1
62 GB- Series Receptacles
Miniature Bayonet Lock Connectors
Complies with MIL-C-26482 CE-2Ra
T
his miniature bayonet lock connector series offers desi
g
ners
important features not found in any other range of connectors.
They are developed and manufactured entirely in the U.K.
by AMPHENOL Ltd., and have full qualification approval to
British Standards Specification BS 9522 F0017 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
A
mphenol
This catalogue to be used in conjunctio n with Catalogues:
CE-2 Pa – 6 2 GB Serie s Plugs
CE-2Aa – 62GB Series Accessories
2
62GB and
Pattern 608
New Planforms
Current:
(a) Maximum current per individual contact (in isolation)* at ambient
temperature of 85°C
Contact size 12: 23 A
(b) Maximum current per contact through all contacts simultaneously at
an ambient temperature of 85°C
Contact size 12: 20 A
Current:
(a) Maximum current per
individual contact (in
isolation)* at ambient
temperature of 85°C
Contact size 8: 45 A
(b) Maximum current per contact
through all contacts
simultaneously at an ambient
temperature of 85°C
Contact size 8: 40 A
Sea level 8500m (27,900ft) 21,340m (70,OOOft)
1013 mbar g 320 mbar 44 mbar
Voltage rating I II III I II III I II III
Working voltages ** 700 1200 1500 550 650 800 330 380 450
(nominal)
d.c. or a.c. peak
Voltage proof 2100 3000 3000 1100 1300 1300 660 760 750
d.c. or a.c. peak
* i.e. when only one contact per connector is electrically loaded.
g 1 mbar=102 N/m2=100 Pa
** Establishment of electrical safety factors is the responsibility of the user
CONTENTS Page
Amphenol 62GB Solder Connectors 4
Schedule of Tests 5-6
Connector Styles Available 7
Insert Availability 9-10
Ordering 62GB Series Connectors 11-12
Box Mounting Receptacles - Table of Styles 13-14
Box Mounting Receptacles 15-19
Single Hole Fixing Receptacles - Table of Styles 20-22
Single Hole Fixing Receptacles 23-30
Cable Mounting Receptacles - Table of Styles 31
Cable Mounting Receptacles 32-34
Insert Orientations 35
Key/Keyway Orientations 36
4
Amphenol ® 62GB
solder connectors
T
his miniature bayonet lock connector series offers
designers important features not found in any other range
of connectors. The range has full qualification approval to
British Standards Specification BS 9522 FOO 17 and British
Defence Specification DEF STAN 59-35 (Part 3) Sec. 7.
62GB Series connectors - developed and manufactured
entirely in the United Kingdom by Amphenol Limited. They
are the first and only British connectors to have achieved
this. A doubly strong position which Amphenol are well
geared to handle. The manufacturing facil ities of the
Whitstable plant have been cited as exemplary in Europe.
Certainly the layout is extensive and extremely efficient;
safety awards have been attained every time returns have
been submitted to the British Safety Council.
62GB Series connectors have been well established with
Government authorities on an international scale and users
can be found in Sweden, Denmark, Norway, Finland,
Germany, Spain, Holland, India, Canada and Italy.
Derating
Connectors must be derated under the following
operating conditions:
1. At elevated ambient temperatures, the current ratings
are reduced so that total maximum hot spot
temperature of 125°C is not exceeded.
2. At high altitudes, revised voltage ratings become
effective as shown on page 7.
3. When connectors to different specifications are
intermated (e.g. BS 9522 FOO 17 and
MIL-C26482), the combination must not be
operated under conditions more severe than the
less stringent clause of either specification.
Amphenol 62GB connectors are designed to meet
the most stringent requirements of both
specifications.
Military Specifications
British Standards Specification BS 9522 FOO 17
closely corresponds to the United States Military
Specification MIL-C-26482 solder terminations.
Certain differences exist between the schedules which
can be seen on pages 2 and 3.
Approved gauges are used to check interchangeability
of 62GB series with other connectors manufactured to
BS 9522 FOO 17 or MIL-C-26482.
Basic Construction
62GB Series can be supplied in brass or stainless steel.
The normal shell finish used, which has a high resistance to
corrosion, is zinc cobalt olive drab. Other finishes may be
supplied to special order, such as cadmium plate which is
available by adding deviation (714) to the end of part
number.
Inserts are of polychloroprene rubber compounded to an
Amphenol specification. Operating temperature range is
-55°C to 125°C, and the connectors have gold-plated
contacts designed for soldered connections. Configurations
for size 20 contacts range between 2 contacts in the size 8
12.7mm (0.5in diameter) shell up to a maximum of 61
contacts in the size 2436.1 mm (1.5in diameter) shell.
Intermediate sizes, and contact data for heavier current
ratings are shown in the insert availability chart on page 6
and 7.
Hermetic connectors with glass sealed dialectric are
manufactured with mild steel shells and nickel iron
contacts plated tin over copper.
* Other finishes ar e available on request.
Protection Agai nst Mis-Mating or Cross-Plugging
In BS 9522 FOO 17 positive shell-to-shell keying is
provided with keys and keyways in a choice of either the
normal (N) or any of the four preferred alternate
positions: B, C, E and F. This prevents mismating between
shells of different orientations and overcomes the
difficulties associated with rotated inserts and a standard
key-keyway orientation. In the latter system, damage to
the inserts or contacts can result if excessive force is used
to engage non-mating pairs.
Rotated inserts are, however, permissible in BS 9522 FOO
17 connectors if required to mate with or replace units to
MIL-C-26482 mounted in existing equipment. Connectors
have normal orientations manufactured to BS 9522 FOO 17
or MIL-C-26482 are fully intermateable as also are
connectors with inserts in positions W, X, Y or Z.
1
This catalogue to be used in conjunction with Catalogues:
CE-2Pa – 62GB Series Receptacles
CE-2Aa – 62GB Series Accessories
5
Schedule of Tests
Required for Qualification
Approval
Tests
Visual Examination
Dimensions, outline mass(including
contacts) Compatability Gauging
procedure
Polarization
Engaging and sepa rating force, connector
Contact Holding Force
Sealing (air pressure)
Sealing Hermetic
Contact Resistance
Housing (Shell) Continuity
In sulation Resistance
Voltage Proof
Soldering
Bumping
Vibration
Shock
Acceleration (Steady State)
Rapid Change of Temperature
Climatic Sequence
Flammability
Damp Heat (Steady State)
Brief Description
Engagement max: 0,90 Nm (8.0 lbf.in.) to
4,97 Nm (44 lbf.in.) according to shell size.
Separation min: 0,22 Nm (2.0 lbf.in.) to 1,58
Nm (14.0 lbf.in .) according t o shel l size.
0,21 N (0.047 lbf) min.size 20
0,56 N (0.126 lbf)min. size 16
Max leakage 28,53 uNm/s (1 cm3/h), 1
bar (14.5 p.s.i.) differential.
Hermetic rec eptacle s have a max leak of 0.1 mic ron
cubic foot per hour (1 x 10-6Cm3/s)
5 milliohms max.
200 milliohms max. 5 milliohms max.
grounding spring styles.
5,000 Megaohms at 500 - 50 V d.c.
See page 7. Duration 1 minute
As BS 9520: 1974, Clause 1.2.6.6,
Method 2.
As BS 9520: 1974, Clause 1.2.6.1. 4,000
-10 bumps / 390m / s2 (40 gn).
As BS 9520: 1974, Clause 1.2.6.2.1. Procedure A. 10 Hz
to 5000 Hz, 0.75 mm / 10 gn.
As BS 9520: 1974, Clause 1.2.6.3. 981
m/s2 (100 g n).
As BS 9520: 1974, Clause 1.2.6.4. 490
m/s2 (50 gn).
As BS 9520: 1974, Clause 1.2.6.7. -550
C to - 1250 C.
As BS 9520: 1974, Clause 1.2.6.11.
Severity 55/125/56.
As BS 9520: 1974, Clause 1.2.6.8. Direct
flame applied, duration 1 minute.
As BS 9520: 1974, Clause 1.2.6.14.
Severity 56 days.
6
Schedule of Tests
Required for Qualification
Approval
Tests Brief Description
Immersion (at low air pressure)
Mechanical Endurance
High Temperature Endurance
Mould Growth
Salt Mist
Dust
Robustness of Terminations
Contact Retention (in in sert)
Insert Retention (in shell)
Test Prod Damage
Impact
Grounding Spring Holding Force Plugs
with gr ounding springs only.
Fluid Resistance
Compass Safe Distance
3 cycles at 30 mins each cycle, total imm ersion in
water at pressure 44 m bar.
500 operations minimum
Long term: 1,000 hrs. at 850C ambient carrying the
specified current. Short term: 250 hrs at 1250C, no
current.
As BS 9520: 1983, Clause 1.2.6.16
28 days duration.
As BS 9520: 1983, Clause 1.2.6.17.
Severity 1.
As BS 9520: 1983, Clause 1.2.6.18
Exposure 30 minutes.
44,5 N (101bf) size 16
22,2 N (5 lbf) size 20
67,0 N (15 lbf) min. size 20
112,0 N (25 lbf) min. size 16
517 KN1m2 (751bf/in2) min.
Moment: 0,056 Nm (0.5 lbf in) size 20
0,225 Nm (2 lbf in) size 16
Five impacts, drop height 1 m (3ft.3 in.).
1,17 N (0.263 lbf) to 2,74 N (0.616 lbf)
acco rding to si ze.
Immersion in 4 solvents and 9 fluids
including aircraft fuels, lubricating oils and
hydraulic fluids.
As BS 9520: 1974, Clause 1.2.5.11. 127
mm (5.0 in) min .
7
Connector Styles
Available
Receptacles
Box Mounting
See Pages 13-19
A
ccessories
See Catalogue CE-2Aa
Single Hole Mounting
See Pages 20-30
Cable Mounting
See Pages 31-34
Hermetic Seal
See Pages 19 & 26
8
9
Insert Availability
NOTES
* This insert arrangeme nt is not incl uded in B.S.
spec., but is available and. listed in MIL-C-26482.
g Due to the arrangement of contacts in the
14-12 insert arrangement it is classified, for
current derat i ng , in the shel l size ra ng e 18-24.
Lettering of inserts shown above corresponds to view of fron t
(mating surface of pi n inserts or rear face (cable accessory
end) of socket inserts.
KEY • No 16 size contact s
O
No 20 size contacts
CURRENT RATING
Maximum current per individual contact (in isolation) at a
maximum ambient temperature o f 85°C: Size 20 contact 7.5A
Size 16 contact 13-OA The performance of 62GB Series
connectors at all times exceeds the maximum c ontinuous
bunched rating of the app ropriate size wire, or cable of
equiva lent temperature rating. This bunched rating i s therefore
the determining factor. In the case of mixed loadings, the
greatest individual load shall be the bunched loading. In any
combination of ambient temperature plus temperature rise due
to current flow through the contacts, the maximum connector
internal hot spot temperature of 125°C must not be exceeded.
That is, when only one contact per connector is load ed.
10
Insert Availability
V
OLTAGE RATINGS
ALTITUDE-THOUSANDS OF FEET (METRES)
Relationship between flashover voltage and
altitude for each v oltage rating
VOLTAGE RATINGS
Two categories of voltage rating are spe cified in
BS9522 F0017 , F0 038 and N0001.
Rating 1 (700V d.c. working at sea-level) Applicable to the
high contact density inserts shown in the upper sect ion of the
insert availability diagram above.
Rating 2 (1200V d.c. working at sea-leve l) Applicable to
the inserts shown in the lower sect ion of the insert
availability diagram.
Altitude derating. Informatio n on volt a ge d e rat in g fo r
opera tion at altitudes above sea-level can be obtained from
the flashover voltage altitude curves on the left.
22
22-55
D.C.
WORKING
V
OLTAGE
A.C.
WORKING
VOLTAGE
R.M.S.
PROOF
VOLTAGE
D.C. OR A.C.
PEAK
Rating 1
Sea level
300 mb at
20°C
8,500m
(27,800 ft)
44 mb at
20°C
20,000m
(66,000 ft)
Rating 2
Sea level
300 mb at
20°C
8,500m
(27,800 ft)
44 mb at
20"C
20,000m
(66,000 ft)
700
550
330
120
650
380
500
390
230
850
460
270
2100
1100
660
3000
1300
760
24
A
LTITUDE
24-61
11
Ordering
62GB Series
Connectors
To obtain the specific connector required write down the connector number from the
typical example below. Only inserts shown in the availability chart on p. 10&11 can be
specified. All connectors are delivered with protective dust covers
62GB SHELL STYLE
14E
Environmental cod e
A - Plain shell, exposed
solder buckets. No
grommet
E - Insert seal and grommet seal
with grommet nut (excluding
12E which has plain shell and
no gro mme t or nu t)
F - As (E) but grommet nut
has integral strain relief
clamp
H - Hermetic seal no cable
accessories
J - As (E) but with resilient gland
seal and nut for unscreened
jacketed cable. No grommet
supplied. See pp. 26-27 for
accessory to accept
screened jacketed cable.
P - Potting construction
complete with potting
mould
T - Exposed solder buckets.
Threaded shell for cable
accessories
Shell style
0 - Receptacle wall mounting
1 - Receptacle cable
mounting
2 - Receptacle box mounting
3 - Receptacle, solder flange
mounting
4 - Receptacle, internally
threaded with cable
accessories as illustrated, for
single hole mounting
6 - Plug cable mounting
7- Receptacle, plain shell,
sin
g
le hole mountin
g
Specification key
1 - Styles originally specified in
MIL-C-26482
5 - Styles exclusive to
BS9522 F0017
Series designation
62 GB - Aluminium shell
62 GB SS -Stainless steel shell*
62 GB CU - Brass shell*
*consult factory for availability
62GB-XXH-Hermetic mild
steel shell.
HOW TO ORDER FROM MS CONNECTOR NUMBERS
Connector numbers in the AMPHENOL and MS numbering systems. Only alternative insert orientations are specif ied
in MIL-C-26482 which does not include alternative key/keyway orientations.
MS31 - 14 E 18 -11 P X
62GB - 14 E 18 -11 P X
12
Ordering
62GB Series
Connectors
INSERT ARRANGEMENT
18 11 P B (044)
Shell size (in sixteenths of an
inch) 8, 10, 12, 14, 16
18,20,22,24
Number of conta ct s
2, 3, 4, 5, 6, 7, 8, 10, 11, 12,
16, 19, 21', 23, 26, 32, 41, 55,
61
* consult factory for availability
Contact Style
P - Pins
S - Sockets For hermetic
connectors. P3 denotes pin
contacts with solder bucket
terminations. (Standar d ran ge).
P2 denotes pin contacts with
flattened and pierced
terminations.
(Special order).
Orientation
(Omit if normal orientation)
Keys/Keyways: A', B, C, D',
E. F, (see p. 31)
Inserts: W,X,Y,Z.(see p56/57)
*Inactive for new desi
g
ns
Deviations
(044) Rough grip heavy duty
coupling ring.
(046) Box mounting plug.
(214)Fitted wit h exte nsion
back shell and strain
relief clamp without
grommet on F types
only
(218) Lever coupling ring
(219)Contacts for flexible punted
wrung (57A and 12E only)
(639) Bright cadmium plated
shells
(345) Contacts for flexible punted
wiring 12H,13H 17H only
(276) Hermetics with gold
plated contacts.
(608) Black anodise.
(416) Electroless nickel
(714) Cadmium plate
olive drab
HOW TO ORDER FROM B.S. CONNECTOR NUMBERS
Select the connector style by reference to BS9522 F0017 using the code below for identification. Note that the B.S.
Specification includes only certain connectors from the table of styles as shown on pp. 8 & 9. Alternative
key/keyway orientations are pre ferred in the BS9522 F0017 Specifi cation to prevent mis-mating. However, rotated
inserts are permissible where connectors are required to mate with or replace items to MIL-C-26482 on existing
equipment.
62GB - 14E
C2098 18-11
18 11 P
M B
B O
Style Insert
Arrangement,
see above M - Pin contacts
F - Socket contacts
Alternative
Ke y/Ke y way
Orientation
Variant.
0 – Standard
connector
13
Box Mounting
Receptacles
Table of Styles
62GB-50
T
Page No.
15
62GB-10
A
15
62GB-10E 16
62GB-10F 16
62GB-10J 17
62GB-10P 17
62GB-12E 18
14
Pa
g
e No.
62GB-12E(219) 18
62GB-12H
Hermetic Seal 19
Box Mounting
Receptacles
Table of Styles
15
Shell
Size A
max B
± 0.005
(± 0.13)
c
max
sq.
D
TP
Sq.
E dia.
± 0.010
(± 0.254)
F
±0 005
(± 0.13)
G
dia
max.
Y
dia.
max.
X
Thread
0.978 0.062 0.817 0.594 0120 0.445 0.434 0.473
08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 12.02 7/16 – 28 UNEF
0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.590
10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 14.99 9/16 – 24 NEF
0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.750
12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 19.05 11/16 - 24 NEF
0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.875
14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 22.23 13/16 – 20 UNEF
0.978 0.062 1.223 0.969 0.120 0.445 0.933 1.000
16 24.84 1.58 31.07 24.61 3.05 11.3 23.7 25.4 15/16 – 20 UNEF
0.978 0.062 1.317 1.062 0.120 0.445 1.057 1.125
18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 28.58 1.1/16 - 18 NEF
1.048 0.080 1.442 1.156 0.120 0.555 1.182 1.250
20 26.62 2.03 36.63 29.36 3.05 1410 30.02 31.75 1.3/16 - 18 NEF
1.048 0.080 1.567 1.250 0.120 0.555 1.307 1.375
22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 34.93 1.5/16 - 18 NEF
1.048 0.080 1.692 1.375 0147 0.590 1.432 1.500
24 26.62 2.03 42.98 34.93 3.d4 14.99 36.37 38.1 1.7/16 – 18 NE F
Shell
Size A
max. B
± 0.005
( ± 0.13)
C
Max.
sq.
D
TP
sq.
E
± 0.010
( ± 0.254)
F
± 0.005
( ± 0.13)
G
dia
max.
Y
dia.
max.
M
1.624 0.062 0.817 0.594 0.120 0.445 0.561 0.473
08 41.25 1.58 20.75 15.09 3.05 11.3 14.25 12.02 1/2 - 28 UNEF
1.624 0.062 0.942 0.719 0.120 0.445 0.686 0.590
10 41.25 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5/8 - 24 NEF
1.624 0.062 1.036 0.812 0.120 0.445 0.811 0.750
12 41.25 1.58 26.32 20.63 3.05 11.3 20.60 19.05 3/4 - 20 UNEF
1.624 0.062 1.130 0.906 0.120 0.445 0.936 0.875
14 41.25 1.58 28.70 23.10 3.05 11.3 23.78 22.23 7/8 - 20 UNEF
1.624 0.062 1223 0.969 0.120 0.445 1.061 1.000
16 41.25 1.58 31.07 24.61 3.05 11.3 26.98 25.4 1 - 20 UNEF
1.624 0.062 1.317 1.062 0.120 0.445 1.186 1.125
18 41.25 1.58 33.45 26.58 3.05 11.3 30.12 28.58 1.3/1 6 - 18 NEF
1 .687 0.080 1.442 1.156 0.120 0.555 1.311 1 250
20 42.85 2.03 36.63 29.36 3 05 14.10 33.30 31.75 1.3/1 6 - 1 8 NEF
1.687 0.080 1.567 1.250 0.120 0.555 1.436 1.375
22 42.85 2.03 39.80 31.75 3.05 14.10 36.47 34.93 1.7/16 - 1 8 NEF
1.730 0.080 1.692 1.375 0 147 0.590 1.561 1.500
24 43.94 2.03 42.98 34.93 3.73 14.99 39.65 38.1 1.7/16 - 1 8 NE F
Box Mounting
Receptacles
50T 62GB-50T
BS9522-C2096
4-hole flange mounting with threaded shell to
accept standard cable accessories.
10A 62GB-10A
4-Hole flange mounting with general
duty back shell. No grommet supplied.
16
Box Mounting
Receptacles
10E 62GB-10E
MIL-C-26482 MS3 11 0E
Shell A B C D E F G V
Size max ± 0.005 max TP ± 0.010 ± 0.005 dia dia.
( ± 0.13) sq. sq. (± 0.254) (± 0.13) max max
1.281 0.062 0.817 0.594 0.120 0.445 0.561 0.473
08 32.54 1 .58 20.75 15.09 3.05 11.3 14.25 12.02
1.281 0.062 0.942 0.719 0.120 0.445 0.686 0.590
10 32.54 1.58 23.93 18.26 3.05 11.3 17.43 14.99
1.281 0.062 1.036 0.812 0.120 0.445 0.811 0.750
12 32.54 1.58 26.32 20.63 3.05 11.3 20.60 19.05
1.281 0.062 1.130 0.906 0.120 0.445 0.936 0.875
14 32.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23
1.281 0.062 1.223 0.969 0.120 0.445 1.061 1.000
16 32.54 1.58 31.07 24.61 3.05 11.3 26.98 25.4
1.281 0.062 1.317 1.062 0.120 0.445 1.186 1.125
18 32.54 1.58 33.45 26.58 3.05 11.3 30.12 28.58
1.383 0.080 1.442 1.156 0.120 0.555 1.311 1.250
20 35.13 2.03 36.63 29.36 3.05 14.10 33.30 31.75
1.383 0.080 1.567 1.250 0.120 0.555 1.436 1.375
22 35.13 2.03 39.80 31.75 3.05 14.10 36.47 34.93
1 .383 0.080 1.692 1.375 0.147 0.590 1.561 1.500
24 35.13 2.03 42.98 34.93 3.74 14.99 39.65 38.1
10F 62GB-10F
MIL-C-26482 MS3 1 10F
Shell A B C D E F G H Y
Size max. ± 0.005 max. TP ± 0.010 ± 0.005 dia ± 0.005 dia.
(± 0.13) sq. Sq. (± 0.254) (± 0.13) max. (± 0.13) max.
1.762 0.062 0.817 0.594 0.120 0.445 0.828 0.156 0.473
08 44.76 1.58 20.75 15.09 3.05 11.3 21.03 3.96 12.01
1.762 0.062 0.942 0.719 0.120 0.445 0.891 0.188 0.590
10 44.76 1.58 23.92 18.26 3.05 11.3 22.63 4.78 14.99
1 .762 0.062 1.036 0.812 0.120 0.445 1.016 0.312 0.750
12 44.76 1.58 26.31 20.63 3.05 11.3 25.81 7.93 19.05
1.736 0.062 1.130 0.906 0.120 0.445 1.141 0.375 0.875
14 44.10 1.58 28.70 23.10 3.05 11.3 28.98 9.58 22.23
1.876 0.062 1.223 0.969 0.120 0.445 1.203 0.500 1.000
16 47.65 1.57 31.07 24.61 3.05 11.3 30.56 12.7 25.4
1.876 0.062 1.317 1.062 0.120 0.445 1.426 0.625 1.125
18 47.65 1.58 33.45 26.58 3.05 11.3 36.22 15.87 28.58
2.118 0.080 1.442 1.156 0.120 0.555 1.426 0.625 1.250
20 53.80 2.03 36.63 29.36 3.05 14.10 36.22 15.88 31.75
2.118 0.080 1.567 1.250 0.120 0.555 1.567 0.750 1.375
22 53.80 2.03 39.80 31.75 3.05 14.10 39.80 19.05 34.93
2.250 0.080 1.692 1.375 1.147 0.590 1.735 0.800 1.500
24 57.15 2.03 42.98 34.93 3.74 14.99 44.07 20.32 38.10
4-hole flange mounting with grommet
and grommet nu t
4-hole flange mounting with grommet and
grommet nut fitted with integral strain relief
clamp
17
Box Mounting
Receptacles
Shell
Size A
max B
± 0.005
( ± 0.13)
c
max.sq D
TP
sq
E
± 0.010
( ± 0.254)
F
± 0.005
(± 0.13)
G
dia.
max.
Y
dia
max
Z Cable Entry
min max
closed free
1.846 0.062 0.817 0.594 0.120 0.445 0.561 0.473 0.168 0.230
08 46.89 1.58 20.75 15.09 3.05 11.3 14.25 12.02 4.28 5.84
1.846 0.062 0.942 0 .719 0.120 0.445 0.686 0.590 0.205 0.312
10 46.89 1.58 23.93 18.26 3.05 11.3 17.43 14.99 5.21 7.93
1.947 0.062 1.036 0.812 0.120 0.445 0.811 0.750 0.338 0.442
12 49.45 1.58 26.32 20.63 3.05 11.3 20.60 19.05 8,59 11.23
2.147 0.062 1.130 0 .906 0.120 0.445 0.936 0.875 0.416 0.539
14 54.54 1.58 28.70 23.10 3.05 11.3 23.78 22.23 10.57 13.69
2.347 0.062 1.223 0.969 0.120 0.445 1.061 1.000 0.550 0.616
16 59.61 1.575 31.07 24.61 3.05 11.3 26.96 25.4 13.97 15.65
2.547 0.062 1.317 1 .062 0.120 0.445 1.186 1.125 0.600 0.672
18 64.70 1.575 33.45 26.58 3.05 11.3 30.12 28.58 15.24 17.07
2.831 0.080 1.442 1.156 0.120 0.555 1.311 1.250 0.635 0.747
20 71.91 2.03 36.63 29.36 3.05 14.10 33.30 31.75 16.13 18.98
3.031 0.080 1.567 1 .250 0.120 0.555 1.436 1.375 0.670 0.846
22 76.99 2.03 39.80 31.75 3.05 14.10 36.47 34.93 17.02 21.49
3.074 0.080 1.692 1.375 0.147 0.590 1.561 1.500 0.740 0.894
24 78.08 2.03 42.98 34.93 3.73 14.99 39.65 38.1 18.80 22.71
10P 62GB-10P
4-hole flange mounting for potting
Shell
Size A
max B
± 0.0 05
(± 0.13)
c
max.sq. D
TP
sq
E
± 0.010
(± 0.254)
F
± 0.005
(± 0.13)
G
dia.
max
Y
dia.
max
Z
dia.
min
1.453 0.062 0.817 0.594 0.120 0.445 0.572 0.473 0.260
08 36.91 1.575 20.75 15.09 3.05 11.3 14.53 12.02 6.60
1.453 0.062 0.942 0.179 0.120 0.445 0.666 0.590 0.463
10 36.91 1.58 23.93 18.26 3.05 11.3 16.92 14.99 11.76
1.453 0.062 1.036 0.812 0.120 0.445 0.822 0.750 0.577
12 36.91 1.58 26.32 20.63 3.05 11.3 20.88 19.05 14.15
1.453 0.062 1.130 0.906 0.120 0.445 0.907 0.875 0.590
14 36.91 1.58 28.70 23.10 3.05 11.3 23.04 22.23 14.99
1.453 0.062 1.223 0.969 0.120 0.445 1.040 1.000 0.713
16 36.91 1.58 31.07 24.61 3.05 11.3 26.42 25.40 18.11
1.453 0.062 1.317 1.062 0.120 0.445 1.165 1.125 0.835
18 36.91 1.58 33.45 26.58 3.05 11.3 29.60 28.58 22.21
1.672 0.080 1.442 1.156 0.120 0.555 1.285 1.250 1.015
20 42.47 2.03 36.63 29.36 3.05 14.10 32.64 31.75 25.78
1.672 0.080 1.567 1.250 0.120 0.555 1.400 1.375 1.015
22 42.47 2.03 39.80 31.75 3.05 14.10 35.56 34.93 25.78
1.734 0.080 0.692 1.375 0.147 0.590 1.540 1.500 1.265
24 44.05 2.03 42.98 34.93 3.74 14.99 39.12 38.10 32.13
10J
4-hole flange mounting with clamp for
unscreened jacketed cable. No grommet
supplied
62GB-10J
18
Box Mounting
Receptacles
12E 62GB-12E
BS9522 - F0017 - C 2097
MIL-C-26482 MS311 2E
Shell
Size A
max 8
± 0.005
(± 0.13)
C
max
sq.
D
TP
sq.
E
± 0 010
(± 0.254)
F
± 0.005
( ± 0.13)
G
dia.
max.
L V
dia.
max.
0.978 0.062 0.817 0.594 0.120 0.445 0.434 0.800 0.473
08 24.84 1.58 20.75 15.09 3.05 11.3 11.02 20.32 12.02
0.978 0.062 0.942 0.719 0.120 0.445 0.558 0.800 0.590
10 24.84 1.58 23.93 18.26 3.05 11.3 14.17 20.32 14.99
0.978 0.062 1.036 0.812 0.120 0.445 0.683 0.800 0.750
12 24.84 1.58 26.32 20.63 3.05 11.3 17.35 20.32 19.05
0.978 0.062 1.130 0.906 0.120 0.445 0.808 0.800 0.875
14 24.84 1.58 28.70 23.10 3.05 11.3 20.52 20.32 22.23
0.978 0.062 1.223 0.969 0.120 0.445 0.933 0.800 1.000
16 24.84 1.58 31.07 24.61 3.05 11.3 23.70 20.32 25.4
0.978 0.062 1.317 1.062 0.120 0.445 1.057 0.800 1.125
18 24.84 1.58 33.45 26.58 3.05 11.3 26.85 20.32 28.58
1.048 0.080 1.442 1.156 0.120 0.555 1.182 0.875 1.250
20 26.62 2.03 36.63 29.36 3.05 14.10 30.02 22.23 31.75
1.048 0.080 1.567 1.250 0.120 0.555 1.307 0.875 1.375
22 26.62 2.03 39.80 31.75 3.05 14.10 33.20 22.23 34.93
1 .048 0.080 1.692 1.375 0.147 0.590 1.432 0.875 1.500
24 26.62 2.03 42.98 34.93 3.74 14.99 36.37 22.23 38.1
BS9522 - F0017 - C2262
K
L
Shell
Size A
max B
± 0.0 05
(±0.13)
C
max
sq.
D
TP
sq.
E
dia
0.010
F
± 0.005
(± 0.13)
G
dia.
Max
J
± 0.0 20
(± 0.51) min max. max min
Y
dia
max.
Z
0.982 0.062 0.817 0.594 0.120 0.445 0.434 0.089 0.030 0.028 0.198 0.166 0.473 0.800
08 24.95 1.58 20.75 15.09 3.05 11.3 11.02 2.26 0.76 0.70 5.03 4.22 12.02 20.32
0.982 0.062 0.942 0.719 0.120 0.445 0.558 0.089 0.030 0.028 0.198 0.166 0.590 0.800
10 24.95 1.58 23.93 18.26 3.05 11.3 14.17 2.26 0.76 0.70 5.03 4.22 14.99 20.32
0.982 0.062 1.036 0.812 0.120 0.445 0.683 0.089 0.030 0.028 0.198 0.166 0.750 0.800
12 24.95 1.58 26.32 20.63 3.05 11.3 17.35 2.26 0.76 0.70 5.03 4.22 19.05 20.32
0.982 0.062 1.130 0.906 0.120 0.445 0.808 0.089 0.030 0.028 0.198 0.166 0.875 0.800
14 24.95 1.58 28.70 23.10 3.05 11.3 20.52 2.26 0.76 0.70 5.03 4.22 22.23 20.32
0.982 0.062 1.223 0.969 0.120 0.445 0.933 0.089 0.030 0.028 0.198 0.166 1.000 0.800
16 24.95 1 .58 31.07 24.61 3.05 11.3 23.70 2.26 0.76 0.70 5.03 4.22 25.4 20.32
0.982 0.062 1.317 1.062 0.120 0.445 1.057 0.089 0.030 0.028 0.198 0.166 1.125 0.800
18 24.95 1.58 33.45 26.58 3.05 11.3 26.85 2.26 0.76 0.70 5.03 4.22 28.58 20.32
1.057 0.080 1.442 1.156 0.120 0.555 1.182 0.076 0.030 0.028 0.185 0.153 1.250 0.875
20 26.85 2.03 36.63 29.36 3.05 14.10 30.02 1.93 0.76 0.70 4.70 3.89 31.75 22.23
1.057 0.080 1.567 1.250 0.120 0.555 1.307 0.076 0.030 0.028 0.185 0.153 1.375 0.875
22 26.85 2.03 39.80 31.75 3.05 14.10 33.20 1.93 0.76 0.70 4.70 3.89 34.93 22.23
1.057 0.080 1.692 1.375 0.147 0.590 1.432 0.076 0.030 0.028 0.185 0.153 1.500 0.875
24 26.85 2.03 42.98 34.93 3.74 14.99 36.37 1.93 0.76 0.70 4.70 3.89 38.1 22 23
62GB-12E
(
219
)
12E
(
219
)
4-hole flange mounting with plain shell
with film wire terminations
19
Box Mounting
Receptacles
Hermetic Seal
12H 62GB-12H
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq.
D E
0.008
(± 0.203)
(±.051) .002
F
± 0.0 05
(± 0.13)
R
±0.005
(±0.13)
S Y
0.828 0.062 0.812 0.594 0.120 0.443 0.568 1.250 0.473
08 21.03 1.57 20.61 15.08 3.05 11.25 14.42 31.73 12.01
0.828 0.062 0.937 0.719 0.120 0.443 0.695 1.359 14.99
10 21.03 1.57 23.79 18.29 3.05 11.25 17.53 34.52 14.99
0.828 0.062 1.031 0.812 0.120 0.443 0.864 1.531 0.750
12 21.03 1.57 26.17 20.57 3.05 11.25 21.84 38.89 19.05
0.828 0.062 1.125 0.906 0.120 0.443 0.989 1.656 0.875
14 21.03 1.57 28.57 23.11 3.05 11.25 25.15 42.06 22.23
0.828 0.062 1.218 0.969 0.120 0.443 1.113 1.781 1.000
16 21.03 1.57 30.93 24.64 3.05 11.25 28.19 45.24 25.40
0.828 0.062 1.312 1.062 0.120 0.443 1.238 1.891 1.125
18 21.03 1.57 33.32 26.92 3.05 11.25 31.49 48.03 28.58
0.890 0.093 1.437 1.156 0.120 0.561 1.363 2.031 1.250
20 22.60 2.36 36.49 29.46 3.05 14.24 34.54 51.59 30.75
0.890 0.093 1.562 1.250 1.120 0.561 1.488 2.156 1.375
22 22.60 2.36 39.67 31.75 3.05 14.24 37.85 54.76 34.93
0 890 0.093 1.687 1.375 0.147 0.593 1.615 2.277 1.500
24 22.60 2.36 42.84 35.05 3.81 15.06 41.15 57.84 38.10
4-hole square mounting with exposed
solder buckets or flattened and pierced
pins.
20
Single Hole Fixing
Receptacles
Table of Styles
62GB-57
A
Page No.
23
62GB-57A (219) 23
62GB-14E 24
62GB-14F 24
62GB-57
T
25
62GB-17P 25
62GB-17H
Hermetic Seal 26
21
Single Hole Fixing
Receptacles
Table of Styles
62GB-13H
Hermetic Seal
62GB-5005-10
62GB-5036-10
62GB-5016-10
62GB-5024
62GB-5052
62GB-5030
Page No.
26
27
27
28
28
29
29
22
Single Hole Fixing
Receptacles
Table of Styles
62GB-5065
62GB-5067
Page No.
30
30
23
Single Hole Fixing
Receptacles
57A 62GB-57A
BS9522 - F0017 - C2099
Single hole mounting with plain shell for
direct wiring to exposed solder buckets.
Has panel 'O' ring seal.
Shell
Size A
max B
± 0.005
(± 0.13)
C
sq, F
± 0.005
(±0.13)
K
min max L M
-0.005
(-0.13)
N R
±.0.005 ± 0.005
(±0.13) (±0.13)
s
min Y X
Thread
0.978 0.117 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473
08 24.84 2.97 23.93 17.93 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF
0.978 0.117 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 24.84 2.97 27.10 17.93 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF
0.978 0.117 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0 885 1 531 0.750
12 24.84 2.97 31.88 17.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF
0.978 0.117 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 24.84 2.97 35.05 17.93 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 -20 UNEF
0.978 0.117 1.505 0.706 0.062 0.125 1 312 1.063 1.076 1.135 1.781 1.000
16 24.84 2.97 38.23 17.93 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF
0.978 0.117 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 24.84 2.97 41.40 17.93 1.58 3.18 36.50 30.18 30.50 32.00 48 03 28.58 1.1/4 - 18 NEF
1.048 0.148 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250
20 26.62 3.76 46.15 22.71 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 - 18NEF
1.048 0.148 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375
22 26.62 3.76 49.33 22.71 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 NEF
1.048 0.148 2.067 0.927 0.062 0.250 1 .812 1 .563 1.576 1 635 2 277 1.500
24 26.62 3.76 52.50 23.55 1.575 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF
57A
(
219
)
62GB-57A (219)
BS9522 - F0017- C2261
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
m B
±0.005
(± 0.13)
C
sq.
max.
max D
min F
±0.005
(±0.13)
H
max min K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S
min Y X
Thread
0.976 0.117 0.942 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473
08 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 -24 NEF
0.976 0.117 1.067 0.030 0.028 0.706 0.173 0.133 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 24.79 2.97 23.93 0.76 0.71 17.93 4.40 3.38 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF
0.976 0.117 1.255 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 24.79 2.97 31.88 0.76 0.71 17.93 4.40 3.38 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF
0.976 0.117 1.380 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 24.79 2.97 35.05 0.76 0.71 17.93 4.40 3.38 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.26 1 - 20 UNEF
0.976 0.117 1.505 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 24.79 2.97 38.23 0.76 0.71 17.93 4.40 3.38 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF
0.976 0.117 1.630 0.030 0.028 0.706 0.173 0.133 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 24.79 2.97 41.40 0.76 0.71 17.93 4.40 3.38 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 NEF
1 .195 0.148 1 817 0.030 0.028 0.894 0.173 0.133 0.062 0.250 1 562 1 .313 1 .326 1 .385 2.031 1 .250
20 30.35 3.76 46.15 0.76 0.71 22.71 4.40 3.38 1.58 6.35 38.68 33.35 35.18 51 59 31.75 1 .3/8 - 18 NEF
1.195 0.148 1.942 0.030 0.028 0.894 0.173 0.133 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375
22 30.35 3.76 49.33 0.76 0.71 22.71 4.40 3.38 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18NEF
1.228 0.148 2.067 0.030 0.028 0.927 0.173 0.133 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500
24 30.35 3.76 52.50 0.76 0.71 23.55 4.40 3.38 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF
24
Single Hole Fixing
Receptacles
14E 62GB-14E
MIL-C-26482 MS3114E
BS9522 - F0017
- C2098
Single hole mounting with grommet
and grommet nut.
Has panel 'O' ring seal
Shell
Size A
max B
±0.005
(±0.13)
C
max
sq.
F
±0.005
(±0.13)
G
Dia
Max
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) ( ±0.13) (±0.13)
S Y X
Thread
1.344 0.117 0.942 0.706 0 713 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473
08 34.14 2.97 23.93 17.93 18.11 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16-24NEF
1.344 0.117 1.067 0.706 0.838 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 34.14 2.97 27.10 17.93 21.29 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 -24 NEF
1.344 0.117 1.255 0.706 0.963 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 34.14 2.97 31 .88 17.93 24.46 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 -20 UNEF
1 .344 0.117 1.380 0.706 1.088 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 34.14 2.97 35.05 17.93 27.63 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF
1.344 0.117 1.505 0.706 1.213 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 34.14 2.97 38.23 17.93 30.81 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 -18NEF
1.344 0.117 1.630 0.706 1.338 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 34.14 2.97 41.40 17.93 33.98 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 –18 NEF
1.576 0.148 1 817 0.894 1.463 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250
20 40.03 3.76 46.15 22.71 37.16 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
1.3/8 - 18 NEF
1.576 0.148 1.942 0.894 1 .588 0 .062 0.250 1.687 1.438 1.451 1.510 2.156 1.375
22 40.03 3.76 49.33 22.71 40.33 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1 /2 - 18 NEF
1.609 0.148 2.067 0.927 1.713 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500
24 40.87 3.76 52.50 23.55 43.51 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF
14F 62GB-1 4F
MIL-C-26482 MS3 114F
Single hole mounting with grommet and
grommet nut fitted with integral strain
relief clamp.
Has panel 'O' ring seal
Shell
Size A
max B
±0.005
(±0.13)
C
max
sq.
F
±0.005
(±0.13)
G
dia.
max.
H
0.005
(± 0.13)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
1.762 0.117 0.942 0.706 0.828 0.156 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473
08 44.75 2.97 23.93 17.93 21.03 3.96 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 -24 NEF
1.762 0.117 1.067 0.706 0.891 0.188 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 44.75 2.97 27.10 17.93 22.63 4.78 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 124 NEF
1.762 0.117 1.255 0.706 1.016 0.312 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 44 75 2.97 31.88 17.93 25.81 7.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 20 UNEF
1 .736 0.117 1.380 0.706 7.147 0.375 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 44.10 2.97 35.05 17.93 28.97 9.53 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 NEF
1.876 0.117 1.505 0.706 1.203 0.500 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 47.65 2.97 38.23 17.93 30.56 12.7 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 1.1/8 - 18 NEF
1.876 0.117 1.630 0.706 1.426 0.625 0.062 0.125 1.437 1.188 1.201 1.260 1.891 7.125
18 47.65 2.97 41.40 17.93 36.22 15.88 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1/4 - 18 NEF
2.118 0.148 1.817 0.894 1.426 0.625 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250
20 53.8 3. 76 46.15 22.71 36.22 15.88 1.58 6.35 38 68 33.35 33.68 35.18 51 .59 31.75 1.3/8 - 18 NEF
2.118 0.148 1.942 0.894 7.567 0.750 0.062 0.250 1.687 1.438 1.451 1.510 2.756 1.375
22 53.8 3.76 49.33 22.71 39.80 19.05 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 NEE
2.250 0.148 2.067 0.927 1.735 0.800 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500
24 57.15 3.76 52.50 23.55 44.07 20.32 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF
25
Single Hole Fixing
Receptacles
57T 62G B-57T
BS9522 - F0017 - C2100
Single hole mounting with threaded
shell to accept accessories
Shell
Size A
max B
± 0.005
(± 0.13)
c
max.
sq.
F
± 0.005
(±0.13)
G
dia,
max.
K
min max L M
-0.005
(- 0.13)
N Y X
Thread
0.978 0.117 0.942 0.595 0.426 0.062 0.125 0.750 0.527 0.473
08 24.84 2.97 23.93 15.12 10.82 1.58 3.18 19.05 13.3 7/16 - UNEF 12.03 9/16 - 24 NEF
0.978 0.117 1.067 0.595 0.552 0.062 0.125 0.875 0.652 0.590
10 24.84 2.97 27.10 15.12 14.02 1.58 3.18 22.23 16.56 9/16 – UNEF 14.99 11/16 – 24 NEF
0.978 0.117 1.255 0.595 0.677 0.062 0.125 1.062 0.815 0.750
12 24.84 2.97 31 .88 15.12 17.20 1.58 3.18 26.98 20.70
11/16 – UNEF 19.05 7/8 – 20 UNEF
0.978 0.117 1.380 0.595 0.802 0.062 0.125 1.187 0.939 0.875
14 24.84 2.97 35.05 15.12 20.37 1.58 3.18 30.15 23.85 13/16 - UNEF 22.23 1 – 20 UNEF
0.978 0.117 1.505 0.595 0.927 0.062 0.125 1.312 1.063 1.000
16 24.84 2.97 38.23 15.12 23.55 1.58 3.18 33.32 27.00 15/16 – UNEF 25.40 1.1/18 – 18 NEF
0.978 0.117 1.630 0.595 1.052 0.062 0.125 1.437 1.188 1.125
18 24.84 2.98 41.40 15.12 26.72 1.58 3.18 36.50 30.18 1.1/16 – UNEF 28.58 1.1/4 – 18 NEF
1.048 0.148 1.817 0.720 1.167 0.062 0.250 1.562 1.313 1.250
20 26.62 3.76 46.15 18.29 29.65 1 58 6.35 38.68 33.35 1.3/16 – UNEF 31.75 1.3/8 - 18 NEF
1.048 0.148 1.942 0.720 1.292 0.062 0.250 1.687 1.438 1.375
22 26,62 3.76 49.33 18.29 32.82 1.58 6.35 42.85 36.53 1.5/16 – UNEF 34.93 1.1/2 – 18 NEF
1.048 0.148 2.067 0.753 1.416 0.062 0.250 1.812 1.563 1.50
24 26.62 3.76 52.50 19.13 35.97 1.58 6.35 46.05 39.70 1.7/16 - UNEF 38.10 1.5/8 - 18 NEF
17P 62GB-17P
MIL-C-26482 MS31 14P
Single hole mounting for potting. Supplied
complete with potting mould locating ring
and panel 'O' ring seal
Shell
Size A
max. B
±0.005
(±0.13)
C
max.
sq.
F
± 0.005
(±0.13)
G K
min max. L M
-0.005
(-0.13)
N
±0.005
(±0.13)
R
±0.005
(±0.13)
Y Z X
Thread
1.391 0.117 0.942 0.706 0.572 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473 0.260
08 35.33 2.97 23.93 17.93 14.53 1.58 3.175 19.05 13.3 13.72 14.53 31.75 12.03 6.60 9/16 -24 NEF
1.391 0.117 1.067 0.706 0.666 0.062 0.125 0.875 0 .652 0.665 0.697 1 .359 0.590 0.463
10 35.33 2.97 27.10 17.93 16.92 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11.76 11/16 -24 NEF
1.391 0.117 1.255 0.706 0.822 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750 0.557
12 35.33 2.97 31.88 17.93 20.88 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 14.15 7/8 - 20 UNEF
1.391 0.117 1.380 0.706 0.907 0.062 0.125 1.187 0 .939 0.952 1.010 1 .656 0.875 0.590
14 35.33 2.97 35.05 17.93 23.06 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 14.99 1 - 20 UNE F
1.391 0.117 1.505 0.706 1.040 0.062 0.125 1.312 1 063 1 .076 1.135 1.781 1.000 0.713
16 35.33 2.97 38.23 17.93 26.42 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40 18.11 1.1/18 – 18 NEF
1.391 0.117 1.630 0.706 1.165 0.062 0.125 1.437 1 .188 1.201 1.260 1 .891 1.125 0.835
18 35.33 2.97 41.40 17.93 29.59 1.58 3.175 36.50 30.18 30.50 32.00 48.03 28.58 21.21 1.1/4 - 18 NEF
1.641 0.148 1.817 0.894 1.285 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.015
20 41.68 3.76 46.15 22.71 32.64 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 25.78 1.3/8 –18 NEF
1.641 0.148 1.942 0.894 1.400 0.062 0.250 1.687 1 .438 1.451 1.510 2 .156 1.375 1.015
22 41.68 3.76 49.33 22.71 35.56 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 25.78 1.1/2 –18 NEF
1.674 0.148 2.067 0.927 1 .540 0.062 0.250 1.812 1 .563 1.576 1.635 2.277 1.500 1.265
24 42.52 3.76 52.50 23.55 39.12 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 32.13 1.5/8 - 18 NEF
26
Single Hole Fixing
Receptacles
Hermetic Seal
17H 62GB-17H
MIL-C-26482 MS3114H
Single hole mounting with pin contacts in one piece
glass-to-metal seal. Exposed solder buckets or
flattened and pierced pins.
Has panel 'O' ring seal
Shell
Size A
max. B
±0.005
(±0.13)
C
max.
sq
F
±0.005
(±0.13)
min K
max L M
-0.005
(-0.13)
N R
±0.005 ±0.005
(±0.13) (±0.13)
S Y X
Thread
0.828 0.094 0.942 0.706 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473
08 21.03 2.39 23.93 17.93 1.57 3.18 19.05 13.39 13.72 14.53 31.75 12.01 9/16 - 24 NE F
0.828 0.094 1.067 0.706 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 21.03 2.39 27.10 17.93 1.57 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 – 24 NEF
0.828 0.094 1.255 0.706 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 21.03 2.39 31.88 17.93 1.57 3.18 26.97 20.70 21.03 22.48 38.89 19.05 7/8 – 20 UNEF
0.828 0.094 1.380 0.706 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 21.03 2.39 35.05 17.93 1.57 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF
0.828 0.094 1.505 0.706 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 21.03 2.39 38.23 17.93 1.57 3.18 33.32 27.00 27.33 28.53 45.24 25.40 1.1/8 – 18 NEF
0.828 0.094 1.630 0.706 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 21.03 2.39 41.40 17.93 1.57 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1/4 – 18 NEF
0.828 0.125 1.817 0.894 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250
20 21.03 3.18 46.15 22.71 1.57 6.35 39.67 33.35 33.68 35.18 51.59 30.75 1.3/8 – 18 NEF
0.890 0.125 1.942 0.894 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375
22 22.61 3.18 49.33 22.71 1.57 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 – 18 NEF
0.890 0.125 2.067 0.927 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500
24 22.61 3.18 52.50 23.55 1.57 6.35 46.02 39.70 40.03 41.53 57.84 38.10 1.5/8 – 18 NEF
13H 62GB-1 3H
MIL-C-26482 MS3113H
Solder mounting with plain shell and exposed
solder buckets or flattened and pierced pins
Shell
Size A
max B
±0.005
(± 0.13)
c
max F
±0.005
( ± 0.13)
G
max J
max R
±0.005
( ± 0.13)
S
min Y
dia.
max
0.828 0.036 0.630 0.426 0.562 0.592 0.578 1.250 0.473
08 21.03 0.91 16.00 10.82 14.27 15.04 14.68 31.75 12.01
0.828 0.036 0.755 0.426 0.672 0.592 0.687 1.359 0.590
10 21.03 0.91 19.18 10.82 17.07 15.04 17.45 34.52 14.99
0.828 0.036 0.849 0.426 0.781 0.592 0.797 1.531 0.750
12 21.03 0.91 21.56 10.82 19.84 15.04 20.24 38.89 19.05
0.828 0.036 0.974 0.426 0.906 0.592 0.922 1.656 0.875
14 21.03 0.91 24.74 10.82 23.01 15.04 23.42 42.06 22.23
0.828 0.036 1.099 0.426 1.031 0.592 1.047 1.781 1.000
16 21.03 0.91 27.91 10.82 26.19 15.04 26.59 45.24 25.40
0.828 0.036 1.223 0.426 1.156 0.592 1.172 1.891 1.125
18 21.03 0.91 31.06 10.82 29.36 15.04 29.77 48.03 28.58
0.890 0.036 1.317 0.488 1.250 0.658 1.266 2.031 1.250
20 22.61 0.91 33.45 12.40 31.75 16.70 32.16 51.59 30.75
0.890 0.036 1.443 0.488 1.375 0.686 1.390 2.156 1.375
22 22.61 0.91 36.65 12.40 34.93 17.42 35.31 54.76 34.93
0.890 0.036 1.567 0.521 1.500 0.719 1.516 2.277 1.500
24 22.61 0.91 39.80 13.23 38.10 18.26 38.51 57.84 38.10
27
Single Hole Fixing
Receptacles
5005 62GB-5005-10
(RSRE SD/C 235025/X)
Single hole mounting plain shell with PC pin
terminated contacts. Reduced diameter
flange with panel 'O' seal
Size 10 only
A
max B
+0.001
-0.002
(+0.03)
(-0.03)
D
dia.
max
F
+0.002
-0.003
(+0.05)
(-0.08)
K
min max M
-0.005
(-0.13)
N
±0.003
(±0.08)
R
+0.005
(+0.13)
S Y
dia.
max.
X
Thread L
dia
10 0.877 0.065 0.880 0.681 0.062 0.125 0.655 0.659 0.690 1.017 0.590 11/16 – 24 NEF 0.820
22.28 1.65 22.35 17.29 1.58 3.18 16.64 16.74 17.52 25.83 14.99 20.83
5036 62GB-5036-10
(RSRE SD/C235025/X)
Single hole mounting with circular flange
and P.C. terminations
Size 10 onl
y
Shell
Size A
max B
+0.001
-0.002
(+0.03)
(-0.05)
D
dia.
max
F
+0.002
-0.003
(+0.05)
(-0.08)
Y
dia.
max.
K
min max M
-0.005
(-0.13)
N
±0.003
(±0.08)
R
+0.005
(+0.13)
S X
Thread L
dia
10 0.829 0.066 0.880 0.679 0.590 0.062 0.125 0.655 0.659 0.690 1.017 11/16 – 24 NEF 0.820
21.06 1.67 22.35 17.25 14.99 1.57 3.18 16.63 16.47 17.52 25.83 20.83
28
Single Hole Fixing
Receptacles
5016 62GB-5016-10
(RSR E SD/C 23 5025/X)
Single hole mounting plain shell for direct wiring
to exposed solder buckets. Reduced diameter
flange with panel 'O' ring seal
Solder bucket: Size 10 only
Shell
Size A
max B
+0.002
-0.001
(+0.05)
(-0.03)
D
dia.
max
F
+ 0.003
- 0.002
(+ 0.08)
(- 0.05)
K
min max M
- 0.010
(- 0.25)
N
± 0.005
(± 0.13)
R
+ 0.005
(+ 0.13)
S Y
dia.
max.
X
Thread
10 0.902 0.06 4 0.880 0.678 0.062 0.125 0.655 0.665 0.697 1.359 0.590 11/16 – 24 NEF
22.91 1.62 22.35 17.21 1.58 3.18 16.63 16.89 17.70 34.52 14.99
5024 62GB-5024
(RSRE SD/C 35077/X)
Single hole mounting plain shell for direct wiring
to exposed solder buckets. Reduced diameter
flange with panel 'O' ring seal
Solder buckets: Size 8, 12 and 14 only
Shell
Size A
max B
± 0.0 05
( ± 0.13)
D
dia.
max
F
± 0.005
( ± 0.13)
K
min max M
- 0.005
(- 0.13)
N R
± 0.005 ±0.005
(± 0.13) (± 0.13)
S
min Y
dia.
max
X
Thread
0.978 0.117 0.830 0.706 0.062 0.125 0.527 0.540 0.572 1.250 0.473
08 24.84 2.97 21.08 17.93 1.58 3.18 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF
0.978 0.117 1.130 0.706 0.062 0.125 0.815 0.828 0.885 1.531 0.750
12 24.84 2.97 28.70 17.93 1.58 3.18 20.70 21.03 22.48 38.89 19.05 7/8 - 20 UNEF
0.978 0.117 1.260 0.706 0.062 0.125 0.939 0.952 1.010 1.656 0.875
14 24.84 2.97 32.00 17.93 1.58 3.18 23.85 24.18 25.65 42.06 22.23 1 -20 UNEF
29
Single Hole Fixing
Receptacles
5052 62GB-5052-10
Single hole fixing with circular flange and back
end thread - solder termination
Size 10 only
Shell
Size A
max B
(± 0.05)
(± 0.03)
C
max.
sq.
F
+ 0.003
- 0.002
(+ 0.08)
(- 0.05)
K
min max L M
- 0.005
(- 0.13)
N
± 0.005
(± 0.13)
R
± 0.005
(± 0.13)
S
± 0.005
(± 0.13)
X
Thread
10 0.947 0.062 0.880 0.677 0.062 0.125 0.820 0.650 5/8 – 24 UNEF 0.697 1.359 5/8 – 24 NEF
24.06 1.58 22.35 17.19 1.58 3.18 20.83 16.51 17. 70 34.52
5030 62GB-5030
Bulkhead mounting receptacle with solder
terminations
Shell
Size A
max B
± 0.0 05
(± 0.13)
C
± 0.0 10
(± 0.25)
F
± 0.0 05
(± 0.13)
L N
Thread
0.978 0.094 0.812 0.415 0.563
08 24.85 2.39 20.63 10.54 14.30
7/16 - 28 U N E F
0.978 0.094 0.937 0.415 0.680
10 24.85 2.39 23.80 10.54 17.28 9/16 - 24 NEF
0.978 0.094 1.031 0.415 0.859
12 24.85 2.39 26.19 10.54 21.82
11 /16 - 24 NEF
0.978 0.094 1.125 0.415 0.984
14 24.85 2.39 28.58 10.54 25.00 13/16 - 20 UNEF
0.978 0.094 1.218 0.415 1.108
16 24.85 2.39 30.94 10.54 28.15
15/16 - 20 UNEF
0.978 0.094 1.3121 0.415 1.233
18 24.85 2.39 33.33 10.54 31.32 1.1/16 - 18NEF
1.048 0.102 1.437 0.535 1.358
20 26.62 2.59 36.50 13.59 34.50
1.3/16 -18NEF
1.048 0.102 1.562 0.535 1.483
22 26.62 2.59 39.68 13.59 37.67 1.5/16 - 18 NEF
1.048 0.102 1.687 0.572 1.610
24 26.62 2.59 42.85 14.53 40.90
1.7/16 - 18 NEF
30
Single Hole Fixing
Receptacles
5065 62G B-5065
BS9522-F0017 C2261
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
max B
± 0.005
(± 0.13)
C
sq. D
max min F
± 0.005
(± 0.13)
H
max min J
± 0.020
(± 0.51)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
1.021 0.117 0.942 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.750 0.527 0.540 0.572 1 250 0.473
08 25.94 2.97 23.93 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF
1.021 0.117 1.067 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 25.94 2.97 27.10 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 NEF
1.021 0.117 1.255 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 25.94 2.97 31.88 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05 7/8 - 20 UNEF
1.021 0.117 1.380 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 25.94 2.97 35.05 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF
1.021 0.117 1.505 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 25.94 2.97 38.23 0.76 0.71 17.93 5.54 4.52 1 .52 1.58 3.18 33.32 27.00 27.33 28.83 45 24 25.40 1.1/8 - 18 NEF
1.021 0.117 1.630 0.030 0.028 0.706 0.218 0.178 0.060 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 25.94 2.97 41.40 0.76 0.71 17.93 5.54 4.52 1.52 1.58 3.18 36.50 30.18 30.50 32.00 48.03 28.58 1.1 /4 - 18 NEF
1.240 0.148 1.817 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250
20 31.50 3.76 46.15 0.76 0.71 22.71 5.54 4.52 1.52 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
1.3/8 - 18 NEF
1.240 0.148 1942 0.030 0.028 0.894 0.218 0.178 0.060 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375
22 31 .50 3.76 49.33 0.76 0.71 22.71 5.54 4.52 1 .52 1.58 6.35 42.85 36.53 36.855 38.35 54.76 34.93 1.1/2 - 18 NEF
1.273 0.148 2.067 0.030 0.028 0.927 0.218 0.178 0.060 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1 .500
24 32.34 3.76 52.50 0.76 0.71 23.55 5.54 4.52 1.52 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10 1.5/8 - 18 NEF
5067 62GB-5067
BS9522 - F0017- C2261
Single hole mounting with plain shell
and film wire terminations
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
D
max min F
± 0.005
(± 0.13)
H
max min J
± 0.012
(± 0.30)
K
min max L M N R
-0.005 ±0.005 ±0.005
(-0.13) (±0.13) (±0.13)
S Y X
Thread
1.095 0.117 0.942 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.750 0.527 0.540 0.572 1.250 0.473
08 27.81 2.97 23.93 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 19.05 13.3 13.72 14.53 31.75 12.03 9/16 - 24 NEF
1.095 0.117 1.067 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590
10 27.81 2.97 27.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99 11/16 - 24 NEF
1.095 0.117 1.255 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 27.81 2.97 31.88 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 26.98 20.70 21.03 22.50 38.89 19.05 7/8 - 20 UNEF
1.095 0.117 1.380 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
14 27.81 2.97 35.10 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23 1 - 20 UNEF
1.095 0.117 1.505 0.030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
16 27.81 2.97 38.23 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 33.23 27.00 27.33 28.83 45.24 25.40 1.1/8 -18 NEF
1.095 0.117 1.630 0 .030 0.028 0.706 0.262 0.230 0.049 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125
18 27.81 2.97 41.40 0.76 0.71 17.93 6.66 5.85 1.24 1.58 3.18 36.50 30.18 30.51 32.00 48.03 28.58 1.1 /4 - 18 NEF
1.309 0.148 1.817 0.030 0.028 0.894 0.262 0.230 0.049 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1 .250
20 33.24 3.76 46.15 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75 1.3/8 -18 NEF
1.309 0.148 1.942 0 .030 0.028 0.894 0.262 0.230 0.049 0.062 0250 1.687 1.438 1.451 1.510 2.156 1.375
22 33.24 3.76 49.33 0.76 0.71 22.71 6.66 5.85 1.24 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93 1.1/2 -18 NEF
1.342 0.148 2.067 0.030 0.028 0.927 0.262 0.230 0.049 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500
24 34.08 3.76 52.50 0.76 0.71 23.55 6.66 5.85 1.24 1.58 6.35 46.03 39.07 40.03 41.59 57.84 38.10 1.5/8 -18 NEF
31
Cable Mounting
Receptacles
Table of Styles
62GB-51
T
62GB-11
A
62GB-11E
62GB-11F
62GB-11J
62GB-11P
Page No.
32
32
33
33
34
34
32
Cable Mounting
Receptacles
51T 62GB-51T
BS9522-F0017-C2101
Basic cable mounting receptacle with
threaded shell to accept standard cable
accessories.
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
Y
dia
max
X
Thread
0.978 0.094 0.817 0.415 0.473
08 24.84 2.39 20.75 10.54 12.03 7/16 - 28 UNEF
0.978 0.094 0.942 0.415 0.590
10 24.84 2.39 23.93 10.54 14.99 9/16 - 24 NEF
0.978 0.094 1.036 0.415 0.750
12 24.84 2.39 26.32 10.54 19.05
11 /16 - 24 NEF
0.978 0.094 1.130 0.415 0.875
14 24.84 2.39 28.70 10.54 22.23 13/16 - 20 UNEF
0.978 0 094 1.223 0.415 1.000
16 24.84 2.39 31.07 10.54 25.40
15/16 - 20 UNEF
0.978 0.094 1.317 0.415 1.125
18 24.84 2.39 33.45 10.54 28.58 1.1/16 -18 NEF
1.048 0.102 1.442 0.535 1.250
20 26 62 2.59 36.63 13.59 31.75 1 .3/16 -18 NEF
1.048 0.102 1.567 0.535 1.375
22 26.62 2.59 39.80 13.59 34.93 1.5/16 -18 NEF
1.048 0.102 1.692 0.560 / 0.574 1.500
24 26.62 2.59 42.98 14.23 / 14.58 38.10
1.7/16 -18 NEF
11A 62GB-11A
Cable mounting receptacle with general
duty back shell. No grommet supplied.
Shell
Size A
max B
± 0 005
(± 0.13)
C
max
sq
F
± 0.0 05
(± 0.13)
G
dia
max
Y
Dia
max
M
Thread
1.624 0.094 0.817 0.415 0.561 0.473
08 41.25 2.39 20.75 10.54 14.25 12.03
1/2 - 28 UNEF
1 .624 0.094 0.942 0.415 0.686 0.590
10 41.25 2.39 23.93 10.54 17.43 14.99 5/8 - 24 NEF
1.624 0.094 1.036 0.415 0.811 0.750
12 41.25 2.39 26.32 10.54 20.60 19.05
3/4 - 20 UNEF
1.624 0.094 1.130 0 .415 0.936 0.875
14 41.25 2.39 28.70 10.54 23.78 22.23 7/8 - 20 UNEF
1.624 0.094 1.223 0.415 1.061 1.000
16 41.25 2.39 31.07 10 54 26.95 25.40
1 – 20 UNEF
1.624 0.094 1.317 0 .415 1.186 1.125
18 41.25 2.39 33.45 10.54 30.13 28.58 1.3/16 – 18 NEF
1.687 0 104 / 0.100 1.442 0.535 1.311 1.250
20 42.85 2.64 / 2.55 36.63 13.59 33.30 31.75
1 3/16 -18 NEF
1.687 0.104 / 0.100 1.567 0.535 1.436 1.375
22 42.85 2.64 / 2.55 39.80 13.59 36.75 34.93 1.7/16 -18 NEF
1.730 0.104 / 0.100 1.692 0.569 / 0.574 1.561 1.500
24 43.94 2.64 / 2.55 42.98 14.45 / 14.58 39.65 38.10 1.7/16 -18 NEF
33
Cable Mounting
Rece
p
tacles
11E 62GB-11E
MIL-C-26482 MS3111E
Cable mounting receptacle with grommet
and grommet nut
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.0 05
(± 0.13)
G
dia
max
Y
dia
max
1.281 0.094 0.817 0.415 0.561 0.473
08 32.54 2.39 20.75 10.54 14.25 12.03
1.281 0.094 0.942 0.415 0.686 0.590
10 32.54 2.39 23.93 10.54 17.43 14.99
1.281 0.094 1.036 0.415 0.811 0.750
12 32.54 2.39 26.32 10.54 20.60 19.05
1.281 0.094 1.130 0.415 0.936 0.875
14 32.54 2.39 28.70 10.54 23.78 22.23
1.281 0.094 1.223 0.415 1.061 1.000
16 32.54 2.39 31.07 10.54 26.95 25.40
1.281 0.094 1.317 0.415 1.186 1.125
18 32.54 2.39 33.45 10.54 3013 28.58
1.383 0.102 1.442 0.535 1.311 1.250
20 35.13 2.59 36.63 13.59 33.30 31.75
1.383 0.102 1.567 0.535 1.436 1.375
22 35.13 2.59 39.80 13.59 36.75 34.93
1.383 0.102 1.692 0.569 / 0.574 1.561 1.500
24 35.13 2.59 42.98 14.45 / 14.58 39.65 38.10
62GB
-
11F
MIL-C-26482 MS 3 111F
Cable mounting receptacle with
grommet and grommet nut fitted with
inte
g
ral strain relief clam
p
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.005
(± 013)
G
dia
max
H
± 0.005
(± 0.13)
Y
dia
max
08 1.762 0.094 0.817 0.415 0.828 0.156 0.473
44.75 2.39 20.75 10.54 21.03 3.96 12.03
10 1.762 0.094 0.942 0 415 0.891 0.188 0 .590
44.75 2.39 23.93 10.54 22.63 4 .78 14.99
12 1.762 0.094 1.036 0.415 1.016 0.312 0.750
44.75 2.39 26.32 10.54 25.81 7.93 19.05
14 1.736 0.094 1.130 0.415 1.141 0.375 0.875
44.10 2.39 28.70 10.54 28.97 9 .53 22.23
16 1.876 0.094 1.223 0.415 1.203 0.500 1.000
47.65 2.39 31.07 10.54 30.56 12.7 25.40
18 1.876 0.094 1.317 0.415 1.426 0.625 1.125
47.65 2.39 33.45 10.54 36.22 15.88 28.58
20 2.118 0.104 / 0.100 1.442 0.535 1 .426 0.625 1.250
53.80 2.64 / 2.55 36.63 13.59 36.22 15.88 31.75
22 2.118 0.104 / 0.100 1.567 0.535 1.567 0.750 1.375
53.80 2.64 / 2.55 39.80 13.59 39.80 19.05 34.93
24 2.250 0.104 / 0.100 1.692 0.569 / 0.574 1.735 0.800 1.500
57.15 2.64 / 2.55 42.98 14.45 / 14.58 44.07 20.32 38.10
11F
34
Cable Mounting
Receptacles
11J
62GB
-
11J
With cable clamp for unscreened
jacketed cable. No grommet supplied
Shell
Size A
max B
± 0.005
(± 0.13)
C
max
sq
F
± 0.0 05
(± 0.13)
G
dia
max
Y
dia
max
min
closed Z
max
free
1.846 0.094 0.817 0.415 0.561 0.473 0.168 0.230
08 46.89 2.39 20.75 10.54 14.25 12.03 4.28 5.84
1.846 0.094 0.942 0.415 0.686 0.590 0 .205 0.312
10 46.89 2.39 23.93 10.54 17.43 14.99 5.21 7.93
1.947 0.094 1.036 0.415 0.811 0.750 0.338 0.442
12 49.45 2.39 26.32 10.54 20.60 19.05 8.59 11.23
2.147 0.094 1.130 0.415 0.936 0.875 0 .416 0.539
14 54.54 2.39 28.70 10.54 23.78 22.23 10.57 13.69
2.347 0.094 1.223 0.415 1.061 1.000 0.550 0.616
16 59.61 2.39 31.07 10.54 26.95 25.40 13.97 15.65
2.547 0.094 1.317 0.415 1.186 1.125 0 .600 0.672
18 64.70 2.39 33.45 10.54 30.13 28.58 15.24 17.07
2.831 0.102 1.442 0.535 1.311 1.250 0.635 0.747
20 71.91 2.59 36.63 13.59 33.30 31.75 16.13 18.98
3.031 0.102 1.567 0.535 1.436 1.375 0 .670 0.846
22 76.99 2.59 39.80 13.59 36.75 34.93 17.02 21.49
3.074 0.102 1.692 0.569 / 0.574 1.561 1.500 0.740 0.894
24 78.03 2.59 42.98 14.45 / 14.58 39.65 38.10 18.80 22.71
11P
62GB
-
11P
MIL-C-26482 MS3111P
For potted seal supplied complete with
detachable potting mould and location ring
Shell
Size A
max 8
± 0.0 05
(± 0.13)
C
max
sq
F
± 0.005
(± 0.13)
G
dia
max
Y
dia
max
Z
min
1.316 0.094 0.817 0.415 0.572 0.473 0.260
08 33.43 2.39 20.75 10.54 14.53 12.03 6.60
1.425 0.094 0.942 0.415 0.666 0.590 0.463
10 36.20 2.39 23.93 10.54 16.92 14.99 11.76
1.394 0.094 1.036 0.415 0.822 0.750 0.557
12 35.41 2.39 26.32 10.54 20.88 19.05 14.15
1.394 0.094 1.130 0.415 0.907 0.875 0.590
14 35.41 2.39 28.70 10.54 23.04 22.23 14.99
1.394 0.094 1.223 0.415 1.040 1.000 0.713
16 35.41 2.39 31.07 10.54 26.42 25.40 18.11
1.394 0.094 1.317 0.415 1.165 1.125 0.835
18 35.41 2.39 33.45 10.54 29.59 28.58 22.21
1.612 0.102 1.442 0.535 1.285 1.250 1.015
20 40.95 2.59 36.63 13.59 32.64 31.75 25.78
1.612 0.102 1.567 0.535 1.400 1.375 1.015
22 40.95 2.59 39.80 13.59 35.56 34.93 25.78
1.674 0.102 1.692 0.569 / 0.574 1.540 1.500 1.265
24 42.52 2.59 42.98 14.45 / 14.58 39.12 38.10 32.13
35
I
nser
t
O
r
i
en
t
a
ti
ons
For M I L-C-26482 and for
replacement purposes in
BS9522 FOO 17
Normal position
with pin contacts Alternative position of insert
with socket contacts
(∅ counterclockwise)
Each diagram shows mating face of insert.
Alternate position of insert
with pin contacts
(
∅
clockwise)
Orientation ∅ (degrees)
Insert
Arrangement Normal W X Y Z
8-2 0 58 122 - -
8-3 0 60 210 - -
8-33 0 90 - - -
8-4 0 45 - - -
8-98 0 - - - -
10-2 0 - - - -
10-6 0 90 - - -
10-7 0 - - - -
12-3 0 - - 180 -
12-10 0 60 155 270 295
14-5 0 40 92 184 273
14-12 0 43 90 - -
14-15 0 17 110 155 234
14-19 0 30 165 315 -
16-18 0 54 152 180 331
16-23 0 158 270 - -
16-26 0 60 - 275 338
18-11 0 62 119 241 340
18-32 0 85 138 222 265
20-16 0 238 318 333 347
20-41 0 45 126 225 -
22-21 0 16 135 175 349
22-55 0 30 142 226 314
24-61 0 90 180 270 324
36
Key/Keyway
Orientations
For BS9522 F0017
Datum is always taken from major key or keyway. In
receptacles the m ajor keyw ay always remains fixed
in relat ion to the mounting flange. For the
A',B,C,D',E and F orientations, the three bayonet
location s and as soci a t ed min o r ke ywa ys are rotated
complete, in accordance with the table below.
N.B.-
The accompa n yin g di a gr a m sh ow s a r e c ep t a cl e
shell, with keyways. Corresponding key orientations
for a mating plug shell are therefore always
clockwise.
Shell
Size Values for ∝
(degrees) Values for θ
(degrees) Values for β
(degrees)
N A* B C D* E F N A* B C D* E F N A* B C D* E F
8 105 92 - - 118 118 82 35 35 - - 35 30 50 75 75' - - 75 100 75
10 105 95 85 125 115 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75
12 105 97 89 121 113 115 85 35 35 35 35 35 30 50 75 75 75 75 75 100 75
14 105 98 91 119 112 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
16 105 99 93 117 111 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
18 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
20 105 100 95 115 110 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
22 105 101 97 113 109 7S 120 35 35 35 35 35 30 50 75 75 75 100 75 75 75
24 105 101 97 113 109 75 120 35 35 35 35 35 30 50 75 75 75 75 75 100 75
Shell
Size Values for ϕ (degrees)
Orientation Values for ω (degrees)
Orientation
N A* B C D* E F N A* B C D* E F
8 50 50 50 50 50 30 45 60 47 - - 73 73 47
10 50 50 50 50 50 30 45 60 50 40 80 70 70 50
12 50 50 50 50 50 30 45 60 52 44 76 68 70 50
14 50 50 50 50 50 30 35 60 53 46 74 67 30 75
16 50 50 50 50 50 30 35 60 54 48 72 66 30 75
18 50 50 50 50 50 30 35 60 55 50 70 65 30 75
20 50 50 50 50 50 30 35 60 55 50 70 65 30 75
22 50 50 50 50 50 30 35 60 56 52 68 64 30 75
24 50 50 50 50 50 30 35 60 56 52 68 64 30 75
* now inactive for new
designs but available for
replacement purposes.
Supersede d in BS95 22 F 00 17
by orientations E and F.
37
