WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-433-5649 • e-mail: sales@wj.com • Web site: www.wj.com
May 2001
SMJ 500-10A
Quad-Diode Mixer
Specifications
Parameters Units Minimum
Typical Maximum
Comments
RF Frequency MHz 2 500
LO Frequency MHz 2 500
IF Frequency MHz DC 500
SSB Conversion Loss dB 5.5
L-R Isolation dB 25
L-I Isolation dB 25
IIP3 dBm +18
LO Drive dBm +10
RF - Return Loss dB 11
LO - Return Loss dB 14
IF - Return Loss dB 11
Test conditions unless otherwise noted
1. Tested in a 50 Ohm System, low Side LO.
Recommended Maximum Rating Ordering Information
Parameters Rating Part No. Description
Operating Case Temperature -40 to +70 °C SMJ 500-10A Diode Mixer
Storage Temperature -65 to +100 °C (Available in Tape & Reel)
RF Input Power at 25°C (continuous) +17 dBm SMJ 500-10A-PCB Fully Assembled Application Circuit
This document contains information on a new product.
Specifications and information are subject to change without notice
The Communications Edge TM
Preliminary Product Information
Product Features
• Input IP3 +18 dBm
• RF Freq 2 - 500 MHz
• LO Freq 2 - 500 MHz
• IF Freq DC - 500 MHz
• LO Drive Level +10 dBm
Functional Diagram
Function Pin No.
Ground 1
IF 2
RF 3
Ground 4-5
LO 6
2
1
3
5
6
4
WJ Communications, Inc • Phone 1-800-WJ1-4401 • FAX: 408-433-5649 • e-mail: sales@wj.com • Web site: www.wj.com
May 2001
SMJ 500-10A
Quad-Diode Mixer
This document contains information on a new product.
Specifications and information are subject to change without notice
The Communications Edge TM
Preliminary Product Information
