527
WSC6927
PERFORMANCE
TEST CONDITIONS OF TEST TEST LIMITS
Thermal Shock - 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme ± (0.5 % + 0.05 ) R
Short Time Overload 5 x rated power for 5 s ± (0.2 % + 0.05 ) R
Low Temperature Storage - 65 °C for 24 h ± (0.2 % + 0.05 ) R
High Temperature Exposure 1000 h at + 275 °C (+ 175 °C for WSC01/2) ± (0.5 % + 0.05) R
Bias Humidity + 85 °C, 85 % RH, 10 % bias, 1000 h ± (0.2 % + 0.05 ) R
Mechanical Shock 100 g’s for 11 ms, 5 pulses ± (0.1 % + 0.05 ) R
Vibration Frequency varied 10 Hz to 500 Hz in 1 min, 3 directions, 9 h ± (0.1 % + 0.05 ) R
Load Life 1000 h at rated power, + 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.05 ) R
Resistance to Solder Heat + 260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.05) R
PACKAGING
MODEL REEL
TAPE WIDTH DIAMETER PIECES/REEL CODE
WSC01/2 12 mm/embossed plastic 330 mm/13" 2000 EA/TA
WSC0001/WSC2515 16 mm/embossed plastic 330 mm/13" 2000 EA/TA
WSC0002/WSC4527 24 mm/embossed plastic 330 mm/13" 1200 EA/TA
WSC6927 32 mm/embossed plastic 330 mm/13” 725 EA/TA
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 02-Oct-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.