AT1000AM1 - Amplifier Research

160 School House Road, Souderton, PA 18964-9990 USA

Phone 215-723-8181•FAX 215-723-5688

MODEL AT1000A

ANTENNA

150 - 1000 MHz

The Model AT1000A is a wide band, high-gain, log periodic antenna with gain capabilities of 7.5 dB over isotropic

(average) and gain flatness of ± 1 dB. The Model AT1000A supplies the constant, high-intensity fields necessary for

RFI/EMI field testing within and beyond the confines of a shielded room. It can also be used as a receiving antenna for RF

emissions testing. The Model AT1000A is compact and lightweight for ready mobility, yet is built tough for the extra

demands of outdoor use and easily mounts on a flat surface or tripod. The Model AT1000A is intended for use with the

2000W1000 and other high power amplifiers. Field strength generated by the Model AT1000A will be identical to those

shown by the curves for the Model AT1000.

SPECIFICATIONS

MODEL AT1000A

FREQUENCY RANGE .................................................................................150 - 1000 MHz

POWER INPUT (maximum)........................................................................See Graph

POWER GAIN (over isotropic)...................................................................6.5 dB minimum

7.5 dB average

GAIN FLATNESS.........................................................................................± 1.0 dB

IMPEDANCE................................................................................................50 ohms nominal

VSWR

Maximum............................................................................................1.8:1

Average...............................................................................................1.5:1

BEAM WIDTH (average)

E Plane...............................................................................................60°

H Plane...............................................................................................105°

FRONT TO BACK RATIO (minimum)........................................................15 dB

CONNECTOR...............................................................................................See Model Configuration;

SIZE (WxHxD ).............................................................................................102.0 x 13.0 x 91.0 cm

40.0 x 5.1 x 36.0 in

WEIGHT........................................................................................................7.0 kg (15 lb)

MOUNTING PROVISIONS.........................................................................Wall bracket included. May also be tripod

mounted in two perpendicular planes

using optional tripod.

MODEL CONFIGURATIONS

MODEL NUMBER CONNECTOR POWER INPUT

AT1000A 1 5/8 EIA flange See Graph

AT1000AM1 7-16 DIN female See Graph

REV030500